Start up problem when having multiple databases on the machine
Start up problem when having multiple databases on the machine:I installed two databases.
When I stop the database and try to start using
Startup pfile ='... location... " ;
I get ora-12514: TNS: listener is not currently know of service rquirest in connect descriptor
When I try again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn't exist
Stop and start gave no problems when I had a database. Why I get problems when I have two databases?
I use: show the pfile parameter. SPFile; to make sure that I have the right parameter locations, the error should not be the location.
I never installed two databases on a single machine, then perhaps that I make mistake of a first - timer.
Anyone know how to get this working, i.e. start and stop DB without problems?
The oracle 11 GR 2 on Windows 7 64 bit, everything works normally.
Thank you
Ayman
Published by: aymanzone on June 15, 2011 09:27
aymanzone wrote:
My oracle_sid is set to the name of one of my databasesecho % oracle_sid %
shows me the name of my first database.
Still does not.
When I start the services of two databases by using Services, I can connect and run queries both the database.
Published by: aymanzone on June 15, 2011 11:47
First of all... the Oracle Service for the instance must be started for the DB that you try to connect or start.
Next... from the command prompt:
Set oracle_sid =
sqlplus sys as sysdba Startup pfile = 'location of the pfile respective db. Now, if you want to start or connect to another DB, which is on the same server (again assuming that the Service is STARTED)... Set oracle_sid =
sqlplus sys as sysdba Startup pfile = 'location of the pfile respective db. Published by: Srikanth on June 16, 2011 12:27 AM
From the same command prompt or other session...
Tags: Database
Similar Questions
-
Photoshop Elements 11 - problem when processing multiple files - change the size of the image
When you change the size of several images with file - process several files (or batch processing, however it is called on the menu in English)
There seems to be a bug in Version 11.
Regardless of my entries, that the file size is reduced to under 10% of the original value, such as 4 MB to 350 KB.
Even if I don't score no parameter for a change of size and also, do not change the format, the file size is decreased.
The entries in the properties / details of the converted jpg correspond to the settings in the menu, but the actual size is very small.
Seems that PES 11 has low values in the default settings in the background and does not take into account all entries.
In the old version 9, the same function worked without problem.
I installed the updated version available today, 2013-01-05.
Can you please sign this question on our return in case of problem: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
-
I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.
I have no idea where to start looking for this problem.
I do not have a disk operating system is
When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachmentHello Philipwk,
Thank you for your message. Please provide comments to a few questions so that we can better help you get your problem solved.1. are there recent changes made to your system, namely the hardware or the software?2 How long present this problem?Here are two methods to try, please try in order. If a system restore fix the problem, do not perform step 2.Step 1:Run a system restore to before that was the problem. Please click the link below to get instructions from system restore.Step 2:Create and test the new user profile.Click 'Start' > right click on 'My computer' > select 'manage '.Double-click 'Users and groups' > below, select "users".In the pane, right click on the space empty and select 'new user '.Enter the identification information you will retain and select OKRight-click the user account that you just created, and then select "Properties".Select the tab "member of" > click on "add".Type Administrators in the field and select "check name".Once administrators is added, click OKDisconnect and connect again your new account, opening pictures with your new trial account. You can even browse your other photo folder by going to the following location:c:\Documents and Settings\ (user account) \My Documents\My imagesIf it works, your profile has been altered somehow. You can then start to copy your data from your old profile to it.Please let us know if it did or did not work for you.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: "missing songs" in my windows media player then burn them on several cd :((
I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps
HelloThey were playing before you burn CDs?Method 1:
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterOpen the troubleshooter in the Windows Media Player library:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:
This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.Steps to clear the database of windows media player:
a. exit Windows Media Player.
b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
c. Select all files in the folder and then click on Delete on the file menu.Note you don't have to remove the folders that are in this folder.
d. restart Windows Media Player.
Note: Windows Media Player automatically rebuilds the database.
If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
a. exit Windows Media Player.
b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.c. Select the Media Player folder, and then click on Delete on the file menu.
d. restart Windows Media Player.Note Windows Media Player automatically rebuilds the database.
-
I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.
lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.
I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.
So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.
-
Dblink Oracle to sql server, multiple database on the same server sql under a dblink
Hi, we managed to set up an Oracle dblink to sql server and retrieve data.
The user of sql server have been using via dblink has access to multiple databases on the same sql server
But the question is how in oracle (if possible) prepend you the SQL access to this?
For example:
Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1
But we have select access to sqlserver_db2
all work well as sqlserver_user
Select * from table_fromdb1
Select * from dbo.table_fromdb1
Select * from sqlserver_db1.dbo.table_fromdb1
as does
Select * from sqlserver_db2.dbo.table_fromdb2
more in Oracle
Oracle_db a dblink sqlserver_prod. World connection sqlserver_user
everything works fine
Select * from 'table_fromdb1"@sqlserver_prod '.
Select * from 'dbo '. "table_fromdb1"@sqlserver_prod
But how to (if possible) access from oracle
sqlserver_db2.dbo.table_fromdb2
without having to create a new sqlserver_db2_user referenced in a new dblink
If oracle for oracle would be
Select * from remote_oracle_schema.table@remote_oracle_db
Hello
You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
As stated in the documentation-Oracle® database gateway
Installation and Configuration Guide
11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX
Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,
and Linux x 86-64
In the section.
The example SQL Server multiple databases: Configuration of the modem router
A separate instance of the gateway that is required for each SQL Server database. Each
instance needs its own Gateway system ID (SID).
==========
You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.
Kind regards
Mike
-
a problem in passing multiple values in the loop settings for
Hi all
I am facing a problem in passing multiple values in the loop settings for.
EX:
CREATE or REPLACE PROCEDURE (pr_id OUT NUMBER) HAVE
tab type is table of NUMBER;
TEMP_TAB TAB;
BEGIN
Select the COLLECT LOOSE pr temp_tab pr_id;
I'm in 1.TEMP_TAB. loop of COUNTING
PR_ID: = temp_tab (i);
end loop;
END TEST;
OUTPUT:-
pr_id = 234578
in the example above, I'm only a value as an out parameter. but I send you PR_ID of the loop.
why I don't get all the values that the parameters.please offer a solution for me.
Thank you my friend.More clarification, let's look at your code...
-- create a procedure and have a single numeric out variable CREATE OR REPLACE PROCEDURE TEST ( pr_id OUT NUMBER ) AS -- declare a type as an array of numbers type tab is table of NUMBER; -- declare a varianble of that array type TEMP_TAB TAB; BEGIN -- query all the values from the table into the array select pr_id BULK COLLECT INTO temp_tab from pr; -- loop through each value in the array for i in 1..TEMP_TAB.COUNT loop -- set the value of the single OUT parameter, OVERWRITING any previous value it has PR_ID := temp_tab(i); -- loop around to the next value end loop; -- end the procedure with the final value of PR_ID END TEST;
-
Problems when you try to move the 3 stepper motors
Hello
I have problems when I Isaiah to compile a 3 stepper motors control program.
I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.
I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.
-J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).
-If I try to make a sort of sub - VI is the same thing, only one motor is driven.
-Moreover, I get a warning when I try this, I have attached a screenshot of this.
I have attached the Vi and texture it to improve my description.
I woul be grateful if someona can help aport.
Kind regards.
Thanks for posting the original. By comparing the two screws immediately gives an indication of what might happen.
In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats. So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.
What you need to do is to divide the example VI in at least three parts. The first part initialization. The next part moves the engine. The last part ensures that the engine is stopped and made any required another stop. Each party becomse a separate Subvi. Each Subvi has the address of the reader as input. The initialization and shutdown parts are placed before and after a while loop. The movement parts are inside the loop. You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.
I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.
Lynn
-
Question of having multiple windows on the same computer (Windows 7 & 8)
Hello!
I had windows 8 a few months ago, but I was really unhappy with it and the worst thing, it was when I had to open a session.I couldn't log in to my account and to connect to this topic, that I had to reboot my computer like 5 times by pressing on restart button, because 8 windows on logon screen there was no stop down or the button restart so I used the DVD to install windows 7 Home premium return , but I keept windows 8 always on my computer.Then, when I installed windows 7, everything was coolbut when I start my computer it asked me what windows would I want to run but I was bored so I started that msconfig.exe on windows 7 and the Startup tab, I deleted windows 8.so I want to just get in there and I don't know how.I want once again to each boot which windows I want to run but I don't know how to do it.can someone help me? and Yes windows 8 is still on my computerYou can try to contact the Microsoft Store, if you have purchased Windows 8 home they will have a record of it and it may be able to help you.
MS Store: http://www.microsoftstore.com/store/msusa/en_US/DisplayHomePage
J W Stuart: http://www.pagestart.com
-
With the help of Mozilla Thunderbird - multiple computers use the POP server, but a new computer uses the IMAP server. Mail or back does not work
Can we change the IMAP POP server to make it easier. All my other computers POP and mail is perfect.
What can I do?First question is your email provider does support IMAP protocol?
If this isn't the case, that is why it does not work.
If they do, IMAP is a protocol much better use to check email from multiple devices.
There are a lot of good tutorials on the differences between POP and IMAP if you can do your own research on this.You don't change an account from one protocol to another.
You delete the account and add back with the correct protocol.
Thunderbird has a tendency to select IMAP as a default value. You need to stop right there and make the POP changes if that's what you want or need. -
Cannot use touch screen when you reload, ghosts in the machine.
Fellow, Hello forum members
I have a few questions:
1. when my Atrix is plugged into a wall outlet, the touch screen is no longer works, is this normal or is at - it a way to change this?
2. I have the setting to exit the screen on when charging, when I leave it all night, I'll be back in the morning and strange things have taken place, the phone is located in the middle of an application, or text message or something weird, like ghosts in the machine, you cannot disable the app/text until you unplug , because of the #1, so I don't think its someone accidentally touch.
Thank you
TGH
The Atrix is very picky with the Chargers. Use the one supplied with the phone. I had the same problem with my old HTC charger. The panic phone. I changed the charger HTC on an another outlet and it worked. I always recommend no. to use your "old" Chargers
-
Problem with networking when having multiple virtual machines on a single host
Since the implementation of ESX 3.5i server on PowerEdge 1850 Server I had network problems. It took a large upstream of the violin - do not do something specific - but finally I could persuate a VM to talk to the outside world.
Virtual machines have always been able to ping other virtual machines and physical NETWORK card to the host (with a static IP address only), however with a bit of deactivation/activation etc I could possibly get it connected. I have exactly the same symptomsusing the two Windows XP and Redhat, both with VM Tools installed.
If big, I can get the virtual machines connected, *however * every time I managed to connect a computer to the outside network, she will knock off either a return to the State where I can ping only the other VMs and Teddy.
I tried them in different port groups as well as in different vSwitches with a separate Teddy, but exactly the same problem.
I thought it was just my ignorance, however after thorough reading and wasting time trying different combinations, I started to think this is a hardware incompatibility or an ESX installation problem.
Please please please, if someone can help solve the problem, or diagnose if my suspicions are correct.
I enclose my last combination of configurations!
Thanks in advance.
Run 'show port-security' on the switch and see what you have. You can also view the current configuration of the port connected to an esx. A switch will remove any doubt relating to port config differences type.
-KjB
VMware vExpert
-
When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...
Hi Keryn_Jansen,
1. did you of recent changes on the computer?
2. you receive an error message?
3 when was the last time it was working fine?
Check if you can start the computer in safe mode or from the last good known Configuration.
Advanced Troubleshooting for General startup problems in Windows XP
http://support.Microsoft.com/kb/308041
How to fix a computer that does not start
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
-
Log on to my hotmail and it then takes me who's who or other sites, but Cain can't close a site to another, need to disconnect or change user to spend?
Hi BradDolby,
1. what browser do you use?
2 have you made any hardware changes or software on the computer before this problem?
If you use Internet Explorer, you can follow this link & check if the problem persists.
Internet Explorer does not start or stops responding
Reference: slow Internet Explorer? 5 things to tryHope the helps of information.
Please post back and we do know. -
Problem when you try to update the database
The problem I have is that whenever I try to change a certain element of customer information it always modifies a totally different number that has no meaning. in the database. For example, an island of customer id is 3 and I want to change it to 12, the number that indicates the database after you have clicked on update is 40430. I am at a loss and have no idea why he did such a thing. Here is the file change to make the changes accordingly.
= Edit file =.
<!-insert or update? ->
< cfset EditMode = IsDefined "(FORM. BusinessID") >< cfif EditMode >
<!--> film update
< cfupdate datasource = "wyi2" tablename = "Company" >
< cfset action 'update' = >
< cfelse >
<!--> Add movie
< cfinsert datasource = "wyi2" tablename = "Company" >
< cfset action 'added' = >
< / cfif ><! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
"< html xmlns ="http://www.w3.org/1999/xhtml">".
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< title > Untitled Document < /title >
< / head >< body >
<!--> feedback
< cfoutput >
< h1 > customer #FORM. BusinessName # #action # < / h1 > < br / >
< cfif IsDefined('FORM.) Events) AND SHAPE. EQ events 1 >
< a href = "add_event.cfm" > now add event < /a >
< / cfif >
< / cfoutput >< / body >
< / html >So you're saying that if you do a CFDUMP and CFABORT just before your update request then Form.IslandID is, for example, 4; but he actually wrote a number 5 digit to the database? Because it's all just ridiculous. Are you absolutely sure that you have not named two identical form fields? If you do this, CF will concatenate their values by commas that CFQuery will almost certainly do everything right in the database because it assumes that it is what you want.
Oh and read about CFQueryparam.
Maybe you are looking for
-
Hello world! Having trouble with the Skype Desktop Client application. c. 7.17.0.105 The main problem is that Skype refuses to mark as read most private conversations, until you write a message back. Chatty group works very well. Some of my friends o
-
Hello I have a little trouble with my g20-156.He had ceased to find wireless networks, whereas it was need a bit of cleaning up anyway, I restored it back to factory default settings.The good news is that the wireless problem is now resolved - the ba
-
I see in my logs [DoS attack: go Kill] source: 85.252.162.7, port 123, Monday, September 26, 2016 17:57:50[DoS attack: go Kill] source: 195.154.174.209, port 123, Monday, September 26, 2016 17:55:03 [DoS attack: RST Scan] source: 188.121.36.239, port
-
How do I download the printer OCR component series F2200
Hello I uninstalled the F2200 printer driver and now after reinstallation, the OCR component is missing. How can I install it? It came with the printer when I bought everything first.
-
How doI change my E drive to the D drive designation without moving cables
I am setting up a Linksys network drive. Is it forces me to insert a blank diskinto my E drive. I have only a drive and D on this computer. How can I change my D drive to a designation of drive E without moving cables