Start the loop to stop

Similar Questions

• PC counters each attempt to fix/repair and finally, the loop to stop/restart windows Explorer.

  So beyond, I'm done with this laptop. He started by run me windows update and the awakening of a BSOD. Now browse those tedious threads, I know that the next thing people want are the dumpfiles. Well, you cannot make them because it won't create dumpfiles. I checked everywhere for them and double-checked to make sure that when I got bsod it is correctly configured to do. It will not create them. So ok, the next thing people say is running scandisk Sfc. Nope, BSOD in the course. Chkdsk? Nope, BSOD. during the. This laptop has a coherent dpc latency problem where every 10-13 seconds it stings really high, distorting the audio. I tried to disable drivers, update drivers, pulling on the battery, and it won't go away. To * with it I say, I can deal with that, besides there is probably a hardware problem, it's an old inspiron 5040. The greatest success in fixing something comes sfc running in safe mode with cmd prompt. He got to 100% and has absolutely nothing more. All this stems from the windows updates failed. But this latest issue is the water drop. Before the windows explore stopped working/restart loop, which prevents me from running damn near all executable on ANY startup mode, I was getting semi-fonctionnalites off safe mode with network. I was inside my damndest to try to solve the problems without paying a penny for the repair (because it's my operating system from windows to the 3rd address I got incredibly frustrated with questions and I'm NOT GOING to sink more money into the purchase/solve this *) but after a month of countless BSOD and failed system restore (BSOD on those too) I decided to say the * with it , it can still be used for browsing with chrome at least, since I found a way to activate the sounds of the internet registry. I had used it for about a month and realized that internet Explorer was causing in fact a kind of conflicts, because all applications requiring an i.e worked incorrectly, display of white windows resources that need to be pulled with knowledge then I tried to reinstall that is and makes the mistake of restarting, forget the automatic Windows Update. Well, I is none of that with this time and tried to turn off the pc before it started with nothing else than a glorified blue screening method. To restart, I got "windows is the restoration of changes", another reboot, then a "Welcome" I get started in the regular office, (not safe mode or anything like that) and he gives me a small white window with "custom settings" on it and literally nothing else. No toolbar, no desktop shortcuts. Wait a few seconds and I get "Windows Explorer has stopped working" and the option to close the window. safemodes boot loop to stop/restart windows Explorer and I can't do anything appear the Task Manager which is pretty useless, because I can't really do anything here except close programs that are not accessible in the first place. Safe mode only I can enter is the one with the command prompt. I don't really know what else to do. Quite happy to take a hammer and break the laptop for parts. There are so many problems with this thing, I doubt that someone will be able to help in any way especially withouth minidumps the BSOD. But if there is something simple that I'm missing for at least the minimum functionality that I was getting out of it until windows update in ruins me, feel free to try to solve the problems. The code the most common bsod I get is 0xf4. I put my money on half of the problem with the hard drive itself and the rest of the question was any other defective hardware. But ill be doomed if I buy another harddrive just to have more questions.

  Hello

  Generally, this problem is caused due to hardware or software related issues. As you mentioned that you have completed the restoration of the system and sets the Explorer loo, I would like to know if the problem is resolved or not.

  Regarding performance related questions, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This Microsoft Help article consists of the steps to optimize Windows to improve performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Method 2:

  Put the computer to boot and check if the problem persists. This troubleshooting will help you find what third-party program or the app is the cause of this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• MacBook pro starts the process but stop before midway lights

  HI -.

  My MacBook Pro starts the boot process but stops and stops before reaching the point to halfway. This can be the result of something that I did yesterday, I disabled my MacBook during a software update. I don't know what has been updated.  (I've left for a few hours and would not leave my computer on while I was out.)

  Is there something at home, I can do to fix this?

  Thank you!

  If you do not know what has been updated, nor do we. Could have been a critical system component. Try to start in Safe Mode and see if that clears up the problem. If this is not the case, start in Recovery Mode, select disk utility and make a disk first aid. If that doesn't work or you can't get into Recovery Mode, then try Internet Recovery Mode, while the Mac is connected to the Internet (press Command + Option + R) so it starts off Apple servers and reinstall OS X. If all goes well, you won't lose too much data.

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• After STARTING the ESXi server stopped all VMware images...

  Hi people!

  The version of server 1 using I could mark images to start automatically with the VMware Server.

  I have not found the place to install VMware images to auto-start with the server - or which is not possible with this product.

  Best regards, Hans Holt

  Is in the configuration under Machine tab virtual start / stop

• How to start the print spooler stopped?

  My system: Microsoft Windows XP Home Edition, XP SP 3

  My printer: Epson Stylus PHOTO R320.

  When I try to set the margins of a page from WordPad is the first message: ' before you can perform tasks related to printer such as layout or print a document, you nee to install a printer. " You want to install a printer now? " I press 'Yes'.

  This produced the message printer is 'operation could not be performed. The print spooler is not running. »

  After days trying various troubleshooting of Microsoft and Epson there is a failure to complete the thread or 'operation could not be performed. The print spooler is not running. »

  What, pray, say, is the fix?

  Click on ' Start'---> "Run"---> type "Services.msc" without the quotes in the Run dialog box and click on 'Ok'. '. Scroll down to the print spooler , made service a right-click and select ' properties'.»» Click the Start button in the "Service status" box, and in the startup type box, select automatic. Good luck.

• XP starts the sequence but stops at a black screen before the end of startup.

  When I start my PC's of tracks through the boot sequence but evaporate hangs on a white, black screen. Then I plant sequence and re-boot into Safe Mode. I tried to restore to a previous point, but have always had the same problem. The company I bought the PC from was wound up some time ago and I don't have a recovery disk. I can only work in safe mode and cannot access the net, emails or anything other than the basics. Any ideas gratefully received.

  Hello

  As you can connect to the computer in safe mode, I suggest you perform a clean boot to verify if a third party startup application or service prevents the computer
  to boot the system.

  Refer to this article for more information about how to perform a clean boot:

  How do advanced clean boot troubleshooting in Windows XP:
  http://support.Microsoft.com/kb/316434

  Also see this article:

  Advanced Troubleshooting for General startup problems in Windows XP:
  http://support.Microsoft.com/kb/308041

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The open end of the loop to stop file

  How can I make the script jump "docRef = open (fileList [i])" at the end of the iteration, once all the files are open? Is there a way to get rid of

  this by getting perhaps the total number of files on a folder and it attributed as a variable "max", so that if the variable 'i' is finally equal to "

  'max', the script will not run the last action on the iteration?

  From now on, this loop (excerpt from Paul Riggott response to my question before in the treatment of folder) generates the following error message:

  8000 error: Cannot open the file because the options are incorrect

  Line: 20

  -> docRef = open (fileList [i]);

  Here is the script I'm working on:

  var startDisplayDialogs = app.displayDialogs

  app.displayDialogs = DialogModes.NO

  ask the user for input and output files

  var inputFolder = Folder.selectDialog ("select a folder to process")

  var outputFolder = Folder.selectDialog ("select a folder for output files")

  If (inputFolder! = null & & outputFolder! = null) {}

  Download all files in this folder

  List of files of the var = inputFolder.getFiles)

  Open each in turn

  for (var i = 0; i < fileList.length; i ++) {}

  The list of files includes both folders and files opened and files

  If (instanceof fileList [i] file & & .hidden fileList [i] == false) {}

  get a reference to the new document

  docRef var = open (fileList [i]);

  }

  }

  The main problem is

  List of files of the var = inputFolder.getFiles ();

  You get a list of all the files and folders that exist in this folder, they are text files, etc.

  It is best to specify the types of files IE:

  List of files of the var = inputFolder.getFiles (/ \.) (jpg) | TIF | PSD |) $/i);

  As this will get a list of files jpg, tif or psd

• Judgment of multiple while loop running at different rates to stop using the single Boolean stop button

  Hello

  I'm on the block diagram of 4 loops, do different tasks. They are independent of each other, but need to see the unique front panel - some of the wonders of labview!

  Now, I want to have a unique stop button which will in fact be a back button to return to the main screen by stopping all four loops on the block diagram. I used the stop button (switch released) with local variable to stop the three other loops. He stops the vi but it is not a good stop vi to stop properly and the grid on the performance of the front panel. Now all loops run also at different rates, so it is not necessary that all loops are stopped immediately when one of the loop is stopped. Can't really think of a better way. All the ideas!

  Kind regards

  Austin

  Variables local is ok in this case, but you will need to keep the control in switching mode (no lock).

  A better solution would be to have all the loops as a structure of event all listening value stop change. Or have the Stop value change event generate a user defined output event or similar.

  /Y

• My email is unable compact my mails, it starts the process and then stops.

  My email is unable compact my mails, it starts the process and stops, any help

  Try to manually compact with my Windows Mail utility (www.oehelp.com/WMUtil/) and see if it works.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

  Steve

• Samples buffered not updated in the loop For

  Hello.

  I'm having some trouble with DAQmx Read.

  I have 2 cards USB 6509 making a digital output to solve some multiplexers and I want to measure differential voltage

  using 2 boards of 6255 USB. I have a sample clock shared for 6255 boards through a PFI line. Unfortunately

  6509 boards do not allow for the synchronization of hardware I can say.

  So, to synchronize the functions I used a flat sequence to ensure that multiplexers are processed before acquiring the data of voltage

  and as you can see on the VI (LabVIEW 8.6) I use a loop to run 16 iterations and build a table with these data.

  The problem is that sometimes I get is error 200287 or 200010. And when I don't get an error, the data of 16 iterations

  is the same and it is incorrect because I'm monotoring the data to enter into the 6255 boards using a multimeter and data do not match.

  I seems to me that the analog input is read-only data iteration and I can't understand why.

  Also this VI takes a long time to run and it freezes for a few seconds on a few iterations.

  Can someone take a look at the VI and enlighten us please?

  I'm really stuck on this part.

  Thanks in advance.

  See you soon.

  Rui

  Rui,

  Well-that the code has sufficient space to improve performance!  Other than samples obvious to read the error that was made out, I recommend:

  • Read the excellent post from Sean earlier today!
  • Use "master of task.vi" to commit the task before starting the loop - as you have tasks enter the loop 'unverified' and so for each iteration tasks are verified, reserved, committed, started, stopped, no committed, without reserve and unverified. That's a lot of unnecessary work behind the scenes!
  • Do not pass 30000 as a sample to the slave task rate HAVE read the actual sampling frequency of the main task of a task property node and pass a LARGE value this actual sampling frequency to the task of the slave (sample rate can get under duress and you cause a bit of a problem)
  • Bring your constants out of the loop, that the 8.6 compiler doesn't have some of the modern optomizations available for reading constant each iteration is frowned on
  • Check your version of DAQmx.  You want more 9.1 to avoid the bug of the autostart.

• conditional of the loop will not control read in a business event

  I made a simple conditional to the loop, with a timer and a generator of random numbers in the loop as a stop button attached to the conditional stop Terminal.  Everything works well and stop the loop when I click on the stop button. But I then wrap the conditional for the loop with a structure event and create an event to run the conditional for the loop.

  To my surprise, when I run this updated VI I can never get the loop to stop via the wired button until the conditional terminal stop.  How is what happens? And how to do this?

  change the case of the event > UNCHECK block façade up to the case of finishes (or whatever this text indicates actually in the lower left corner of the pop - up of the event edit)

  (~ ~ ~ oh-Magic 8-ball ~ ~ ~)

• I'm trying to install Adobe Creative cloud, but when he starts initialization. He stops and closes unexpectedly.

  I'm trying to install Adobe Creative cloud, but when it starts the initialization, it stops just and close unexpectedly, without saying anything.

  I have a Windows 10.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Stop and start the task in while loop

  I try to start and stop an output meter (creates pulsed output) in a while loop and I don't know how this is possible. I have a while loop running who is taking measures from a digital compass. If my title is within acceptable limits, the outputs of the meter (2 of them to turn to the left and right) must be turned off. If the title is out of the acceptable range, let say too far to the right, I want to start one of my outings of the counter to activate the object to the left. The issue I am having is that if I put the block 'Start the task' in the while loop the system will try to start each iteration of the loop, even if it is already on. I don't know if there is a problem, but it does not appear effective from a programming perspective. I remember reading somewhere that stop and start tasks can really slow a loop. Any suggestions?

  I actually just to understand it. If you use some if statements and the "fact of task is" block you can make it work.

• While the loop stops before the countdown ended

  Hello everyone

  I have a problem with this scenario:

  

  What I want is that I can enter a series of tables and then he will choose the first line being the first cycle of number is 0, the second 1 and so on. I want this loop to continue until I left my empty tables. The problem is when I test, it stops immediately, but when I select all seems to work fine.

  This is a program I am writing so he can control some pumps - I put in a number and weight, and then it converts it to a % of setpoint that will trigger the pump. When the countdown is finished then it should start the dosage with the following weight and time.

  I'm relatively new to labVIEW. I tried to look around, but I have not found who could help me, I'm counting on you!

  Thank you very much

  Theis