Start the software mac 10 with bootcamp Windows

Similar Questions

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Original Titus: cannot install software blackberry "BOLD"

  When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

  Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

  End of quote

  What data means this error report contain?

  Why should I report to Microsoft?

  I received error below during the repair software blackberry

  Quote: The path:

  ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

  End of quote

  No path

  Hi ZiaHL,

  Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

  "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

  You can also view the article mentioned below for more information:

   

  BlackBerry Desktop Software issues fixed in this release

  http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

  Let us know if that helps.

• do not install the software for PSC 2355 using windows 7

  Recently upgraded my system from windows XP to windows 7. The CD with the software indicates compatibility with Windows 98, Me, 2000 & XP. I tried to use it to install the software but received a message saying that it was not compatible.  Need help, is there a way to bypass the message version and install or adownload available for me to use the HP University?

  Hello Milliebee,

  Welcome to the Forums of HP Support! I see that you have recently upgraded your computer from Windows XP to Windows 7 and you want compatible software and download drivers for your HP PSC 2355 with the HP Director program.

  Now, because you're using a newer operating system with an old printer you install software and drivers by using the OS print driver, which means that there is no download available, but the driver was built into the operating system.

  To better understand, please have a look here: installation of the printer software in Windows 7 for a USB cable connection, regarding the HP Director, it is no longer available. You may be able to get some third party options that can be comparable.

  I hope this helps!

  Thank you

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• There is workaround to get the playback mode by default when I start the software adobe reader DC?

  There is workaround to get the playback mode by default when I start the software adobe reader DC?

  Hi Keeperparma,

  There is no option in Acrobat reader to customize playback mode when you start the player, but you can configure for a specific file by using the "view original" feature of acrobat, but which apply only to this specific pdf.

  Kind regards

  Rahul

• dialog box "Choose the program you want to open this file" is displayed when I start (after shutdown or restart) with my windows username listed in the file to open

  As I mentioned, the dialog box appears after every restart.  It occurs after I entered my credentials to logon and proceeded to windows.  It seems to be pretty late in the boot process that things like the chat programs and widgets are fully charged at the time wherever the dialog box is displayed.

  The dialog box appears to be the 'Open with' dialog box in Windows 7 standard.

  Specifically the dialogue reads as follows:

  Choose the program you want to open this file:
   
  File: Mathew [it's my user id and he showed not extension)

  If I open the file into something like Notepad, then the information below is presented (the # s are real numbers, but these looked like mac addresses, so I left)

  ===========================================================================
  List of the interface
  ##...## ## ## ## ## ## ...... Dell Wireless 1510 Wireless-N WLAN Mini Card
  ##...## ## ## ## ## ## ...... NVIDIA nForce Networking Controller
  #........................... Software Loopback Interface 1
  #... # # # # # # # # Card Microsoft ISATAP
  #... # # # # # # # # Teredo Tunneling Pseudo-Interface
  #... # # # # # # # # Card Microsoft ISATAP #2
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  None
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  None
  Persistent routes:
  None

  Startup in MSCONFIG includes:
  ArcoTray - request for assistance Adobe Acrobat Distiller
  Adobe Reader and Acrobat Manager
  AVG Internet Security
  CyberLink PowerDVD
  Dell Support Center updates
  Reference Dell Webcam Central
  Dell Wireless card wireless network tray Applet WLAND
  Google update
  GoogleTalk
  GrooveMonitor Utility
  Digital Imaging HP - hp all-in-one serious
  HpqSRmon Application
  hpwuSchd Application
  IDT Audio of PC
  iTunes
  Java platform
  Logitech SetPoint
  Microsoft Windows operating system
  Microsoft Windows operating system (Yes, it is listed twice)
  NVIDIA Compatible Windows7 Display driver
  Quicket
  QuickTime
  Synaptics Pointing Device Driver
  TranscodingService

  Samhrutha,

  I solved the problem.

  I found that when creating a new user, no longer had the open with dialog box.

  I started the process of resolution of a corrupted user profile (which seems little more than creating a new and copy and paste a few old values), when I decided to try one last thing.

  I logged on my account corrupted again and when the 'Open with' dialog that I open the file with Notepad.  I tried to "save under" to locate the file and found that it was located in C:\Users.  Something in recent weeks seems to have put a file without an extension, called "Mathew" (my log in name) in this folder, and it began when I started windows.

  I have since deleted the file and am no longer get the "Open with" dialog

  Thanks for your support!
  Carpet

• I have the software not compatible with Windows 8. How can I install it?

  You may have upgraded to Windows 8 or bought a new laptop with Windows 8 and can ask you how you would install any software that is made for an earlier version of Windows.  Windows 8 has a similar to Windows 7 for this purpose compatibility mode.

  NOTE: This process may not work, but it's a good starting point.  This will not work for each program/driver out there, but he has the best chance.  For software that is not removed, start with step 3.

  1. download the software/driver.

  2. start the extraction process and take note it is extracted to. cancel Setup after extraction finished.

  3. navigate to this folder of extraction. Right click on the Setup/installer file and select compatibility Troulbeshoot.

  4 follow the prompts in the troubleshooting and select the automatic settings option.

  5. Select the Test program when you are prompted.

  6. follow the installation.

  7. If no errors have been presented, it can work at this stage.

  Hope this information is useful.

• Transfer the Software Photoshop CS6 extended for Windows Edition student from a Windows PC to a Mac

  I bought Photoshop CS6 extended for Windows Edition for my PC online student year last of Curry of PC World. I was told, at the time of purchase, that I would be able to transfer this software from my PC to a Macbook. I've now bought the Macbook and would like to transfer the software on my old Windows PC on my new Macbook. Please could I have assistance for that purpose. thank you!

  You don't mention who told you you can transfer the software, but I suspect it wasn't someone from Adobe.  Versions are platform-specific, so there is little chance of the installation of the version of Windows on a Mac without the use of a Windows emulator any.  Since it is CS6, you have the possibility to request an exchange of platform.  See the following...

  Product change or the language platform
  -----------------------------------

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

• How to start the software installed in preinsatlled Win8 Satellite L850

  Hello

  Sorry if these questions seem trivial, but I am a new user of Windows 8 and Toshiba.

  After the start window and go to the window of Toshiba, I see in the software add or uninstall
  I can see all the software loaded, but on the page its self, I can't see all of the icons to start programs.
  because it is not a menu start like on my old xp laptop.

  How to display all the icons?

  On the description on my laptop is also said that Nero and Toshiba webcam software must be loaded but once again, no mention of it in any case!

  Helps lol sorry once again but I'm an xp user and owner of an old laptop.

  Hello

  Since you are new to Windows 8, you should review some important information from Microsoft. Here's a nice page that gives you a good survey of the new system:
  http://Windows.Microsoft.com/en-us/Windows-8/basics#1TC=T1

  Now, the main and important button is the button (button with the sign of Microsoft) Windows.
  There are some important shortcuts you should know:

  Windows key + c: menu poster charms.
  Windows key + d: active desktop mode.
  Windows key + x: displays a menu of advanced system options, including the Windows Control Panel, invites the Task Manager and the order file Explorer.
  Windows key + Tab: Brings the Task Switcher and switch between windows 8-style apps.
  Windows key + q: displays the search applications menu that allows you to search for your list of installed programs.
  Windows key + e: open Explorer files hard disk view that shows all your drives.
  Windows key + r: opens the menu run, where you can launch programs by typing in their names of executable file.

  Here you will find the full presentation:
  http://Windows.Microsoft.com/en-us/Windows-8/new-keyboard-shortcuts#1TC=T1

• error code 1325 trying to download the software TurboTax State with Vista

  Worked with Turbo tax and have passed a new program for me to download, but get the error message.  There is sufficient capacity on the disc and the download starts process but stop middle and gives the 3125 error code.  Federal software downloaded without problem.  Get a message that there is a problem with Windows Installer.

  Hello

  I want to clarify, if you try to install the program or by downloading the program on the internet.

  Please provide the complete error message you receive.

  You can try the following steps:

  Step 1: Use the Windows Installer Cleanup utility to remove all entries (turbo tax) related to the product that you have trouble to install:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 2: Try to install turbo tax as an administrator do a right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not start the Services "Apple Moble device" in windows (Window 7) from my laptop

  I am unable to start the Services of "Apple Moble device" in windows (using windows 7) to my laptop in order to use iTunes software to work with my iPad.

  Every time when I tried to work with my iPad with the installed iTunes, which prompted because of the Services 'Apple Moble Device"not started, so cannot use the iPad with iTunes. I tried several times to launch the "device Moble Apple' Services manually in the Control Panel, but everytimefailed.

  No matter, I reboot the machine, or remove the iTune and installed it again, it has always failed.

  However, my iPad works fine with other computers, so it should not be the problem of the iPad. What will be the problem with my Windows 7 on my desktop? Will there be other software or services in my laptop had to start or stop me from starting Services "Apple Mobile Device"?

  Hello

  Method 1:  Check that the Apple Mobile Device Service is installed and works using the software component Services MMC snap-in of components:

  (a) on the start menu, click search.

  (b) type services.msc, and then click OK. You will see a list of services.

  (c) view the list alphabetically and make sure "Apple Mobile Device Service" status is "started".

  (d) if the State does not indicate that the service is started, right-click Apple Mobile Device Service and choose Start from the context menu.

  (e) if the service is installed and started, right-click the service and select Restart from the context menu.

  Method 2: If the steps above did not help follow the steps described in the following link and check if that helps.

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1567

• Elitepad: Where can I re - download the software that came with my camera?

  I have an Elitepad 900

  I just did a system restore and noticed that the flash on my camera will not work.

  I realize that I didn't like "Cyberlink YouCam" bundled software provided with my camera more.

  Where can I download these? Is there a place where I can get a disk to restore for my device?

  Thank you

  Didn't, but the software I was looking for was on the Windows store.

• Recently switched from PC to Mac. I have the CD for the CS6 Adobe Creative Suite for Mac and PC. How can I get the serial number of the CD Mac OS with no disk drive?

  Recently, I switched from PC to Mac. On my PC, I got the Adobe Creative Suite Design & Web Premium (academic edition) CS6. I bought the product through my school and have two installation CD, for Windows and Mac.

  I try now to download this product on my new Macbook, but do not have a hard drive. When I check my saved items, it says that I have the Creative Suite CS6, but under the platform, he said "Winner" and serial number is for Windows product. Of course, this won't work for my Mac OS.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive? I guess that the numbers are different because when I put the Windows product number in the install window on my Mac, it does not work.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive?

  You use this procedure to share your serial number CS6 win to Mac CS6.

  Exchange a product Adobe of a different version of the language or platform

  Download the Installer application download Adobe Creative Suite 6