Start-up checks on WES 7

My question is specifically related to Windows Embedded Standard 7.  What checks are run at startup to determine that the operating system has not been corrupted?  For example, if the operating system is stored on a USB stick on a single board computer and some causes of electric disturbances a bit in flash to switch, WES7 would detect this at startup?  It checks the registry to find errors?  Is there any OS files checksums?  There are utilities that could be run at startup?  Thank you.

Hello

Thanks for posting in the Microsoft Community.
However, the question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the TechNet Forums to get help:

Let us know if you need more help and we will be happy to help you.

Tags: Windows

Similar Questions

  • I can't install it last update for itunes on my pc. When I try and download it and it's over, he said, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.

    I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    Right-click on the downloaded installer and use run as administrator.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Since the upgrade to 5.0, my saved passwords do not work anymore - when I re - start, the check box for the saved passwords is unchecked.

    If I check the box 'Save password', when I stop and restart, the check mark disappears and the saved passwords no longer work. I have to check the box again after every start. Passwords are not lost: they simply do not work.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Why is my computer tries a consistency disk constantly on start up check?

    Whenever I start my computer it wants to run a check on a drive for consistency. In order to get further, it seems that I need to plug my external hard drive and put the DVDs only I currently used with this computer to the disk draw. Without attaching this bit the computer just seems to freezes and refuses to go any further.

    What happens when you disconnect all external devices and try to boot up your laptop?
    What model of laptop do you have?
    Do you use pre-installed OS original you got with your laptop?

  • When I start to play Supreme Commander: I get "could not start" Please check meets the minimum specifications. ?

    I have a computor, Dell has a dual-core processor and plenty of space... I down loaded the supreme commander game and when I click on the

    shortcut to start the game, I get the cannot start the msg in my question... I think that everything I have satisfied the requirements... but don't know how to check or

    fix the problem... help...

    Check with the manufacturer of game?
    THQ Commander supreme Support FAQ

    Gold - was the "supreme commander" or "Supreme Commander 2"?

  • ThinkPad R60 could not start beyond "checking the status of the integrated security chip.

    I am unable to load the OS-Windows XP because of the layout I did successfully:

    The system worked more slowly, I went to the troubleshooting of windows... and follow the procedure below:

    "' Help-> Pick a task-> use tools to view your computer information and diagnose problems-> SYSTEM-> Changed CONFIGURATION UTILITY to" START DIAGNOSTICS "and restarted the computer...

    But unfortunately,.

    My system is unable to exceed... "" Checking the status of embedded security chip ' and windows does not load.

    If anyone has the solution pl... answer a few important information lies in...

    Thanks in advance.

    I think that the error message says do not keep your finger on the key during the startup of the whole. Just press it several times in the time the windows logo should normally appear.

  • In said Fixit WUAUSERV won't start so check if enough privileges on a user's computer

    I'm trying to fix the many problems of updates do not install it after you have downloaded for > platform NET and Vista and other tips for running specific Fixit for this I get to the WUAUSERV could not start - check if you have enough privileges message, but it's my personal computer where is that a single administrator - me - now what that?

    Hello

    1 are. what Fixit you referring?

    2. what version of .net Frame work fails to install on the computer?

    3. What is the message exact error pull you when installing .net frame work?

    I suggest you to follow the steps below and check if it helps:

    Method 1: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

    Method 2 :

    Try to put your computer in a clean boot state, and then try to install the updates.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Follow these steps to reset the computer to start as usual:

    (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click continue.

    (b) under the general tab, click the Normal startup option, and then click OK.

    (c) when you are prompted to restart the computer, click restart.

    Method 3: Manually try to install updates from the Microsoft Download Center.

    a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

    b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

    c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

    d. When you are prompted, click open to install the update.

    Method 4:
    The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again.

    You must activate new security that you was disabled programs.
    Disable the antivirus software:
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    For your reference: http://support.Microsoft.com/kb/313222

    Hope this information is useful.

  • "Apple Mobile Device" failed to start. Check that you have sufficient privileges to start services system... then options to retry, cancel or continue without installing the component

    After using this computer for 7 months (purchased new in November) and iTunes worked perfectly well until the day he stopped to view the device option (one that shows which iPhone or I pad... etc connected it) and then you can sync devices. but this disappeared and iTunes could not re - download.

    I contacted Apple support and went through all the options to remove and re - download iTunes... but didn't ' work. Each time, after downloading the bulk of the program - he stops to give the following message is displayed:
    iTunes: cannot start Service "Apple Mobile Device" (apple Mobile Device). Check that you have sufficient privileges to start system services. »
    Help, please

    CSWUK

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.Apple.com/kb/HT1923

  • NSS4100 RAID DOES NOT START, please check that all components are present

    Hi, NSS4100 storage system could start the raid10.

    The message is:

    --

    The RAID boot failure
    Please check that all components are present

    --

    All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data?

    Thank you, Dan

    There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data.

    Here are a few RAID array information:

    (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.)

    (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost)

    (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.)

    (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down)

    (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down)

    (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive)

    (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended.

  • Satellite L550-1CC starts by checking the records of consistency

    Hi all

    I have a Satellite L550-1CC, running Windows 7.
    Recently, the departure until I received the message "one of your disks needs to be checked for consistency", and then it runs a scan, and after 2 0r 3 minutes boots up to windows as usual.
    This happens not all the time, but recently, more often.

    I have a problem with my hard drive?
    Any suggestions?

    Hi shaun1d,

    Have you noticed some unusual noise from the HARD drive?

    I've never had such a problem on Windows 7, but it would be interesting to know if you can find some information about it in the same Windows Viewer.
    Have you looked there already?

  • Smart start checking hard drive fail

    Laptop start-up started showing check smart fail, and I need a new hard drive, where I can buy it.

    I checked the HP store, but found nothing.

    model G56-100SA

    Product LD701EA #ABU

    Series CNF0512STD

    Is it possible to buy a different drive for this laptop if HP daesn can't have a?

    You can buy an external hard drive SATA or SSD to an online retailer or a store that sells them.

    Source reference: maintenance & service guide

    I highly recommend an SSD upgrade for a performance upgrade.

  • Check disk starts when you start Windows 7

    I just had to install a new hard drive and a message to run the disk check.

    But when he got to the verification of the empty space it was running at a pace that would have taken 3 hours.  I couldn't stop her, so I rebooted.

    When the computer starts up again, it shows a message he must run check disk, to stop it press any within 6 seconds.

    Regardless of the keys on which I push it does not stop, it starts to check entire disk.

    How can I stop it?

    Why did you have to install a new hard drive?

    If chkdsk runs automatically reboot there's a reason - Windows has detected the volume is 'dirty' or a chkdsk was scheduled to run by you on the next reboot.

    It could take a very long time the chkdsk to run (several hours) depending on the size of the volume being checked, the amount of data on the volume, the speed of your system and what the chkdsk finds to do.

    Interruption of the process won't keep it from running again the next time that you restart and can make things worse so it's best to wait outside and let it finish naturally.

    When Windows starts, it checks the "dirty bit" on all volumes to see if a chkdsk with error correction should run and when a volume is dirty Windows will automatically run the command chkdsk with error correction.  The only way to disable the on a volume's dirty bit is to let a chkdsk with error correction for do you by running up to the end.

    The dirty bit is adjustable on a volume of an aborted reboot, power failure, abnormal termination, interruption of power supply, using the reset or start button / stop, remove the battery.  One of these events?

    You can query the dirty bit on a volume from the prompt with administrator privileges.

    Click on the round starting and in the box type the following:

    cmd

    Right-click on cmd.exe and select run as Administrator:

    To query the bit of impurity on the C drive, type the following in the command prompt window:

    fsutil dirty query C:

    Example of output should be one or the other of:

    Volume c is dirty
    Volume C is NOT dirty

    You should check each of your volumes or each hard disks (C, D, E, etc.).

    Type "exit" to close the command prompt window and communicate your results.

    The volume is dirty or not?

    Windows can also run a chkdsk on reboot if you have scheduled one that runs so if this is the case, you can remove that by entering the following command from your command prompt window which will remove all planned chkdsk on all vouma:

    chkntfs /d

  • BOOTMGR is missing is a message I get the start. checking the BIOS tells me HDD 1 fast (303).

    BOOTMGR is missing is a message I get the start. Checking the BIOS tells me HDD 1 fast (303).

    Hardiskerror wrote:

    Unfortunately I do not have the recovery discs HP or do it on a USB key. It does not start in Windows (I tried to download a recovery on another computer disc but was not sure if it's a 32 or 64-bit). It will allow me to boot from CD option but freezes when it says "starting windows."

    Anither problem just happened, as I was looking at the parameters of the Bios, the laptop turned off. Now when I try to return to this subject will not be. All that happens is that leads him 3 to forward flash 3 times (power, load and HD Led).

    Best wishes

    Roland.

    If the sticker OEM Windows on the laptop says Windows Home Premium, then it was probably 64-bit. You'll need to do a few things to bring your laptop into a useful state again.

    (1) remove the old hard drive from the laptop. Buy a new one and install it yourself, or have been in a store.

    (2) remove the battery and external power adapter and press the power button for 15-30 seconds. Plug the adapter external powre (leave uninstalled, battery). Now you should see it start BIOS and complain that it cannot find any bootable OS.

    (3) the set of recovery discs HP laptop of HP or purchase a licensed Windows Installation DVD. You can also download a version of Linux and install it on your new drive hard if that is your choice.

    How to order a HP recovery disk.

    Best regards

    ERICO

  • Thunderbird does not start

    Update Windows 10 Pro to the new update. Now Thunderbird will not start. Tried as administrator, still not start. Checked the schedules and it shows that there is Mozilla Thunderbird 2 programs on the system, version 38.2.0 and 38.3.0. I tried to uninstall programs and recharge, but it doesn't let me, saying: "I have to close the program before I can uninstall" I did not open. How can I get rid of each of these programs and restart and reinstall?

    So the Windows Task Manager shows two processes of thunderbird?

  • Don't start looking at the installer

    After clicking on the setup of a pack of Microsoft Office 365, I downloaded, a narrow small window pops up telling me that my Mac will start to check the installation program. However, there is no progress showing in the progress bar, even after more than half an hour. I already checked my security settings, change the settings of "Mac App Store and checked the developers ' to 'the developers' and such, but which did not help either. For some reason, I think that the problem is not related with the installation program itself, but with the computer, but I could be wrong. I really don't know what to do at this point.

    Installation program does not start same checking

    Stop

    Disconnect all external devices

    start in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    Run the Setup program

    When it's finished close again and reattach devices, then start-up and start normally.

    MS is a developer identified, so you shouldn't have to degrade your goalie.

    But if you run a party Mac anti-virus utility or a 3rd that "cleans", "canned" or "cookies" on your mac (or any other claim) you must remove them according to the instructions of developers on their respective Web sites.

Maybe you are looking for

  • Re: Broken of the ESC key

    Hi, I foolishly broke my ESC key during the cleaning process, on my P200-1EE. I have 2 intact white key retainers and high silver esc key. I tried to plant back on myself, but it's too complicated and I did not understand how they fit together.My mot

  • PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

    HP Probook 6550 b I need drivers for Windows 7 Professional 64 bit Dutch/English Base system devicePCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01PCI VEN_1180 & DEV_E230 & SUBSYS_146D103CPCI VEN_1180 & DEV_E230 & CC_088000PCI VEN_1180 & DEV_E230 &

  • How can I check that my windows licenseed or not

    I have several computers in my office with different types of windows (win xp, win vista, win7). How can I check that versions of windows installed on each computer is authentic (licensed) or not

  • Activation of Microsoft Project 2007

    My Microsoft Project 2007 was accidentally activated via Mozilla Firefox instead of Internet Explorer. Project 2007 works very well. But, I can't open my site to school with Microsoft Project files. Any ideas of how I can solve this problem? Thank yo

  • Get the error code 651 when connecting to the home group

    Original title: network query I am trying to connect PC (Win7 Ultimate with all the updates and I have installed Sp1) to a homegroup that my surface pro4 (Win10) opened. I get error 651 and I can not now clear homegroup even by using the Troubleshoot