stars and counter

Hello

I tried reinstalling my iMac with an own Sierra. To prepare, I saved my itunes on a NAS file.

When I restarted itunes I restarted with the database, I have saved but lost my credit rating as well as the number of times, I listened to my songs.

How can I recover the stars and the meter?

Thank you

Fabrice

Hi fabrice,.

I believe that this information must be stored in one of your original iTunes folder called "iTunes Library.xml" XML document (or maybe a few close variant, if it was created by an older system). If you can locate this file, you can import it as a normal playlist: file > library > import Playlist. I'm not 100% sure it will work, because I don't know anything about SIN.

Tags: iTunes

Similar Questions

  • How to delete favorites at the top of my calculation? I double click on the yellow star and it gives me an option to delete it but then when I click on the arrow to the right of the yellow star, that the web page is displayed again?

    Upward at the top where you put in the web site that you are looking so that it stores. I double click on the yellow star and it gives me an option to remove this site. However I can't do something just because it is not delete it.

    Hi SKennedy1311,

    There are several ways you can remove sites the location bar AutoComplete drop-down. It is probably easier for you to see than to explain. Take a look at the Awesome Bar - find your Firefox bookmarks, history, and the tabs in the address bar. This article will give you all the information you need.

    Hope this helps!

  • Laptop HP 15-r030wm: I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about how Tablet but idk how t

    I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about fashion Tablet but idk how to remove the keyboard. I have a Tablet one mode I tried but it work I would like to touch or use a pen?

    HP 15-r030wm Notebook PC (ENERGY STAR)

    Your laptop lacks a touch screen. Simply turn the Tablet mode is not capable if the material is not there.

  • Amnesty International and counter sync + USB signal stream (USB-6210 vs USB-6341)

    Hi all

    I'm at a stage of identification of a material suitable for the following tasks:

    • 5 analog inputs (AIs) of reading at the same time, tensions at a rate of kSps (at least) 10,
    • application captures 2 inputs using timers (detection of contours with timestamps), square wave entry with duty ratio of 50 percent and about 1.5 kHz frequency and variable pulse width / frequency (from 2 sensors hall, representative of the DC motor rotation speed and direction, quadrature signals), resolution of timestamps should be (at least) 50 ns,
    • AIs and counters should behave in a deterministic way, and must be synchronized in a way,
    • data to be transferred via the USB port of a host computer with Matlab Data Acquisition Toolbox (unfortunately not LabVIEW).

    I've identified the long USB-6210 USB-6341 and potential candidates of material to accomplish the above tasks, but after reviewing several documentation and the topics of the forum, I'm still a bit confused, if both are fully working and my approach described below is not working properly.

    Counters: I intend to use the internal time base available 20 MHz as being the source of meter to get into account the resolution of timestamp 50 ns. External impulses hall are used as sample clock (about 1.5 kHz, see above). As the pulse width varies, the sample clock is not constant.

    AIs: Using a 10 kHz internal clock signal derived from the time base of 20 MHz for timing and analog inputs (trigger) start-up and counters simultaneously material should translate into the required synchronization and deterministic behavior.

    It work? Other recommendations?

    Next is the USB data transfer: all HAVE 5 and 2 data entry of the meter must be correctly transferred to the host computer (the corresponding rates are shown above). USB-6210 is capable of 4 USB signal flow, device USB X range (6341) offers 8 of them. Unfortunately, I could not understand the exact meaning of the expression "signal flow" still. Do I need 1 flow of input signals (would be 7 for my application described) or 1 stream for all analog inputs and 1 for counter inputs (lead 2 streams for my request). Is there no further details on this approach (more than Streaming of signals of NOR) USB signal flow?

    Any challenge to the described application that I might have forgotten? 6210 USB seems to a very limited number of entry PFI, maybe even too low for my meter participate application?

    Looking forward to your comments and advice.

    Concerning

    jAwA

    1. I recommend the X-6341 series on the M-series 6210 sake of counters/timers.  It is more of them, and each of them is more capable.   It can also have a great FIFO embarked for meters that may be important in certain tasks, although I don't think that you currently deal with one of them.

    2. your general concepts on timing & sync are satisfactory.  You will be able to share and to route signals that help ensure synchronization and determinism between the timestamps for your various tasks.  Note that for meter entry tasks, you need set up the trigger 'Arm Start' rather than the regular start trigger.

    3 is not authoritarian, but I believe that the flow of signal # will correspond to the tasks #.  For you, it would be 1 task of HAVE and tasks CI 1 or 2.  (Not clear if you have 1 Encoder with 2-channel quad that would require 1 task of CI, or if you have 2 encoders with 4-way quad).

    4. pay attention to the hall effect signals that are not virgins.  Digital filtering is available and probably better on the X-series, the series M.

    5. strictly speaking, edge detection is a type of digital input task that produces samples but no timestamps.  Ideally, I would like to parallel wires on the two digital inputs for the entries of detection and counter change to position quadrature decoding.   Then I would sample the counters Encoder 1 or 2 using the internal pulse 'event of detection of change '.  I would create another counter timestamp change detects pulses as well.

    -Kevin P

  • HP envy 15j012la: win 10 update stay at 55% for 5 hours and counting

    Please help me im sure something's wrong, "windows setup all the update 10 55% disable" its been 5 hours and count on this screen.

    Hi @Zarped ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-j012la Notebook and problems with it does not not with a Windows 10 update. Try perform a reset.

    When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

    It should continue where it left off.

    Please let me know how it goes.

    Thank you.

  • 6143 - PCI or PCI-6133: simultaneous reading of analog, digital, and counter

    Hello Board,

    I want to use a PCI-6143 or 6133 to acquire permanently synchronized values ports analog, digital, and counter on the same device.

    I use vb.net to build an application that reads the values of the device buffer and stores them in lists for later use.

    By reading some other threads I discovered, that all the S series devices are able to use a source of material for the release of the digital ports.

    Here are two among them? What meter ports, they suffer from the same problem?

    Software trigger is no option because the sampling rate must be accurate.

    Thanks in advance for the answers,

    M.B.

    Hi M.B.

    6143 does not support Correlated DIO (i.e. clocked by the hardware), the 6133 (see-> digital I/o--> Timing). As a result, synchronized doing of entry works with the latter. Acquisition of meter in the buffer is available on both devices. The 6133 also authorizes analog and digital triggering.

    To synchronize these tasks, you need to export a clock signal (sample clock HAVE for example) and take to the DIOs and counters for an acquisition in the buffer. An example for synchronization of AI and DI is given once you install the DAQmx driver in the folder when you are using Windows XP. Maybe you can start with that and gradually add your features.

    Please let me know if you need more specific information.

    Kind regards

    Peter

  • My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.

    My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting.  I'm worried to turn it off because I don't want any major problems if it works again.

    Can someone please advise on what I have to do to go even faster.

    Thanks for any advice in the meantime.

    As a result of the survey above.  I 'bit the bullet"and shut down the computer and no damage seems to have been made.

    Time will tell I suppose.  Thank you

  • What is the difference between Count (*) and Count (1)?

    Hello

    can you please what is the difference between Count (*) and Count (1)?

    I saw that Count (*), Count (1), Count (2)... etc return values from a table. Is there an exact difference between them?

    Have you read the forum space FAQ? I'm sure that you don't have because it is answered there.

    It is also answered via Google.

    The short answer is: there is no difference, unless you use count (1), count (2), etc. instead of count (*) it makes you look like an amateur.

  • Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired,)

    Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired, haha)... hoping someone can help, please and thank you

    You can try with below steps if you want:

    Folder Temp light 1).

    (2) close all running Applications.

    (3) close webistes all opened browser.

    (4)disable the firewall temporarily.

    (5) open only Adobe Web site as it is safe and secure site free of all kind of threats.

    (6) then try to download CS 6 Design Standard and check.

    Note: Though the firewall is disabled. do not open applications, files or even other Web sites.

    Or if you think it is still very slow and would not turn off the firewall , you can try with 3' rd party like download managers: IInternet Download Manager , which is more efficient than the browser built in downloader.

  • selection of special days and counting

    Hi all
    I need to select certain dates and the following days with the same criteria.
    An example would be:

    CREATE TABLE DEMO
    (
    EMP_ID NUMBER NOT NULL,
    WORKING_DAY DATE NOT NULL,
    ACTIVE_CODE NULL VARCHAR2 (1).
    CONSTRAINT DEMO_PK
    KEY ELEMENTARY SCHOOL (EMP_ID, WORKING_DAY)
    USING INDEX
    )


    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('01.11.2010 00:00:00 '), '_');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('02.11.2010 00:00:00 '), '_');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('03.11.2010 00:00:00 '), 'K');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('04.11.2010 00:00:00 '), 'K');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('05.11.2010 00:00:00 '), 'K');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('06.11.2010 00:00:00 '), NULL);
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('07.11.2010 00:00:00 '), NULL);
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('08.11.2010 00:00:00 '), 'K');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('09.11.2010 00:00:00 '), '_');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('10.11.2010 00:00:00 '), 'K');
    INSERT INTO DEMO (EMP_ID, WORKING_DAY, ACTIVE_CODE) VALUES (123, TO_DATE ('11.11.2010 00:00:00 '), '_');

    Now, I'm looking for the first day with Active_Code = 'K' and count the days that have 'K', too.
    Expected result: November 3-> 4 Ks (because the 8 is after the weekend); 10 November-> 1 K

    I hope that the example/explanation is not too bad...

    I built a procedure which was to count the occurrences, if I give the first occurrence (here the 3rd and 8th).
    But findign the first 'K' is my problem.
    A solution would be:
    AND
    (SELECT T2. T2 DEMO ACTIVE_CODE
    WHERE T2. EMP_ID = T1. EMP_ID AND T2. WORKING_DAY = T1. WORKING_DAY-1) <>'K '.
    AND
    (SELECT T2. T2 DEMO ACTIVE_CODE
    WHERE T2. EMP_ID = T1. EMP_ID AND T2. WORKING_DAY = T1. WORKING_DAY-2) <>'K '.
    AND
    (SELECT T2. T2 DEMO ACTIVE_CODE
    WHERE T2. EMP_ID = T1. EMP_ID AND T2. WORKING_DAY = T1. WORKING_DAY-3) <>'K '.

    But it is pretty darn imperformant if I'm dealing with millions of records :-(

    Could someone please give me a hint on how to solve this problem?
    Thank you.

    Best regards
    Christian

    Hi, Christian,.

    Assumiung you have exactly one line for each working_day (where active_code is not NULL):

    WITH     got_grp_num     AS
    (
         SELECT     emp_id
         ,     working_day
         ,     active_code
         ,       ROW_NUMBER ()
                      OVER ( PARTITION BY  emp_id
                          ORDER BY          working_day
                        )
               - COUNT ( CASE
                       WHEN  active_code = 'K'
                       THEN  1
                   END
                    )     OVER ( PARTITION BY  emp_id
                          ORDER BY          working_day
                        )      AS grp_num
         FROM     demo
         WHERE     active_code     IS NOT NULL
    --     AND     ...     -- Any filtering goes here
    )
    SELECT       emp_id
    ,       MIN (working_day)     AS first_day
    ,       COUNT (*)          AS cnt
    FROM       got_grp_num
    WHERE       active_code     = 'K'
    GROUP BY  emp_id
    ,       grp_num
    ORDER BY  emp_id
    ,         first_day
    ;
    

    I'm guessing on the emp_id role in this problem.

    The trickiest part of this problem is to obtain an appropriate value for the GROUP BY.
    When you have several consecutive lines of 'K', the difference between the ROW_NUMBER (in cash lines no 'K', but not weekends) and the number of lines of 'K' previous will be constant. This is what grp_num is. (A non - adjacent lines 'K' also has the same grp_num, but that's OK, it will be rejected by the WHERE clause in the main query.)

    Published by: Frank Kulash, November 4, 2010 05:43

  • Worn and counting on the same query?

    I have a table with the following fields: groupname, FULL_NAME, DEFAULT_X, SUPPORT_GROUP_ID and PERSON_ID (among others)
    A user (PERSON_ID) can be different times, they appear once for each group (SUPPORT_GROUP_ID) that they are assigned to.
    When the DEFAULT_X == 0, this means that the user's default group is on this line. Each user should have only one only by default the group, but for some reason, the table was corrupted and there are a few users that don't have a default group.
    What I'm trying to do is to select all the users (FULL_NAME, PERSON_ID) where the PERSON_ID COUNTY is equal to the SUM of DEFAULT_X
    It sounds easy enough, but I don't even know where to start.
    Any suggestions?

    Hello

    So you say
    default_x = 0 if this is the default group, and
    default_x = 1 in all other cases
    Is this fair?

    If so, you can say:

    SELECT    person_id
    FROM      table_x
    GROUP BY  person_id
    HAVING    COUNT (*) = SUM (default_x);
    

    HAVING is similar to WHERE, except that HAVING is applied after the merger took place and functions of aggregation (like SUM and COUNT) were calculated.

    However, your problem is that default_x is not entered correctly. If default_x is sometimes 1 to 0, are not concerned it may contain other errors, like having 2 or - 1, whereas she would have to have 1?

    Here's a better way to find person_id who don't exactly have a single line with default_x = 0:

    SELECT    person_id
    FROM      table_x
    GROUP BY  person_id
    HAVING    SUM
              (
                  CASE
                      WHEN  default_x = 0
                      THEN  1
                      ELSE  0
                  END
              ) != 1;
    
  • In Firefox 40 I can no longer click on the Blue Star and open the Bookmark dialog box

    When the current page already contains a bookmark, this one by pressing Ctrl + D also does absolutely nothing.

    Fix regressions. Please add automated tests to catch these regressions in the future.

    Thank you very much for all of your volunteer work very hard on the browser.

    Hi WalterGR, for me, 40 Firefox works in the same way as previous versions. One click adds a bookmark in the bookmarks unordered folder (you see the animation of the star in the list). A second click opens the Panel to modify bookmark. CTRL + d also works normally.

    Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

    If Firefox is running: You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    and OK reboot.

    Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

    Any difference?

  • Accidentally right click the Blue Star and now he's gone. How can I get that back?

    I was looking for a way to put the bookmark in the right category. Right click and then I think I clicked on one marked 'menu of options', but I do not know because at that time there closed the dialog box and the Blue Star is no more.
    I can't find any instructions to use the new options of customization, mentioned in stories about 29.

    Just go to the Menu bar (press F10 or Alt to the unhide) now go to view > > toolbars > > Customize > > look right, look for favorite icon, the drag and drop in the toolbar.

    I think when you click in the option to switch to the menu.

  • My Bookmark star and the toolbar is where?

    I have no top toolbar - only my Home Page tab. I also have no star by the icon of the House at the top of my page on the right. How to make a comeback?

    I have to add:

    • If none of the menus or toolbars appear at all, you can use the F11 function key to get out (and later re-enter, if you wish) mode full-screen.
    • To turn the different toolbars on and off, you can use one of them:

      • Right click on an empty area of the bar tab (or the new tab "+" button)
      • Press the alt key > menu view > toolbars
  • I want to generate a pulse of a meter train and count the pulses with the other counter on a USB NI DAQmx 6259.


    Salvation;

    Here is the solution for your problem.

    The cause is that "Gen dig Pulse Train-Finite" uses Ctr0 both Ctr1.

    Please refer to:

    "When you do a finite pulse train generation, a counter generates pulse train, and the other counter generates an impulse that acts as a barrier to the first counter. If you change the pulse train to generate continuously or

    only generate a pulse, you can run two tasks of meter at the same time without error. »

    http://digital.NI.com/public.nsf/allkb/04BEDD9E9E91ED3486256D180048116D

    I used Ctr0 and Ctr2, jumping Ctr1 as it is reserved by "" Gen dig Pulse Train-Finite ". I works very well.

    Kizito.

Maybe you are looking for

  • Error webcam not connected Satellite A350

    Hello, bought a new monthe Satellite A350 and cannot use the webcam with MSN. I tried new drivers Toshiba webcam and webcam not connected message. I have also tried to dsintall and install the drivers webcam still not connected. Sound with MSN is ok.

  • Do not receive messages from sms for voice mail notifications - problem apple ID

    Hello For a while I have not received the text notifications for voicemails left on my phone. I did a factory reset and then configure the phone as a new phone, and I received notifications of text. I then registered in my apple ID and stop notificat

  • How to turn on the printer? Said to work in offline mode, how do I get it online?

    My computer says that my printer is offline? How can I change the settings is back online? I don't know why he changed? It has just stopped printing.  Help!

  • AM that I updated my DB? (with lsinventory)

    I made a request patch 20760982 which is an update of db to 11.2.0.4.7 POWER supplyAfter you create a new database and give it a query "select * version of $ v;There is 11.2.0.4.0, why?sqlplus #from----------------------------------------------------

  • My entire start menu is MIA

    OK... so... Tip 2 weeks before I got my Q classic by post and put in place a prepaid plan I had before. I quickly realized that even if I n; t using the internet that money has always been deducted frm my phone. The next day I called to see how much