Start button / stop

Similar Questions

• My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi

  My habit of HP G62-455DX' turn on. but the Start button / stop flashes with indicator led F12 or wi - fi. u ' is the problem with that? Help, please. Thank you...

  Perform a hard reset on the phone. To perform a hard reset, follow the steps below

  • Unplug the PC laptop AC adapter
  • Remove the battery from the laptop compartment
  • Disconnect external devices or devices connected to the laptop. Press and hold the power button for about 15 seconds

• Options for the power button Windows XP to ask what I want to do when the Start button / stop is pressed

  Original title: Start button / stop - "ask me what to do" - where is it?

  Under XP, when I pressed the power button I could put it "Ask Me what to do." This is very useful for two reasons:

  -My PC is under my desk, and if I'm not careful, I can press the power button with my knee...

  -To turn off, I can hit the power button / stop rather than start etc, then choosing.

  The feature exists on Windows 7 (press alt + F4), then how do you link that to the press the power button? Why this was removed?

  See you soon,.

  Chris

  Hello

  Yes, there are only work-a-rounds and that is why I suggested that
  thread. There are also a few details about why he was abducted that
  are especially that in general as it caused more problems than it solved. Then
  for those who have used the function correctly, it is a concern when trying
  to restore its functionality. To my knowledge, is not 100%
  this case, just ability cannot be added in by a registry setting
  as support has been totally removed. If this is the case, then the work - a-
  towers or possible 3rd party solutions are the remaining options.

  Please let us know if you find a better solution.

  I hope this helps.

• T400: Start button / stop does nothing in Vista

  Hello, I start button / stop set to "turn off computer" in the Power Manager settings, but when I press the Vista power button nothing happens. I use Vista 32 bit SP2. The power button turns the computer very well and of course now that it performs a closed hard but he executes any action when you press right on it.

  Holding for 1.5 seconds will shut down normally (assuming that you have defined at the stop) and now it for about 5 seconds or more will make a stop 'hard' who just turns off everything without a load.

• spectrex360: Start button / stop / flashing laptop won't turn on

  I just got the HP spectrum x 360 on the Store of MS (signature edition). The power button on the side flashes and it won't turn. I know that the battery is charged, because it is connected and there is a connedtion that the led is lit when the power cord is connedted to the laptop. But the power button continues to blink and I can't turn on the computer. I tried to tap on the screen and the Microsoft keyboard key. Any way to reset this? Thank you

  OK, I found the answer. It was a hard reset. Just hold the Start button for 20 seconds (or until it no longer flashes) then wait a bit and you can restart the laptop.

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Windows XP SP3: Hang all night @ "Windows is shutting down"... "Start button / stop is my only option?

  I don't know where else to ask this... been going from one site to the other, books, etc., for hours looking for titles of threads that fit, but always leave out this something... medium or average power down.  do not use the power button, except if no other option out there.

  When I left my pc last night, everything seemed fine.  I decided to leave it on and not yet started to disconnect, etc..  Not sure if there was anything during the night (update?) which requires a reboot, but, when I'm happened to pc this morning it was hanging at the "Windows is shutting down" screen... "Windows and continued so for a few hours I tried to understand.

  This happened to me for the first time last week.  I don't have another source to the internet at the time, so I have 'given' and ended up using the power button.  I rebooted and immediately stopped to see if it would happen again, but everything was fine.  (Knew I should have troubleshooted!) The pc seemed so far.

  I read a number of suggestions to solve problems in other posts, but they all begin with the assumption that the pc is in a State of "exploitable".

  Step # 1 is need now is my only option to turn off, forcing a stop down with the power button?

  I'm going batty at this stage.  Any guidance appreciated.

  It might be.

  I know that superantispyware does not remove itself completely as you use their uninstaller or add/remove.

  Obviously, it's one of their drivers still installed, you must remove this item and then check if you still have a problem.

  Post back with the results.

  There are several posts on this problem, perhaps one of them will help you if removal of the driver does not.

• Start button / stop play ringtone

  Hello

  Yesterday, I bought the Z5 and if I hold down the power button, my ringtone started playing.  If I pressed again, it will start playing again on the other ring and my only option is to use the key to toggle to turn off the sound, but when I turn the volume to the top it will still play so my only option to stop it is to restart.  It is whenever I have press and hold the power button.

  If someone could shed some light, I would be so grateful!

  Thanks in advance.

  Go to settings-accessibility and see if the accessibility shortcut is activated.

• Pavilion 15 laptop: Start button / stop does not turn off

  After the upgrade to windows 10, "sleep" mode did not work, however a windows update corrects this problem. The only problem I have seen today is that when I stopped my laptop the power button stays on your battery and I have to manually turn off (by pressing for 5 seconds).  What I do is turn on the computer again and stop it again, and then it turns off completely. I m afraid that force close down may harm the computer.  As info... I bought my laptop this year, came with windows 8.1.  Any help? Thanks in advance.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
     • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
     • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
     • In Control Panel, select administrative tools, and open Services.
     • Go to Windows Update and double-click it to view its properties.
     • Click on stop to stop the service to run.
     • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
     • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• Satellite L755D: Start button / stop static is red when I stop

  I have a Toshiba laptop, L755D.

  Recently, when I stop the laptop and turn off the power, the power led turns on a few seconds after stopping.
  He remains a static red color until I connect upward when it returns to normal color blue/white.
  While the stop of the battery loses the power of 1 to 2%.

  Can anyone help please?

  > While the stop of the battery loses the power of 1 to 2%.
  Check this box:
  Why lose 2 to 4% battery by turning off then back on my mobile device?
  http://APS2.toshiba-tro.de/KB0/FAQ9C012L0001R01.htm

  It is normal for a unit to lose between 2-4% battery, when to stop and reverse.
  Battery re-gauge it's self when starting back from an engine out of State. An accurate reading of the battery can take up to 5 minutes.

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Atrix: Start button / stop should turn off videos?

  Is this normal on android?

  I start a video of youtube and after the beginning of the video, I press the power button to put the phone to sleep.

  Continuous video playing, the volume.

  When an application is running in the foreground the sleep button only sleeps screen and not sleeping the cpu.

• Start button / stop is stuck on Satellite P20 after pressing on it's too hard

  Hello

  I have Satellite P20 and pressed the power button to hard and now it's stuck in there.
  What happens now is when I power up it starts and closing.

  How can I fix the button, someone has any ideas?

  Best regards Anders

  Hi Andres

  I think that you don't need to look for the answer in the forum. For me, it makes sense that the laptop must be disassembled and the button should probably be replaced.

• Start button / stop Wag54g2

  Excuse me because of my language

  I have a few questions:

  Wag54g2 modem must disconnect the power supply when we don't Wan to use it?

  Can 2. how I upgrade the firmware? (I got the image file, but it does not work)

  Is it have mode button instead of the market position / stop?

  Thank you very much

  If you don't want to use your router, you can unplug the power from the back of the router... The router does not have a Standby button, you must unplug the power of the router...

  Update the firmware on your router follow the steps below.

  Open a page in Internet Explorer browser on a computer hard wired to the router... In the address bar type - 192.168.1.1... username password In & use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Start button / stop flashes

  What does it mean when the light around the power button flashes only instead of starting the computer?

  so without spare parts lying around, I should try to find a guaranteed repair... shop in Ecuador... wish me luck!

• HP Deskjet 2514: Start button / stop flashes when I try to scan HP Deskjet 2514

  I had a problem where my printer would not prevent printing, even though I cancelled it.  I watched and followed these instructions.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  I didn't know that one to remove, so I deleted everything in the folder.  Now, my printer prints, but whenever I try to scan something, my power button flashes and it won't scan.   Help, please!

  Hi @Donna924,

  I read your post and see you were able to solve the problem for print jobs would not cancel, but now you are unable to scan. I'd love to help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically. This software will also troubleshoot jobs stuck in the queue, which you could use in the future if the problem persists.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.