Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

Similar Questions

• I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair

  I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair and also tried to uninstall and reinstall and the problem persists.  Any help?

  Hello

  Bridge closing

  Go to this site C:\Users\schawla\AppData\Roaming\Adobe\Bridge (Version) \Cache
  Shift + delete all folders inside this folder cache.

  Reopen the bridge and use

  Concerning

  Jitendra

• Pavilion dv6 - 3227cl laptop entertainment puts but has only a black screen

  HP Pavilion DV6 - 3227cl Entertainment Notebook, which is about 2 years old and works on Windows 7 Home Premium, AMD Vision Premium, will to power, but not start.  The fan works and the "caps lock" flashes once approximately every 4 seconds, but all I get is a black screen with no error message or the cursor.  There are no beeps.  The power led lights (white) for about a second, then turns to a dim orange when the battery is installed, but remains white when the battery is removed.  However, the two lights (I'm not sure what they are for) next to the nearest port USB power light lights up as follows: one on the left (as you are looking at the right side of the laptop) is white; the right one is orange.  Both are fully illuminated, (not vaguely that the power light).  The power light is not as bright as the other indicator white located near the USB port.  The laptop started and seemed to be running once since this problem started, but I was not able to start again.  I'm told the battery is bad (it's my brother in law book), but it is possible that the problem is with the power source rather than the processor or motherboard?  I appreciate your comments/advice about this.  Thank you.

  Hi fejevitzky,

  Your question, "according to that, I think you're telling me you don't think it's the BIOS - is that correct?" Yes, as long as you don't see any "white" light reveals LCD bezel back while with the State of the white screen. Bezel LCD's coverage around LCD, most design put modeule LED in the lower corner next to the LCD. While the backlight is not during the boot sequence, which means system doesn't have chance to get BIOS current enforcement program. It also means, he stuck to the condition of the equipment to set up. Normally this motherboard related.

  Quickly, I checked hp.com and found a link that may help. Or 1-800-HP-invent (1-800-474-6836) can save time. This forum only intends to answer fast/just the users questions. On another charge of repair and maintenance, I have to give you other links to achieve.

  HP Partner and Store Locator: (I try to search for your city, but it does not work well.) Suggest that call you for a quick response)

  http://WWW8.HP.com/us/en/store-finder/index.do

  Contact information:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Contact HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP SmartFirend Services: (I saw with the price of the service)

  https://h30617.www3.HP.com/HP/home/index.asp?JumpID=in_r11682_us/en/HHO/PPS/suppgateway_gi_ob_ds_pd/smartfriend_cc/DT

  Thank you very much. If you think that my answer helps your product, please help to close this case once you feel comfortable. Then, click on "CONGRATULATIONS."

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• P400 only black screen will not start.

  My Lenovo was plugged to an outlet controlled by a switch which, during the night, someone off my battery to die.

  So the next morning I turned on after letting it load and only the keyboard illuminated by a screen empty.

  The fan on for a brief moment and stopped.

  The only answer I get from the laptop is a beep when I unplug or plug in the AC adapter.

  I removed the battery, which held the power, trendy french adapter started and got the same result. Even after connecting the battery back in.

  I also tried to connect another monitor, but the result is the same and the monitor only records that the computer is turned on.

  How can I get my computer on without having to send to a lenovo repair center?

  I discovered the motherboard was broken. Thanks for help.

• Satellite C660D - 17 H - black screen will not start

  You just bought at the course yesterday but then seller does not think this laptop is absence of motherboard.
  I press the power button and the fan runs for 2 seconds then powers off.
  I remove the battery and the DC cable. Then I press the power button for 20 seconds, but nothing.
  Any ideas greatly appreciated.

  (I think the bios is weong. I really don't know the reset this cmos.)

  * @ surveshoeb *.
  In case you have the same problem, your motherboard is faulty and there is only one solution:
  the defective part (in this case mother) needs to be replaced

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• Unable to start my laptop Toshiba

  Basically, later yesterday my computer froze so I decided to plant it. I turned the computer back on but I can't actually back into the computer that I start, then a black page appears telling me that the computer could not initialize correctly.

  I am presented with several options. I can't get into Safe Mode or start Windows normally.
  However, Safe Mode does not work, I have a page with errors in all directions.

  When I try to start Windows normally Windows XP logo appears and everything seems normal, until a blue screen appears quickly and then goes almost immediately, then Im back to the original page that explains that the computer failed to boot normally.

  I need serious help. I'm only 17, and not a computer expert!

  Why you n t take a Toshiba recovery disc and reinstall the OS again?
  But the recovery procedure would format the whole HARD drive and you will lose the files stored on the HARD drive.

  But according to your message did not help to boot into windows XP
  To my eyes there so no other solution as a new OS install

• How can I start/re-start Windows professional XP in safe MODE

  How can I start/re-start Windows professional XP in safe MODE? Aid filw I get only instructed on XP Home Edition and the buttons and it tells you to follow the guests do not appear in the professional edition. I need the instructions for Pro.  Can someone help me with this?

  Original title: Safe Mode

  You can start either home or Pro in SafeMode by this technique...

  Keep F8 hitting twice a second immediately after you have switched on the PC. You should get a boot menu where safe mode is selectable using the up/down arrow keys.

  Or, use the msconfig utility. When you do it this way, Windows starts in SafeMode permanently until you reverse the changes in msconfig...

  • Click Start
  • Click on run
  • Type msconfig and press enter
  • Click on the CHEST. INI tab
  • Check the box for/SafeBoot
  • Click OK
  • Restart the PC when prompted

  Tricky

• Start of diagnosis while in safe mode

  I checked before diagnosis start unchecking to boot into safe mode and now my system won't boot.  I am running XP Pro on a Dell GX620. Any advice?

  I see...  See how he wants to cheat you?   Maybe you can outsmart it...

  Here's what I'd do:

  Create a bootable CD of XP Recovery Console and start on this (instructions below).

  Enter these commands:

  CD-(back up/back to the root directory of drive C)
  attrib - shr boot.ini (remove the system, hidden, and only the read attributes)
  Boot.ini.bak ren boot.ini (rename the boot.ini afflicted)

  Remove the CD and restart your drive HARD and XP will complain about the missing boot.ini, but have yet to start.

  In Explorer, navigate to your C:\ folder and rename the file boot.ini.bak boot.ini (this is so msconfig will be able to find it).

  Run the msconfig and remove the afflictions like / SafeBoot and save changes, etc.  (you don't have to restart if you do not want).

  If you wish, you can change the boot.ini to hand, but not everyone is comfortable to do this.

  I don't know if you're free of virus/malware or not but who has bet that you started at least once.

  If your EXE files will not start, see if it will help:

  Looks like your Windows file associations have to dispose. This means that XP is not
  know what to do with the files by looking at the file extension (for example, .exe for executables,
  .doc for MS documents, etc.).

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  How to create a bootable CD from the Console of the Recovery XP (no XP media required):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• I can't get my laptop out of safe mode and Internet explorer__

  I can't get my laptop out of safe mode and in internet explore

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Above link has info to enter SM

  Table of contents > Vista

  Alterations of ther reading I've included for you out of SM

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• I've updated to Firefox 36 automatically, however, it does not start. I tried firefox safe mode, reinstall, uninstall avg antivirus, eks.

  The computer restarts during the night to install updates. Everything was fine, but now Firefox, which has been updated to version 36, will not launch. Basically, I double click on it, I get a little access to the disk and nothing. I tried to start firefox safe mode. Same thing is happening. I uninstalled by deleting any Mozilla Firefox files, programs and relocation. Still will not start. I uninstalled the old version of AVG. Still will not start. I have Microsoft Security Essentials running and have updated. Still will not start. I need new ideas.

  I just want to confirm a step that you took. When you say you deleted the program files Firefox content, this may have taken all the Firefox of the components off of your computer.

  The steps that you must follow to remove a potentially corrupted installation of firefox are:

  Open your Start menu, select "program files." In program files, select "Programs and features", this should open your window "uninstall or change a program". In this window, locate your program "Mozilla Firefox". Select the program with a left click then "Uninstall", which will appear once the program is highlighted.

  This process will remove the registry changes that can ask questions. After you completely uninstall firefox from your programs, perform a new installation of the latest version of the browser.

  If you have already completed this process without success, so there may be other problems with your windows updates, it's not uncommon. If you have problems after a new installation of Firefox, after following the instructions above, please check if your browser "Internet Explorer" is to have the same questions, if yes, then you may have problems more serious that will require new measures.

• cannot re start my system by getting only a black screen with recovery of window failure

  original title: do not re start

  I have a dell inspiron laptop and tried to install windows7 vista upgrade, since, so I can not re boot my system by getting only a black screen with insufficient recovery window, I followed the instructions on the screen to re-boot without success, and when I insert the disc of the operating system for re install nothing happens, Pls help TKS.
  Myrna

  Hi myrnaspiers,

   

  1. What is the exact error you get when you try to start windows.

  2. what type of installation you have done, it's a custom Setup or an upgrade.

  3. check if you have the option to go back to the old version of windows.

  I suggest you follow the link to black screen when I start Windows 7 below.

   

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

  I also suggest you start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.