Standyby.exe - bad picture message arising and several programs are now no longer works

Similar Questions

• Serching in WMP 11 blocks computer and several programs are incompatible

  When playing a video (no matter the file type), research from one point to another very quickly in order to find a moment special, I want to see, blocking the player. This only happens with videos.

  Here are the technical information of the on menu.

  https://SkyDrive.live.com/redir.aspx?CID=fe0f3e545fb9e34e&RESID=FE0F3E545FB9E34E! 312 & Thierry = FE0F3E545FB9E34E! 200 & authkey =! ANyLfuP8JQbZC8I

  information from dxdiag:

  https://SkyDrive.live.com/redir.aspx?CID=fe0f3e545fb9e34e&RESID=FE0F3E545FB9E34E! 313 & Thierry = FE0F3E545FB9E34E! 200 & authkey =! AP9C4rLX1Ls5xwY

  There are known incompatibilities?

  This is the case with the files of more than 600 MB, the smaller files are ok.

  I tried the sfc command and the boot, but it does not help that much.

  Hello

  1. What is the source of the video files that you play?

  2. you get any error message?

  3. this happens with any other media player installed on your computer?

  4. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Try to reduce the hardware on the graphics card acceleration and check if it works very well.

  (a) click Start, click Control Panel, click appearance and personalization, click personalization, click display settings, and then click on Advanced settings.

  (b) click on the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

  (c) move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.

  (d) click OK twice , and then close the window.

  If the problem is resolved when you set the cursor of None or Basicgraphic hardware acceleration, contact your hardware manufacturer to find out how to get and install the latest video driver for your video card.

  If you have already installed the latest video driver for your video adapter and you continue to experience graphic issues with the Graphics Hardware Acceleration slider sand Full. However, move the graphics acceleration hardware cursor mouse a notch to the left until the issue no longer occurs.

  Method 2:

  Follow the steps mentioned below.

  a. Click Start.

  b in the start search box type cmd and press to enter.

  c. Type regsvr32 msmpeg2adec.dll and press enter

  d. Type regsvr32 msmpeg2adec.dll and press enter

  e. restart the computer.

  Also check out the links below. http://support.Microsoft.com/mats/video_freezes_or_crashes

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error.

  Original title : A major problem with Windows Defender... will not run :(

  When I go to run Windows Defender, I get this message: MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  Then, after clicking OK, you get another small window saying "Windows Defender User Interface has stopped working... Search for an online solution and close the program (which does nothing) or close the program.    WHY?  McAfee scan says there is nothing wrong with the computer... There is something wrong. Impossible to get websites to find, or they are very slow.

  I have VISTA Home Basic edition, Emachine, bought 32 year THAT VISTA was released this January.

  That is to say 9 - seems to work better than 8 (which took awhile to do)

  SP2 is installed and I believe that most, if not all the updates are installed.

  Oh, and no matter what flash supported won't run... little is a nice way of saying. My flash player update. It is mess up until I had to update. :(

  Try the suggestion of Azam K.  If this help not to do the following:

  https://community.McAfee.com/message/208529

  McAfee should have disabled Windows Defender.  If not, or if you did turn back on, you must turn it off.  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off   Windows Defender cannot be uninstalled from the Vista OS, but can be disabled to avoid conflict with other programs.

  You will probably need to uninstall Flash and reinstall it: http://www.adobe.com/support/flashplayer/

  I don't really like to make a negative comment on an anti-malware program, but McAfee has a reputation for sometimes bogged down operating systems.  If your problem persists, you will need to uninstall McAfee (to include using the McAfee removal tool) and see if that has any impact on your computer problems.  If there is an improvement, you may consider trying another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Microsoft tools for restore the disk framentation system, and several others are missing. Is there a way to recover/reload?

  My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this?  I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?

  <(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">

  Hey, take a look at the article and try the steps

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html

  See you soon!

• BlackBerry Smartphones BlackBerry message memory and SIM card are full! Please delete some SMS messages.

  Hello

  typical - just that I was looking to upgrade, I get the following message on my Torch 9800:

  "BlackBerry message memory and SIM card are full! Please delete some SMS. »

  There is a lot of space on the card in the device memory and press. I have deleted many texts and have removed the battery (several times), but the error keeps coming back.

  I am able to text but can't seem to receive - although copies of text messages that I send continue to be saved. I'm having no problem with other forms of e-mail (for example, WhatsApp, Twitter).

  I looked at 3465 Knowledge Base, which advises to uncheck the option "Leave Messages on SIM card", but this has been disabled throughout. (I checked it and saved out of curiosity, which allowed me to receive text only test that I then just sent myself, but after the error message is returned and no other text would come through...) I came back to this area being disabled).

  Any help to fix this would be greatly appreciated.

  When you say you deleted text messages, how have you deleted and how do you think that you have?

  I suggest making a backup with BB Desktop Software. Then, you can use it to do a selective removal of just the basis of message text and see if you can receive messages after that. If you did the backup you can always restore text messages on the device if you want to, although he will crush all new messages on the device.

• Whenever I close my Windows Live Mail, an error message appears and says "Windows Live Mail has stopped working".

  WHENEVER I FARM WINDOWS LOVE MAIL AN ERROR MESSAGE APPEARS AND SAYS WINDOWS LIVE MAIL HAS STOPPED WORKING AND WILL LOOK FOR A SOLUTION THEN IT RESTARTS IMMEDIATELY.   BUT IT DOES NOT STOP ALL I NEED TO DO IS TO CANCEL THE ERROR MESSAGE AND CONTINUE TO USE IT AT WORK.

  PLEASE PLEASE PLEASE HELP - I TRIED ALL SUGGESTIONS POSSIBLE ON MANY WEB SITES.

  original title: I have the same problem - have tried everything but nothing works please PLEASE GIVE a STRAIGHT ANSWER

  One thing you need to know...

  One of the internet labels: do not compose the message in capital letters to entirely. It is considered as shouting and rude. It is also, may be not for you, very difficult to read.

  Uestion belongs you to Windows Live Solution Center. Please post the following link:
  Mail-Forums - Mail Threads section:

  http://windowslivehelp.com/forums.aspx?ProductID=15

• I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

  Original title: I lost the office and all programs-system restore won't work

  I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  Hello
   
  1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
  2 have you made changes on the computer before this problem?
   
  Please answer these questions and to provide more specific information on the issue. This could help us help you better.
  The following articles could be useful.
  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
  http://support.Microsoft.com/kb/318027
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248

• My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

  My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

  Hi Sashaxwp,

  To get small icons in your Start menu

  Click Start on the taskbar, and then select Properties from the context menu.
  Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
  This will display the Customize Start Menu dialog box.
  Use the Option Select an icon of Sice to Programms and now select small icons

  To configure your display appearance, wants to get small icons on your desktop

  Right click on an open area of the desktop and select Properties.
  Click the appearance tab.
  Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

  In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

  Good luck and have a nice day!

  Kind regards

  Rainer

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

  I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

  Yes

• Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and that the program without updates until what yo

  Is - is no longer offers a basic remuneration for it and it's yours for as long as you want with no updates of Adobe?  All programs are now a subscription?  Is it really not possible more to pay only once and the program without updates until you decide to improve?

  You can buy cs6, Creative Suite 6

• Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

  MSSECES. EXE

  My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

  Hi Gary,.

  It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

  Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

  Uninstallation of MSE - Microsoft Answers

  Step 2: To reinstall, refer to the following.

  Virus, spyware & Malware Protection | Microsoft Security Essentials

  See also:

  Checklist for installation of Microsoft Security Essentials - Microsoft Answers

• has changed its name to file my images and all files are now empty and pictures does not open

  I have a WD elements external hard drive plugged into my laptop and I can open is no longer one of the photos stored on my hard drive. Files appear but they were no match for them, and when I try to open, windows image viewer says: the file is empty. I changed the name of the file for my photos (replaced by A - my images to put at the top of the list in alphabetical order) which someone told me can mess things up (if this is the case, a pop-up window should probably stop change me?), so I changed it back. I don't know if the pictures had ceased to work before that date or as a result of this change.

  There are more than 65,000 files in my pictures, including pictures of my little boy that I have anywhere else, so it is extremely important to me that I have the files. Please help me!

  Hello

  If you don't get any other suggestions, use the free version of this program to recover your photos:

  http://www.Piriform.com/Recuva

  See you soon.

• XP system is extremely slow start and open programs are more inadmissible

  Is anyone know the problem / answer?
  My XP Sp3 has EXTREMELY slow start and programs are mostly non_responsive. When I close the programs they Peel the top of the screen down. Can you help me?

  * original title - screens XP Sp3 frozen, non-resonsive programs, peeling *.

  Hi dmahu,

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What happens when you try to open the programs?

  ·         You receive an error message/code?

  ·         What security software you are using on the computer?

  ·         Do you have too many applications on the computer installed?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, restore your computer to a Normal startupmode.

• My HDD is getting smaller and my files are endangered or not working do not at all

  Hello

  My C: / drive is shrinking more small and smaller every day. Sumultaneous with that, my files are becoming extinct (especially photos and music, but also Office files) almost as soon an I can create them. Finally, I am the only owner and user of my computer and I am the sole Director. More, I get messages from different programs telling me I do not 'have access"to the program, or that I have to get permission from"Trusted Installer ".

  I wiped my hard drive twice in two weeks and reinstalled the operating system (Windows 7 sp1) this is not enough, and when I reinstall my private backup files, they disappear! I lose more valuable things for me.

  In addition, the D: / recovery drive will not let me touch and is completely filled. So I'm not "allowed" to do a file recovery or a system recovery or repair.

  Help!

  Hello

  My C: / drive is shrinking more small and smaller every day. Sumultaneous, my files are endangered (especially photos and music, but also Office files) almost as soon an I can create them. Finally, I am the only owner and user of my computer and I am the sole Director. More, I get messages from different programs telling me I do not 'have access"to the program, or that I have to get permission from"Trusted Installer ".

  I wiped my hard drive twice in two weeks and reinstalled the operating system (Windows 7 sp1) this is not enough, and when I reinstall my private backup files, they disappear! I lose more valuable things for me.

  In addition, the D: / recovery drive will not let me touch, and is totally complete. So I'm not "allowed" to do a file recovery or a system recovery or repair.

  Help!

  Hello

  Recovery partition full.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  _________________________________________________________________

  Possible malware.

  Search for malicious software, because you don't tell you have an Antivirus installed with these relocations.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@

  Missing hard drive space

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware can hide personal data:

  http://www.bleepingcomputer.com/download/Unhide/

  Display is a program that goes back changes made to your files and the Windows registry by the rogue. FakeHDD family of fake anti-spyware. This family of malware is posing a disk optimization program system hard and repair for Windows. In reality, however, these programs are computer infections that deliberately to hide your files and change some settings in the Windows registry to make believe that you have lost data on your hard drive. It will then prompt you to buy the program to restore the data.

  See you soon.

  :