Start-up/loading time

Similar Questions

• KB2572073, KB2518864, KB2633880, like all the others below, updates of each start, long loading times, success of Microsoft log shows 5 full loads,

  Simply, downloads, 5 times in my case exceeded the meter MS Updates to and somewhere other than my system. Whenever I start the same updates are available. FixIt questions do not address it directly at all, KB2572073, KB2518864, KB2633880 are updates of the problem SP2 and SP3 FIXIT has no ability to cover this because there is not a specific query on exactly that.

  Choose one or two-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=KB2572073+KB2633880+KB2518864&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_xp-windows_update&askingquestion=false

  Tip: See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• Windows does not start: every time I type my password it starts to load, but then it freezes

  Help, please!

  • my windows vista family premium does not pass the login window, every time I type my password it starts to load, but then it freezes
  • I already try to restart my computer, but it of not working, now will work in safe mode
  • WHAT CAN THE PROBLEM PLEASE HELP!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Pavillion DV5 starts to load XP, then restarts in a loop

  I withdrew my Pavillion DV5 - 1251NR to act as office and archive hard drive for a long time when the battery is flat and it has stopped working without charger.

  Startup message side that it worked fine but now it just won't start.

  Takes me to the battery message, tells me there is no serial number (had not noticed before), load safe mode options, but the one I choose after starting to load Windows XP, a blue screen flashes and it restarts. Blue screen says something about the withdrawal of antivirus and running checkdisk software but I have no idea how to do these days. There is no option for a DOS command prompt.

  If I walk it right guard this loop throughout the day.

  System information shows serial, UUID, and Prod config ID n all white or 0. (no idea if it will help, seems odd). I ran the test of start-up that passes on each charge (memory, hd, hd smart system). Do not know what is the test of running, but it keeps restarting itself after he finished so it hits the same glitch probably like at boot.

  Don't know, help please. I dropped the external drive that backed up recently and the wedding photos are here

  Hey edwige,.

  Welcome to the HP Support Forums, I have you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your Pavilion dv5. If it does not start normally and it will not start in safe mode, it is not a lot of things we can do. From what you have posted on the information system showing all 0, it could be a problem with the CMOS or RTC battery, but without being able to load Windows, it will be difficult to say.

  Your best bet is to take it to a technician from the local computer. If he cannot understand the problem they should be able to connect the hard drive to another computer and retrieve the data off of it to record your wedding photos, that is assuming that it is not a problem with the hard drive.

  Thank you

• Slow load time

  Any ideas why the Sansa Fuze + takes a long time to load? 5 hours for a full Charge?

  Slow load time means that the usb port is off a small amount of power. If you are using a desktop pc, use a usb port back as the front are usually of low power. If you use a laptop, then plug the laptop power supply before you start to charge the player. For faster loading, use a usb adapter which is rated at 1 amp output (1 000 my). Most usb adapters only put my well of about 500.

• HP pavilion slimline s5-1114 (win7) Long loading time

  Hi, my s5-1114 recently got extremely load times long(2-5min) when I start a program (games, internet explorer, etc. etc) for the first time, after I turned on the computer. I tried to load the pc in safe mode and the LAG disappeared but I can't seem to find the problem.

  Thanks in advance.

  Hello

  Please try this link might help you solve your problem.

  How to do a clean boot

• 3000 N200 starts the first time, but he will start for the third time!

  Hello

  My old N200 of 2 years has recently decided not to initialize the first time. Usually it starts the third time lucky this changes in the cold outdoors when it may take 7 or 8 will but or does not start later.  I think it started after that I left the machine running on battery power a day forgotten and the next day it took a few goes to start after plugging it load up.

  When it wont start the fan lights just like the Windows screen comes on and after a few seconds, it dies as if I had pressed and held down the power button as you would to turn off if the system was no answer, and he makes the same noise. When it finally starts the fan is silent!

  This one worked!

  Thank you very much

  I don't know that I have never done this? Certainly not intentionally. Well, I seem to have solved the problem by resetting the CMOS as described elsewhere in the forum. Machine boots first time every time now, so he must have had something to do with it. Or I also during the same operation was released and returned to the my 2 GB memory add on and I think that may be related to poor startup performance if it is not inserted correctly.

  What a relief and after being where I bought they had no idea and wanted to send it away etc etc and I pay £11 a month for such a service, I had a lot more less than an hour on this forum

  Thanks for the reply

• I get windows did not start and each time that I reboot I get the same thing.

  * Original title: Windows7

  O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great

  In addition:

  Clear CMOS - 3 ways to clear the CMOS - reset the BIOS

  The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below.  Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).

  Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner.   Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.

  Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7

• Long loading times, XPguest - opensuse 11.1 host

  Ref: workstation 6.5.1

  openSUSE 11.1

  After compiling the modules using the tip of raid3868

  (mv/usr/lib/vmware/modules/binary/usr/lib/vmware/modules/binary_old)

  This is the behavior of VMware

  1. If I load a VM with opensuse 11 (it's just one of the guests I have available) it loads and runs like when I was with opensuse 11 as host. So in my opinion works well

  2. I have that I load a VM with XP, the initial screen of XP is fast and then takes a long time until the final screen comes and XP loads, as if XP is looking for drivers etc.

  After it loads, it works as before (way OK).

  Time of loading for XP using opensuse 11 = 43.5 sec

  Loading time for XP using opensuse 11.1 = 5 min 20 sec.

  What is the best way to open a session to the events I have described? I tried to start mode full screen and the whole system froze and the VM doesn't work anymore, so I had to make a new. I'll try again.

  I'm sure it's a problem with the kernel, and it may also appear in fedora 10 etc. I am interesting to solve because is the only thing now is can't me upgrade to opensuse 11.1

  Happy new year!

  Terry =-

  Post the vmware.log file and the file .vmx since the directory containing your comments.

• improve the load time, or view the progress of the loading iOS app?

  Hello

  I have a 75 file ipa meg that takes about 30 seconds to load. Is it possible to improve the loading time or to show the progress of the load somehow?

  I am compiling with air 3.1

  I build my project with Flash Professional 5.5

  OK, I have an update that can be useful to others. This is probably common sense for many of you already... Here is my solution:

  1 table Push statements are very expensive CPU. Eliminate the 1500 of these shaved eight seconds off my boot time

  2. no device font text is expensive to load. Remove all my text vector and its replacement by bitmaps saved 10 seconds of boot time. This meant a major term in my program, but there are benefits to exercise more than the beginning of time.

  3. Turning off the coast of the compilation and the CFC option saved 5 seconds of loading time. Normally I would have this on so I can get better indicators of code inside Flash Builder. But in the last step, turning off saves a lot of startup time. I discovered this because I have a full and a lite version of my application (lite version had the swc compile option off, was much faster as the full version which had the SWC to compile on). For a few hours a day, I tried to understand why the lite version has been commissioning of 5 seconds faster that the full version even if the lite version had more assets.

  Start-up time full version:

  version 1.3:

  25.6 seconds

  version 1.4:

  2.5 seconds

• I can't open all the Web sites in firefox(version 25), its long loading time, help please

  I can't open all the Web sites in firefox(version 25), its long loading time, help please

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

• Is any application of Benchmarking available in FFOS? Basically, I want to compare the performance as 'time to load application', "Image load time", etc.

  I'm basically performing team. Working in porting gecko 1.2. We did successfully porting. But we believe that it is not as big as gecko 1.1 performance. If we want any tool/app to measure performance.
  (1) application of loading time
  (2) time of image rendering
  (3) audio integrated
  (4) key response time
  (5) browser, loading time
  etc.

  Hello

  Thank you for your interest in Firefox OS. In the application settings click the device information > more information > developer. You will find tools for dev for load time, frames per second, etc.

  Best regards
  Michelle Luna

• When you try to "e-mail link" gmail starts to load, but never ends.

  When I try to send a Gmail link starts to load and then gmail never finishes loading. I leave the gmail loading box up to the blue line, about 80% full, and then it just stops. It does this on 2 pc and a laptop that I use.

  5

  Empty the cache does not solve the problem. When I opened in SafeMode the "link email" function is no nothing.

• Satellite Pro C650: USB flash memory starts to load then crashes

  Hello

  I have my new Satellite Pro C650 laptop for about 2 weeks and there is already a problem with it.
  When I insert a flash drive into a usb drive, it starts to load, but as soon as it loads it crashes as if I disconnected, and then start loading again again and again until I have unplug it really.

  The flash disk works fine on other computers, so it shouldn't be the problem.
  Device Manager indicates that my drivers are ok.
  Is not only the USB flash drive mouse works fine when I plug in usb...

  Does anyone have an idea how to solve this problem?
  If so, thanks in advance

  Hello

  Strange in your case I recommend you test another USB key into the Satellite laptop. I know you have tested this stick in other laptops, but it would be interesting to know how the other USB key would be instrumented C650.

  I recommend in addition updated the operating system Windows and the BIOS to the latest status.
  In addition, you should go to Device Manager and delete the list of devices USB controllers. Then restart the device and wait for windows has installed again all the USB controllers.