Start LabView menu
I have a teststand sequence that uses run asynchronous VI to display output to the camera while the sequence is running. When the sequence runs the first DUT the Menu start of LabView (see attached Image) rises and covers the entry window of the UUT. Once the Start Menu of LabView is reduced to a minimum, everything goes well until the test sequence is stationary then turns the Start Menu of LabView. Y at - it anyway to keep the Start Menu of LabView always minimized or even better make sure it never comes upward during the execution of the sequence. I spent hours trying to reconfigure LabView and TestStand with no luck. It comes to cunfusing for operators to use
Hey Jimbo,.
Could check you your LabVIEW adapter settings (configure > adapters > double-click LabVIEW)? This screen should appear only if you use the LabVIEW development system, and generally for the operator-run test you want to use the runtime engine instead. This could help with the issue.
Another thing you could try is to set up the camera output window so that it is modal to TestStand. You can find an example of this integrated to TestStand; Basically, there are 'Start a modal dialogue' and 'end of modal dialog"live in the palette of TestStand in LabVIEW. These screws allow you to configure a VI to appear in modal form to TestStand.
I'm leaning towards the parameters of the card being in the likely case, but let me know how to make these steps!
Tags: NI Software
Similar Questions
-
Why the labwindows/cvi Installer runs whenever I try to start labview 7.1, after I installed N!-series? The installation program runs 3 times now and asks me to restart every time. Then I reboot and it happens all over again when I try to start labview 7.1, unless I select Cancel 3 times in a row then labview starts.
Thank you once again. I am running.
-
My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please
This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage
-
Don't want Phoenix I7: Start 10 menu appears not
I recently tried to install Corel X 3 using XP compatibility mode, but it did not work and damaged my menu of the Start button. Everything seems to be OK, but clicking on the Windows icon results in a brief "Hourglass" and no activity. I tried a system restore, but it tells me it couldn't find a file (AV was off), so I can only assume that X 3 deleted something. I tried some of the suggestions catering menu to start with powershell etc but none have brought.
I don't want to re - load Windows, if I can avoid it, but it seems to be running out of options. Any suggestions please?
Thank you!
Hello;
Let me welcome you on the HP forums!
I read your post on your Win10 Start Menu problem and wanted to help.What COULD something work is known as a repair installation. It is less destructive of all functions of Windows recovery and rewrites the files from Windows system, including drivers, leaving your apps, settings and data intact.
To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.htmlGood luck
I'm a volunteer and I do not work for, or represent, HP.
========================================================================
If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information. -
HP pavilion followed bsod to black screen and the start program menu f10 does not work
Hello
Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen where you can choose to go to recovery, configuration and startup menu). The f10 key recovery does not, others do it... What can I do? Im not happy to lose all my documents but if not the end of the world because I have an external drive with the most important things about it. I don't have a recovery cd... I hope someone can help me because I can't find answers on the internet...
I can't find the type of pc but its old I guess from a pavilion of 87... cannot seek in the pc for the exact number.
Thank you!
I bought a new PC...
-
Hi all
I have a VI that works perfectly and I can control, a 2612 Keithley has for measurements of transistor.
The VI run well when I realize it from the computer that has the Labview 2009 (XP OS) platform
Equipment (IE Keithley 2612 A) is related to another computer that is not labview 2009.
I installed the Run-time-engine 2009 (32-bit XP OS) on this computer.
Then, I create an executable of my VI with the option 'build application.
The executable VI starts normally on the computer, but when I run it, I get an error message from the Keithley 2612 (which wasn't the case when I ran the VI directly from the computer haing LabVIEW 2009 installed on it). The error message is 222 (ie the long parameter)
I thought I did something wrong and I create an executable from an original VI of Keithley (IE without modification). I get the same error message.
When I create an executable with the runtime engine 2009 included (because it is possible to do with LB 2009), I am geeting the same error message.
So I need to check step after step, when the message arrives but
Someone knows something about such a question?
Thank you
Hi all
Just for those who might experience a similar problem.
I found the solution after fighting all the possibilities.
The source of the problem was (for some reason) that the country setting of the computer was wrong
and decimals are written with one, instead of a point.
As I correctly reset the country setting, stand-alone files work normally.
Best regards
Youki
-
F4U52EA: Start flag Menu does not work
My laptop to stop one day and found out it was the connection cable. So I bought a new. But now I try to turn on the laptop and get the message YOUR START MENU is NOT WORKING.
I borrow more than two times and still get the message.
What I could do to try to fix it, pls?
Thank you
Hello
Try the following.
Click with the right button on the Start Menu and select (Admin) command prompt and click 'Yes' to the uac prompt.
In the command prompt window, type powershell and press to enter.
Copy the following text and paste it into the command prompt, and then press ENTER.
Get-AppXPackage - AllUsers | Foreach {add-AppxPackage-DisableDevelopmentMode-register "$($_.) {"InstallLocation) \AppXManifest.xml"}
When it finished, type exit, press ENTER, and then type exit and press enter once more.
Reboot the laptop.
Kind regards
DP - K
-
Start options menu appear in the taskbar - how to display the Menu start properly again?
One of my students has somehow managed to get all its options of Start Menu in the taskbar. The Start Menu does not pop up as it should. I tried to fix the problem using all conventional means relating to the Start Menu and taskbar in properties, but none of these options cover this problem. Please someone can suggest how she got the screen in this State - and how we can go back to how it should be?
Thank you.Hi Questril,
You can try using fix tool available on the microsoft site: http://support.microsoft.com/kb/886549
I hope this helps...
-
Automatically add themselves Start Programs Menu
Everytime I open a program, it appears in the start menu "below" of the line. Even if I went to the start menu, click Customize and set the number of programs on the start menu to 5 (programs 'above' the line), the other programs that are already listed nit are themselves list automatically.
Is there a setting to chan ge rather than right click on each one and "manually" off the list each time? Report as abuse
Hello Tiger78,
· This is what happens with all programs?
· The documents also get the list when you open the same?
Restore the settings in the menu by default start and check the results. Follow the steps for the same thing:
a. right click on Start menu
b. click Properties
c. click Customize
d. click the use default settings tab
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have windows xp to install on the pc, but the program windows vista here is a trial version and it is out of time. I can't even start to show even a menu. I try Ctrl-alt-del and it does nothing. Please help me I don't know what to do. I want to install windows xp on here and get rid of this vista trial.
If you already have the Windows XP disc:
- Insert the Windows XP disk into the CD/DVD drive
- Completely turn off the power - the power supply light should be off, without blinking.
- Turn on the computer and be careful. When it says «Press any key to boot from CD...» "Press a key on your keyboard, the Windows XP Setup program is now charging.
-
My Start menu disappeared. How to restore my computer via the command menu?
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do the restore of the system in Safe Mode, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Change of target document start location Menu
I want to change the target in the start menu of the document which is targeted for my HTML and recently used documents on another drive that I save all my document and do work as a default setting.
To change the location of the Documents folder:
1. click on the Start button.
2 right click on Documents .
3. click on Properties .
4. click on the location .
5. click move .
6. navigate to the new location, and then click Select folder . Boulder computer Maven
Most Microsoft Valuable Professional -
Hello I have a huge problem and need HELP! With all the shortcuts I have on my desktop and icons that I have in my menu it start seem to be a problem. It allows me to open any programs unless I choose a program to start with. Now, I open ALL my programs with the "Open with" menu and its really a lot of time. Also I am not able to start all of the office programs, that it says I need set associations but I checked control panel and I couldn't find that. I tried the FIXIT Windows program on other issues ive had in the past and I was wondering if maybe theres a fix for the problem im having. IM currently on vista Home premium. and I really hope theres someone out there who can help me! Thank you for your time...
Hello
Try the system restore before it happened.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Its control panel - backup and restore center - left upper repair WindowsSO which opens also to use the below to execute.
Start - type in the search box-> rstrui.exe CONTROL the top - top - right click RUN AS ADMIN
or use start - computer or Windows Explorer to navigate to
C:\Windows\System32\rstrui.exe
=====================================
To run a particular program until get them you all back to the normal fair use start - search and type in the
program name or the name of the executable file - OR use start - computer or Windows Explorer to access to the
program, and run it from there.Define your main program associations, and then you can edit any type of file to the correct program.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlHow to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.htmlHow Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows 7 turns with start open Menu then automatically starts programs
Not very tech savvy, so I don't know if this has something to do with a virus.
Yesterday, I noticed that Firefox kept reporting '' high unusual activity. '' I removed all the possible extensions that may be the cause. To be sure, I did a with Windows Defender and Kaspersky virus scan and no viruses were found. My computer up to date with this malicious software removal tool, but it would not be updated from Windows Explorer 11.
This morning, at the opening of my computer, I noticed that the Start Menu was suddenly. Then it started to open programs automatically. When I opened Firefox, once again he says '' high unusual activity. ''
Would appreciate any help step by step.
We understand. You can remove applications on the boot parameters. Click on this link to help you solve this problem.
Keep us in the loop for updates.
Thank you.
-
Add file user POP start menus Menu
When Windows 7 was installed on my computer I had my user folder on the right side of the start menu and when I flew over it I'd get a pop out menu I could then hover over any other file that I want and so on. My motherboard had to be replaced, and now I can't pop out menu for my user folder. I actually click on it and go through all the windows go where I want to go. Does anyone know if there is a way to recover those pop menus? It was much easier to glide my way over what I had to open!
Start button right click and click Properties,
On the top of the page, click on customize,
Scroll personal folders and check the display menu,
Apply and OK.
Maybe you are looking for
-
How do I enter spellchecking, please?
Other users tallk on spell checking of emails as they are being made. I can't find this facility.
-
Verizon email... can't answer the null status said e-mails: 404
Since Firefox, update 31, I can't respond to incoming emails. When I try to send an email or respond to that I get this message: unable to State Null charge: 404. I use the webmail to Verizon and they say it's a Firefox problem. With the help of Mac
-
Portege A600-133 - Slim Port Replicator III does not entirely
Hello... I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual. The unit, however, does well with my laptop (a Portege A600-133). Speci
-
Windows Search 4.0 is not installed
I have an XP SP3 machine. I added the machine to a network, but since then, Windows Search does not work. The search indexer continues running & report errors. I tried to remove find and reinstall, but the reinstallation fails. Would really like to u
-
At the opening of my slide show program he says there is not enough space on I: but I: is an external hard drive. Why is it not open c: I have used before with no problems. Is there a way to force it to open it on my computers built in the hard drive