Start the computer upgrade to Windows 10 without my permission

Similar Questions

• How can I stop my Windows 7 Professional to be forced to upgrade to Windows 10 without my permission?

  Original title: forced Windows 10 update

  How can I stop my Windows 7 Professional to be forced to upgrade to Windows 10 without my permission?

  Hi Ronebo,

  Sorry for the inconvenience caused.

  If your system is upgraded to Windows 10 automatically then it might be a chance that the updates of windows have been set to automatic. If you have a problem with Windows 10 we are here to help and help you address them. You can see the article mentioned below to learn more about Windows 10 and fix common problems.

  Get Started with Windows 10

  Need help with Windows 10?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Screen BACK up when you start the computer by using Windows XP

  I did a reinstall of my OS to Windows XP.  Now, every time I turn on the computer, or restart, I get the following message appears on a black screen (BACK):

  (I use the quotes to the messages from the computer).

  "Choose the operating system to start".

  "Microsoft Windows XP Home Edition" (this option is highlighted)

  "Microsoft Windows XP Home Edition" (repeated).

  "Use the top and down arrow keys to move the selection of your choice."

  "Press ENTER to choose."

  "Seconds until highlighted choice will begin automatically."  (There's a digital countdown to 25 to zero... and the computer continues normally)

  "For advanced troubleshooting startup options and for Windows, press F8."

  If I press the key "enter", with the first option highlighted, the computer will resume as usual.  But I've never met this before start screen.

  How can I get the computer to restart normally without stopping on this screen?

  Thank you very much for your help!

  Hello

  You format the drive that had Windows XP and reinstall Windows XP on it?

  The following articles may be useful:
  To specify the default operating system for startup
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_startrecover_default_os.mspx?mfr=true

  How to edit the Boot.ini file in Windows XP
  http://support.Microsoft.com/kb/289022

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How can I get rid of a 'sidebar' (an additional site without on the left of the screen) that is still there after restarting Firefox and even cold, start the computer?

  I opened a Web site of the library without specifying "in a new tab. I expected to crush the existing active tab. Instead, he opened in a demi-fenetre on the left, without tab and without all the icons "Min/Max/Close. I can not close it even by restarting Firefox or stop and start the computer. He now appears on each screen in Firefox with each tab. I note the address of the site to be replaced, but the offending site is https://servicing.capitalone.com/c1/login.aspx.

  There is an 'X' in the top right of the sidebar.
  You can replace it with a different sidebar; Therefore, you can use "Ctrl + B" to bring up the sidebar bookmarks, use "Ctrl + B" once more to turn it took off.

  Click on the star to bookmark to bring up the bookmark, in the lower left corner, if you see the following, uncheck the box.

  [X] load this bookmark in the sidebar.

  You can right click a bookmark to display the bookmark properties, uncheck the "load this bookmark in the sidebar".

  In the sidebar

  1. Right-click to bring up the Page Info
  2. Triple - click the url
  3. use "Ctrl + B" to bring up the Bookmarks Sidebar
  4. Paste the url in search, then right click on the found object to bring up the bookmark properties

  In the list of Favorites library there is unfortunately no column in the list of library of favorites for this feature, but you can click on the bookmark and properties will be displayed on the box under the same information, if you see a drop-down list "gone" click to view the list of properties.

  If you want to see the extent that you have these bookmarks you export our bookmarks in bookmarks.html file and then view the source and use of find for WEB_PANEL = "true" - I have the extension 'Search all', so I can see how many times the string occurs and where.

  It has a turbulent history, it is useful as a reference column, but it was destroyed in Firefox 3, after use in a link, use, restoration of use later but not keyworded bookmarks and not places links both where it makes sense to break. Remained at does not not for keywords because they wanted to destroy the mot-cle--Word key lost for a year in the beta version of Firefox 3. Now, it must be eliminated because few people (can) use it (properly), but they will make this inaccessible box first - someone ' else see the additional error with that.

• Windows could not update the Configuration to start the computer. Windows Server 2012

  I am trying to install Windows Server 2012. When installing, I get the message could not Windows Update to the Configuration to start the computer. Installation cannot continue. He cancel the installation. Can someone help me with my problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

  How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

  PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

  Thanks in advance for the answers to my question!

  Hello Fred!

  • First create a new folder by right click on an open space on your desktop
  • hover the mouse over the new, & click on new folder
  • right-click on the new folder and choose Rename
  • write your selected folder name
    
  1. Connect your data cable USB & POWER to the camera or insert the memory card
  2. Open the files and Select the files you want to save
  3. Select files butten now the mouse left click and move the mouse over the files
  4. then right click on the selected files and click copy
  5. go to the folder you named and open
  6. right-click and select Paste & that's it!

  I hope this works!
  Do not hesitate to ask, I don't mind!

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cannot start the computer without disconnecting the graphics card

  I'm having a strange problem.

  Recently my computer has started doing something funny.  If I choose restart, or stop and start the computer too fast, it does not start.  He posts about 3 times then won't start.  If I unplug the graphic card and let the beep from the motherboard error on the code, and then close it, plug it back and it starts.  It's really weird and I don't know where to start troubleshooting.

  Here are my system specs:

  OS: Vista 64

  Processor: Intel Core 2 Quad Q6600 @ 2.40 GHz (4CPU), "2.4 GHz

  Motherboard: Biostar T-Power I45

  Graphics card: NVidia GE Force 9800 GX2

  Any help would be great because I just had to reinstall windows, and there restart every time I install a program, and with this error it takes me about 10 minutes to start again.

  Thank you!

  Hello

  You've got a video that can interfere? Settings/Setup (BIOS/CMOS) often as F2
  you start so watch the screen for the key. Disable the integrated video if activated.

  If it does not help it sounds like you need technical support in a real store of the computer (not leeks and)
  Displays a BestBuy or some other BigBox store) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards