Star Trek Armada II are not enough memory error

Similar Questions

• Not enough memory error

  All,

  I get an error when I try to start a 4th guest who says that I don't have enough memory.  I'm pretty sure that this is not the case.  My pc has 16 GB of ram and clients are configured with 2 GB of memory each.  Because three guests starts very well, by my calculations I use 6 GB.  Some Go for Windows & workstation figure in overhead and I'd still be able to on the 4th guest.

  When I had only 8 GB of RAM, I was able to turn two of the guests going up to 16 GB should get at least a two other guests when they are set up to 2 GB each.  This should be only 8 GB of RAM for the guests, leaving the other 8 GB for Windows and work stations.

  Am I missing something?

  Workstation = 7.1.4 build-385536

  Windows 7 x 64 with SP1

  Adam

  Take a look at this - should help the optimization of memory for my computer: http://www.techrepublic.com/blog/virtualization-coach/all-about-memory-optimization-in-vmware-workstation/155

• Troubleshooting not enough memory error

  I get an error of memory and while there are tons of posts about this on the forums, I had a few more questions. First of all, I have two cRIOs and think that the error would have been thrown by one of them. Is it still possible if? I'm trying to narrow down what exe, the error may be in. Secondly, is there an order of actions they take when they get these errors to help out them?

  Found the REAL problem! I was not reading my header correctly, this resulted in type casting the bad data bytes. Every now and then I would be casting of data type byte that when type cast from a string to an I32 caused a number about 17 million. I guess that the TCP read trying to malloc memory (or new if its c ++ ) and has been unable to do. That's why I got the low-memory error. When I started to read my TCP bytes correctly, the error disappeared.

• iphone 5 c upwards - not enough memory error

  Plugging my iPhone 5 c to synchronize with iTunes on my desktop (you want to create a restore point) but I get an error message of not having enough free space on my computer - try to delete files and remove the trash.
  I did it, but he has not made a difference (trash is empty and iPhone has 11 GB of free space). I tried to reset the phone, turning the computer power switch & always occurs the same message.
  iPhone software 9.3.4 and iTunes is 12.3.2 - I know the new ios 10, which I don't want to download as we have very limited her download limit.
  Any suggestions?

  Hey there BonesKel,

  I understand that you have a problem with your ability to upgrade to iOS 10 because you cannot create a backup on your computer. Looks like you have enough free space on your iPhone, but you have not enough free space on the computer to allow a backup of your iPhone to reside there. I have a story for you that will help you to free disk space on your computer, allowing you to create a backup iOS through iTunes and continue the update process:
  

  OS X El Capitan: increase the disk space

  Don't forget that you can always use iCloud to keep a backup of your device iOS as well:

  iCloud: back up your device iOS to iCloud

  Thank you for coming to Apple Support communities and have a great day.

• "Not enough memory" errors on Illustrator CC 2015.3

  I get questions constant 'insufficient memory', making even small adjustments, usually followed of a crash.

  Tried the reassignment of work to a larger disk drive, no change.

  Stick with 2015.2.1 for now.

  Hi all

  We found that the reason for this dialog box only Illustrator (2015.3) seems to be in conflict with some commercial applications of currently running on the system Clipboard.

  If you encounter this problem, then please try to exit the Clipboard utility & then try to use Illustrator.

  Please drop a mail to [email protected] if this doesn't fix the problem.

  We're investigating this issue.

  Kind regards

  Rambour Singh

  Illustrator team

• Adobe Illustrator CC 2015 not enough memory error (vivid RAM)

  Hello world

  I use Adobe Illustrator CC 2015. I opened the file and I was working, when I decided to save my documents I got this error message. Someone who knows? How can I solve this problem? Thank you

  

  quit out of any other open application to see if you can save your document.

  How much RAM do you have? What else is open?

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• Not able to play Star Trek Armada 2

  trying to play a game compatible with xp on windows 7 and will not work. solutions?

  Trying to play Star Trek Armada 2 on windows 7 and it won't work. solutions?

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Marilyn

• Windows 7 64-bit with Star Trek Armada 2 edition compatibility issues

  I have a HP DV6-1355dx and I have had issues running programs on Windows 7 64-bit edition and don't like it. First of all, I have a games for Windows 95, 98, XP, Vista called 'Armada of Star Trek,"'Star Trek Armada II Demo', 'Star Wars Galactic Battle grounds - Saga Edition', and I also have a programe of game production animal called"Game Maker 7. With the games in Star Trek, they install OK but when I try to play them they say I don't have enough virtual memory, they all have two needs a minimum of 256 MB and a recommended amount of 1 GB, and according to my computer, I have 8 GB of virtual memory. With the Star Wars game graphics are stripped but the graphics card of computers more is sufficient to support because my computer call supports the 1080 p 3d graphics and the game is not HD or 3D. The programe "Game Maker 7" guard back to the version lite free of the paid Pro version, but it doesn't on my HTPC Windows 7 family 32-Bit, I also on, and it does not show some programs tap tiles, but they appear on the HTPC, so do you know what could be the problem, I know it something to do with the 64-bit operating system part , but I don't know if it's just that or not. I have also contacted HP and YoYo Games (Game Maker 7) and expect them here. I would appreciate it if you could help me at least pushes the problem wrong.

  Hi Sharp955,
   
  Yes, the game Star Trek is not compatible with Windows 7 64 - bit edition. However, it is compatible with the 32-bit Windows 7.
  For more information, see Compatibility of Star Trek
  For further assistance, please contact the game manufacturer support team:http://support.bethsoft.com/
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TCP IP not enough memory

  I do tcp ip asks the customer side my executable (not in development mode I test my development mode my client application does not show enough memory but in application .exe it shows not enough memory very soon). Is there a solution to this i have also added late next to Scripture. one more thing my usuall data packet size is 200 to 300 bytes. and a few times I got a big one given to b received as 589513793 bytes.

  Yet one thing my executable perform well on desktop rather than laptop and win xp as win 7.

  Thank you for the time and help

  concerning

  Why don't you use a timeout on the TCP, playback function? Chances are that you lose your framing and playback four bytes could be the data packet, depending on how things are running hight. Try to set all the timers TCP-1.

• Not enough memory to complete this operation.

  I had a glance through the assignments to the title of this topic and no solution to the error that I am experiencing.

  My LabVIEW application runs on a windows 7 PC and receives messages from an application running on tha RT PC LabVIEW TCP/IP.  These messages from 4 k to 7 k bytes in length and reception are queued in the comms TCP/IP thread and removed and converted to the appropriate data type for display on the front panel in another thread (design of producer/consumer).

  After running for between 1 and 24 hours, one or more "not enough memory to complete this operation.' dialog boxes are displayed.  This interrupts the execution of the application, but these closing dialog boxes allows the application to continue running.  What I find strange is that if there is not enough available memory how is possible for the application to continue running. Windows resource monitor display shows that there is always some 1.1 GB available.  Also, what is strange is that there no noticeable change in memory is committed to my application.  I expect that if I had a memory leak which committed memory would slowly creep upward. If I need extra RAM in this PC or adding RAM will increase just enough time between errors?

  My system specs are as follows:

  Dell Optiplex XE Intel Core 2 Duo CPU 3 GHz / 2 GB RAM running Windows 7 Professional 32-bit

  LabVIEW 2010 SP1

  Any help would be appreciated.

  Kind regards

  Rob

  Dear Rob,

  Same problem, I was faced with one of my applications.

  Give some delay in your writing RT TCP loop. RAM is fine no problem with your RAM. If you connect to your data file, you found after some time, you get some unwanted characters on the TCP/IP Protocol these unwanted characters increase your data to read size. So to avoid this gives some delay in your cRIO TCP send loop.

• EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  , can not send email - message says may be installed incorrectly and

  EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  ox80070002.   What to do

  See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com

  Steve

• What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  Hi Jerome,

  ·         You receive the error when you try to print?

  If so, check to see if the following helps you.

  Run the next Fixit tool to check the issue.

  Problems printing and printing errors

  If this isn't what you are looking for then respond with more information so that we can help you best.

• Not enough memory, but only one partition is almost empty. running Windows XP Home Edition

  My computer says there is not enough memory available to perform the printing.  When I tried to defrag, there is not enough memory to perform this function, either.   Several years ago a friend introduced (then new) computer with 2 partitions - C and F drive.  Everything I've done seems to be on the C drive.  Now the C drive = 935 MB free of 19.52 GB of capacity, while F = 56.62 free 56,79 GB GB.  How to release the rest of the disk on drive F?   There are a few things here, and reading of 'aid', it seems that they would be removed if I deleted a partition.   This computer is now my husband, who use it for e-mails, play Spider and a few Google searches.   I'm no computer expert, so I'm hoping for a simple solution.

  Marjorie

  Your report reveals a number of issues. Your C partition has only 4% of free disk space. You must have a minimum of 15% but preferably 25% of free disk space.

  Normally, the report will contain details of your MFT (Master File Table), but this information is not there. I have not encountered this situation before and at the present time, I do not know its importance. The MFT is a master index of all the files on your computer and their location, which allows the operating system to access all the files needed to perform a given task.

  The reference to the DC4.bak and similar files may be indicating a problem with your trash. This is where deleted files are stored temporarily until the user decides to permanently remove the files. The update of Windows XP SP3 is installed? Right click on your my computer icon and select properties to view details. There were three MS updates and you may not have the latest updates.

  Your version of AVG is obsolete. You have version 8 and the current version is 10.

  You use Outlook Express, and it takes a considerable disk space. You can move the folder to your partition F store. This link explains how:
  http://www.insideoe.com/files/store.htm#movestore

  You can increase the free space on the disk by deleting restore points, keeping the last restoration, using disk cleanup. Follow the instructions on how to do it.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point.

  I recommend you download and install cCleaner, which is a best utility disk cleanup, but this would be better done later.

  You can create more free space in C by performing the steps suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  When you have completed the above, restart your computer and display a new report Disk Defragmenter as well as answers to the different questions, I asked.

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.