start the computer as an administrator, should close the session and start that me. This happens to be annoying. Any ideas?

Similar Questions

• I have the two Master Sync activated WITHOUT be asked for master password said at the start of the session and password?

  The basic question is that whenever I start Firefox, I am invited, a few seconds later, my master password, regardless of if I will actually connect a site for which I saved my credentials.
  This same number as well as a replica of his original poster chosen as the best answer has been published on the following link: https://support.mozilla.org/en-US/questions/1039575

  I'm in the same situation as this poster, but I don't want to turn off sync. I need the master password set to protect my passwords stored, and I need the Sync feature enabled to share my profile between different computers that I use.
  If I close the master password prompt at the start of the session and then I go to a page that I recorded the password, I should I get prompted again, and that's all I need. Also, I've installed Sync do NOT share my passwords stored, where the master password invite so that the effect is useless in my case.

  So the question is simply how can I turn off the prompt for password at startup, have it pop up when you access a site that needs a password stored (or ask if I want to save a) and keep the clock running without sharing passwords.

  Thanks in advance.

  No, this is not possible.
  Sync must retrieve the journal of authentication data in password manager and which requires to enter the password to unlock the password.

  The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.
  The chrome://FirefoxAccounts entry in the Password Manager stores (kA and kB) credentials in JSON format.
  Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this file and must the Manager password for the credentials of the synchronization.

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is

  Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!

  [Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]

  The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service

  Concerning

  Stéphane

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• When I try to use the parental controls, I tells me that this page could not load any ideas

  When I try to use the parental controls, I tells me that this page could not load any ideas

  Hello

  Since when are you facing this problem?

  If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Oppen browser and minimize fine, but Web pages are not. How to open up to the size of the browser and stay that way with the zoom all the time

  I can't get a Web page to stay in the browser with the zoom size whenever I go to a web page. With the zoom it just stay little white on both sides. How to get there the size of the browser, and stay that way have no problem with my internet explore do this on my new computer. or fire fox on my old computer.

  You can use an extension to set a page zoom and the size of the default font on web pages:

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

• in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  in the folder windows images, photo icons are the same and are not actually see a little image of the image. How to make this happen

  Hi tonutot,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. only happens in the pictures folder?

  Check and make sure that the bottom of settings is set correctly on the computer.

  (a) in the currently open folder, click organize on the toolbar, and then click folder and Search Options.

  (b) click on the view tab, and then deselect the always show icons, never thumbnails check box.

  (c) click on apply and OK

  Behavior and change folder views

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is a user of the NETWORK and how to disable this user by CMD?

  What is a user of the NETWORK and how to disable this user by CMD?

  I found a user named ASPNET on my computer. For security reasons, I need to disable this user.

  There are hundreds of computers in my company.

  How can I deactivate this user? By CMD or domain controller?

  In addition, if I disable the ASPNET user, what affects you on Windows & and Windows XP?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• account has expired, I don't have a month using the program and its seems outdated, what happens?

  account has expired, I don't have a month using the program and its seems outdated, what happens?

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

  or

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Hello! I am a fashion design student and my school offer us a wide range of Adobe programs. I asked the Redemption Code and I have but when I try to enter it know this code is already in use however the Photoshop and Illustrator that I already

  Hello! I am a fashion design student and my school offer us a wide range of Adobe programs. I asked the Redemption Code and I, but when I try to enter on behalf of the school know that this code has already been used however the Photoshop and Illustrator that I already have on my Mac do not work. Before you begin the school pack, I used a free version and so now I see that my free version is over but I can't use the pack of the school that gave me. How can I start using it?

  Hello

  Please see redemption code help

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  Hi Gilad,

  It seems more an audio problem for me.

  Please select all the clips on the timeline, right-click and select 'Remove' to separate the audio from the videos.

  Once done select Audio only in the timeline and right click to select "Render and replace. Once done, save and close the project.

  Try reading to check if it works.

  You can also try to export an XML file i.e tab of project selection.

  Go to file > export > Final Cut Pro XML

  After creating a new project > import the XML file, and then open the sequence to check.

  Vinay