Start-up and installation of Windows 8 USB result in a black screen, followed by a blue screen.

Similar Questions

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• After download and installation of windows 10 upgraded, it windows restore 8 after you restart the computer

  After download and installation of windows 10 upgraded my laptop, the system restarts and shut off when I turned it on again it was restoring my old version of windows ie. Windows 8 and now when I run the wizard upgrade download everywhere again.

  Original title: 10 windows installation

  Hello

  Please contact Microsoft Community.

  I understand that you can not upgrade to Windows 10.

  I will definitely help you with this.

  I suggest you go through the links below:

  I suggest you to reset the Windows Update components. See the section manually reset the Windows Update components in the below article to reset the Windows Update components.

  https://support.Microsoft.com/en-us/KB/971058

  Registry warning: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  You can download and upgrade to Windows 10 by ISO.

  Please see the following article from Microsoft to download Windows ISO 10.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Reference: see the following Wiki article created by Andre Da Costa the How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  Reference: refer to the Wiki article created by Andre Da Costa on how: a list of things to do if the installation of Windows 10 fail.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  See also the link below:

  Refer to the suggestion given by Andre Da Costa replied on 10 April 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/unable-to-upgrade-to-Windows-10-from-Windows-81/1b2ed155-5541-43FD-809a-174fd08aad38

  Upgrade to Windows 10: FAQ

  https://support.Microsoft.com/en-us/help/12435/Windows-10-upgrade-FAQ

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• Windows 8 by Microsoft applications have black screen

  Applications by Microsoft on my Windows 8 PC displays a mainly black screen with only a small part of what should be actually appearing. Among these applications Mail, messaging, people, weather, and the page 'change PC settings".
  Here is an example on the page change PC settings:
  http://www.Flickr.com/photos/90095074@N06/8186798290/in/photostream
  What can I do to fix this?
  Thanks in advance.

  This happens when you turn on the FXAA anti-aliasing feature in your dashboard from NVidia. Stop him and you'll be fine

• Whenever I go through updates and installation of Windows 10, he returned to start

  * Original title: upgrade

  Whenever I go through updates and installing windows 10... He returned at the beginning...

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Bootcamp: Installation of Windows 10 USB cannot find bootcamp partition

  Hello

  I deleted the old partition 10 windows using bootcamp, upgrade of the space itself.

  I ran BootCamp again to set up windows 10 pro, as I had already installed on my end 2012 21.5 "iMac and the wizard successfully install on a USB stick, my Windows 10 ISO and any software downloaded from Apple.

  After restarting, start the configuration of Windows 10 until the selection of the partition.

  I, as the statement says, choose partition, BOOTCAMP and Format. Then I click Next, but the Windows says:

  "I can't create or find a partition...". »

  So I can't install it... What is going on? How can I fix this as never before appeared?

  Thank you

  Disconnect the external storage, perform the following two procedures and then only connect the USB Flash drive containing the installer W10.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• The upgrade of equipment and installation of windows on Equium M40X

  Hi guys,.

  I bought a M40X-189 in 2005, which came with win XP Home Edition on a toshiba CD.

  I don't know if this is common worldwide or for different models; but my installation CD verifies only that it is in the computer on which it was purchased with and then coppies an image disk pre-installed and pre-activated windows XP on the computer. I love what it means I don't have to use the serial key and I am not limited to 3 activations on my serial key.

  The only complaint is that when I needed a CD of windows for fixing the computer (starting in recovery mode), this CD did not work and I had to download a pirated copy of XP home (I only it used once to start in recovery mode, and I never installed windows, so I hope that's ok).

  Anyway, the computer comes with a Hitachi HTS541060G9AT00 hard drive (60 GB, ATA - 6, 5400 RPM, 8 MB cache, 12ms search) and I wanted to upgrate to a 250 GB western digital drive with the same cache, research, interface and rpm.

  I was wondering will the CD still be able to install windows or he thinks that it is not the computer, it came with and therefore not let me install?

  Hello

  If you want to install Windows XP using not the recovery disc, then you will have to enter the serial on the right key.
  If you don t have a serial key on the right then you will not be able to complete the installation of the OS.

  With regard to upgrading the HARD drive:
  I know you can use a 120 GB 2.5 IDE HDD for sure, but I don't very well if the 250 GB would be recognized due to the LBA 24 bit m.

  I recommend you to choose a 120 GB HARD drive

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• AFTER THE DOWNLOAD AND INSTALLATION OF WINDOWS, ILS UPDATES BEGIN TO SET UP, AFTER I READ UPDATES WERE NOT CONFIGURED CORRECTLY. RESTORATION OF THE CHANGES. NOT PUT OFF THE COMPUTER.

  RECENTLY RE INITIALIZED HARD DRIVE.

  You don't say if it goes back to run correctly, or you are caught in a loop.

  Read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem;

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• After Installation of Windows 7, it hangs at the splash screen

  Original title: could not get windows 7 or Home server to install

  There is a computer on which he worked.  Put in a new drive, because I wanted to reuse it as a home server.

  Now, it will not install, tried Windows Home server and Windows 7, they all have two freeze at the same place.

  They both

  1. boot
  2. load files
  3. and then freeze to the windows splash screen.

  All of the suggestions.

  Thank you

  Jeff

  Hello Jeff_Myers,

  Thank you for the question!

  It is disheartening to know that have problems you with Windows 7. As I understand it the computer crashes at start Windows after the Installation of Windows 7.

  Method 1:

  Disconnect or disable any external devices (printers, scanner, USB (universal serial bus) drives, sound card and graphics card etc.) except the mouse and keyboard and then boot\start the computer.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.

  Method 2: Perform the Windows 7 installation disc Startup Repair by using the Windows recovery environment.

  What are the system recovery options in Windows 7?

  Answer to us if you are having problems with Windows 7 or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• 10 windows on Dell Latitude E6420 portable: black screen after installation

  I installed windows 10 pro 64 bit on my computer dell laptop latitude e6420 (he held these windows 7 64 bit) through update online on the recommendation of Microsoft.

  After that installation that it restarts and I got the logo followed dell windows 10 logo and black screen and then on my laptop.

  I plugged my monitor which loaded as soon as I inserted it

  I can work with the computer on my laptop with the monitor, but my laptop screen does not work.

  Windows was working fine I was able to access net and tried to update all the drivers, but he showed me that all drivers are up-to-date.

  I was able to run all my applications smoothly only my computer laptop screen was not working. What are the steps I should follow to make my laptop computer screen work normally back.

  Hi, same problem here. I solved it in "Optimus" enable in the settings screen in the BIOS.