Start XPS 435 MT Studio problem

Hello. It is my friends desktop. I wanted to throw this situation after the forum and get reactions. The computer is a Dell Studio XPS 435 MT running Windows Vista. I noticed that the power light is flickering/flashing fast and the yellow led on the motherboard was also blinking. No light was present at all the power button. After that leave it plugged in for a while, I pressed the power button and it started. I also noticed that the color of the green power light and motherboard light now have a solid color and DO NOT flicker. What does this situation? A new battery is required for the motherboard? Please let me know what you think. Thank you!

More like a power supply failure.

But the battery is not expensive (~ $2) so you could replace it, just to rule out it as the origin of the problem. It is a CR2032 3 volt lithium ion battery.

Tags: Dell Desktop

Similar Questions

  • Studio XPS 435 t display problems

    I have a Dell Studio XPS 435 t desktop and a Dell Inspiron 560 monitor flat screen Dell ST2310 23 via a port two IOGEAR KVM sharing switch. I have a Samsung TV HD 7100 that I am connected to the Studio XPS video card HDMI port and it worked beautifully, better than I expected. However the Dell monitor has become completely black except for the cursor that lights up when I move the mouse. According to the specifications, the video card Radeon 4350 in the XPS is capable of driving two screens at the same time. If I unplug and then reconnect the HDMI cable going to TV Samsung monitor analog Dell ST2310 returns to the top except there is no bar of tasks or cursor, simply on the desktop. Two display (monitor and TV) devices work perfectly by themselves, but I should be able to use them simultaneously. I scanned for and determined that all drivers are up-to-date. I tried VGA for monitor / output HDMI to the TV with the above results. I tried to use DVI on the monitor, but get no signal HDMI plugged. How can I make this work with what I have?

    Wow, that's a long way for a HDMI signal to run, but it works!

    If your two connections are VGA and HDMI. The Catalyst Control Center shows two monitors?

  • Studio XPS 435 t / 9000 power supply problem

    My diet giving me in my Studio XPS 435 t/9000. The fan is very noisy, but otherwise there is no obvious symptoms. Since the system is about 5 years, I was planning to change some parts.

    My questions are:

    (1) what could be the cause of the fan to be strong, and what are the potential problems with that?

    (2) a system of 435MT 475W PSU would be compatible, or would I need specifically a 435 t?

    The first thing I would do is keep the Office of your garage. Open the side cover. Use compressed air can and blow all the dust that has accumulated in the tower. Blowing from the rear of the PSU and the inside of it. Replace the cover and retest for the noise of the PSU. The power supply 360w on Studio XPS 435MT will not work. The only Dell validated PSU for the Studio XPS 435 t / 9000 has been F217J 475w. The best video cards, we validated our eating 475w were:
    2XTG4 AMD Radeon HD5870
    5X2CH Nvidia GeForce GTX260

    You might consider installing a power supply of higher power, but with a single card video, you need something bigger then a 650w. You could then spend the video card for sale retail Nvidia GTX660.

  • Stops randomly on the new desktop Studio XPS - 435 t/9000, please help!

    My parents spent an obscene amount of money on their computer, however, some being computer illiterate they needed me to help out, which I'm all too happy to talk. So here's the problem, the card will be at the end.

    As long as they have had this computer there randomly stop, little by little is that after large amounts of time to be under a light load (I would say 25% of capacity). He would not give an error or close the problems one by one, power, and everything shuts down (turns screen black computer is silent). He tries to return as if you were starting a shutdown computer about 5 seconds after it turns off.

    I thought it was overheating, so I installed a few programs of the manual fan control and ran a few tests with Prime95 torture. Overheating shutdown for CPU was at 90 c, but since the computer is idling at 36 and 62 max on a charge is no longer me, overheating is the problem. So the only thing I can think of that might cause the problem is the power supply.

    It was a costly computer and I do not want my parents wasted their money on it, any suggestion/help will be greatly appreciated , because I'm stuck and do not want to tell my parents to buy a new PSU, if this isn't the correct answer to this problem.

    Any other information needed is provided if I can find a way to find it on request.

    = care =.

    System of pre-ordered computer office = Studio XPS 435 t/9000

    OS is Windows 7 64 bit Home Premium edition.

    Card mother = Dell Inc. 0X501H.

    = 12G DDR3 memory

    Graphics card = Nvidea Geforce GTX 260

    Power supply = (not sure, I couldn't find the model however, it came with the package of desktop computer Studio XPS 435 t/9000)

    Had the same problem. Fixed what mine was enter Bio going to change (power management features) S3 to S1, save the changes. Never had the problem again. Don't know what I did. But it worked!

  • Dell studio xps 435/9000 new cpu required

    Hello

    I posted here earlier on my dell studio xps 435/9000 beeping non stop on start up.  I discovered that the CPU is the problem and must be replaced.

    I have an Intel Dual core i7 (socket LGA1366) processor, what are my options for replacement?

    Can I he move to a Quad core as long as the plug is the same, or should I stick to a dual core.

    If I replace the processor should I replace the motherboard as well?

    Is there a way to know if a particular processor is compatible with my motherboard? (the other is the same)?

    Any help is appreciated, thanks!

    alymad

    The following processors are compatible with the Dell Studio XPS 435 t/9000:
       
    Intel Core i7 920
    Intel Core i7 940
    Intel Core i7-960
    Intel Core i7 965
    Intel Core i7-975

    Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

    Bev.

    Edited to add content.

  • Upgrade of RAM Studio XPS 435 t

    I have a Studio XPS 435 t, 64 bit, Windows 7, with 8 MB of Ram. (4) 2 MB sticks in slots 0-3.

    I'll upgrade to Windows 10 and have been informed that I have the 8 MB is less realistic.

    Can I add 4 MB (2) sticks to the empty slots, 4 & 5, or do I put 2 MB sticks in them like the others?

    Or is there a better solution?

    Thanks in advance

    The 435 t is not on the list of Dell systems tested for their compatibility with Win 10. This means it will not work win 10, but you might have a few driver problems that Dell won't help you solve. So before you do anything, it would be a good idea to your Win 7 HDD on external image so that you can quickly return to Win 7 if Win 10 does not work right.  At a minimum, back up all your personal files to an external support.

    Check the RAM installation Manual in the 435 t (not MT). You need the corresponding modules in slots 1,3,5 (blue) and matched modules in 2,4,6 (Pink). If you cannot add 4 GB modules to empty slots 5 and 6 If the other passers-by have 2 GB modules.

    You can get 4 x 4 GB of RAM for this model ~ $100 + at crucial.com to replace what you have now. Or you could buy 3 x 4 GB to fill the blue slots and use the old 3 x 2 GB of RAM (assuming they are all matched) into the pink slots for a total of 18 GB.

    The crucial guarantees that RAM will work if they recommend the modules for a specific system, or they take it back.

    Only you can decide if the cost is worth it for an old (er) PC. And you might want to try upgrading to win 10 first before spending $ on new RAM.

  • 3 hard disks can be put in a Studio XPS 435 t / 9000 system

    Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
    and type of witch I can use

    kingwarez

    Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
    and type of witch I can use

    kingwarez

    Yes, the Studio XPS 435 t/9000 supports three 3.5 ", SATA drives, see page 57 here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_User%27s%20Guide_en-us.PDF

    You need a SATA, 3.5 ", internal hard drive 7200 RPM, a SATA data cable 2 x 6-32 x 1/4 cylinder head screws to install the drive, there should be a spare 15 pin power connector SATA for him in the case.

    The Service Manual is here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_service%20manual_en-us.PDF

    Bev.

  • Studio XPS 435 t / 9000 desktip - new hard drive compatibility

    I may need to replace the hard drive on my Studio XPS 435 t / 9000 office. How can I make sure that the new hard disk I receive is compatible with the computer? What should I look for? I see one in the Dell store, but it takes 3 to 6 weeks to ship! Thanks for any help.

    Roman J

    You can install all internal, SATA, 3.5 ", hard drive 7200 RPM, up to 2 TB in size.

    Best to search hard drives Western Digital and Seagate brands, also check the length of the manufacturer's warranty, plus the better.

    A good salesman for hard drives is www.newegg.com

    Bev.

  • Studio XPS 435 t/9000

    Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

    gwberesf

    Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

    gwberesf

    The following processors are compatible with the Dell Studio XPS 435 t/9000:

    Intel Core i7 920
    Intel Core i7 940
    Intel Core i7-960
    Intel Core i7 965
    Intel Core i7-975

    Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

    In addition, the following discussion has useful information on the Dell Studio XPS 435 t/9000 processor upgrade:

    http://en.community.Dell.com/support-forums/desktop/f/3514/p/19500829/20340094.aspx#20340094

    Bev.

  • XPS 435 t - graphics card double slot?

    I guess we can integrate a video card double slot the existing PCI-Express 2.0 16 slot. I do not if I hide the adjacent PCI 1 slot because it is empty.

    If dual slot graphics cards stack up?

    It's absolutely, positively FALSE.

    Why say that?

    The Studio XPS 435 / 9000 video slots has full size. Total and 6 locations.

    A range of maps of graphics ATI including the Radeon HD3450, HD3650 HD4670, of the HD4850 and HD4870

    The map in the image below is a DOUBLE WIDE 4870.

    I recommend the upgrade of a corsair CS750M power supply if you plan to use a map of hunger of power such as Geforce 960 because the 475W stock power is a bit too small IMHO.  I had an EVGA GeForce GTX 960 SuperSC ACX 2.0 + 2 GB memory GDDR5 128 bit, 02 G-P4-2966-KR to work with the power supply but I was not comfortable leaving in this way.

    The Studio XPS 435 t uses 1333 MHz DDR3 non - ECC and non - ECC DDR3 1066 MHz.

    The User Guide , page 24.

  • XPS 435 t/9000, Fans question

    Recently, I decided to move my computer to a different area in my house, and before any connection back decided to remove the lid and blow with can of compressed air things. When I got my computer all hooked and am on and has started playing the MMORPG World of Warcraft, I noticed that my fans have remained at slow speed as it normally does when idle at the office instead of speed up games. Before I cleaned my computer, it would be stronger when I played the game, but now it remains to speed all the time.

    When I cleaned up my computer I didn't not remove or touch anything. I checked and all fans are moving and I have the latest version of the bios. The wrong power cord could this do? When I moved my computer I could have used the power to monitor cord instead, but he two 10A 125V only difference is one is thin plate like the look and the other is round. I don't remember that we went to the monitor well because I forgot to mark them. If someone could give me some advice, I would be happy. IM worried I messed up something because normally fans are supposed to increase the speed that it becomes warmer and mine is not.

    XPS 435 T/9000
    Windows 7 Edition Home Premium 64-bit
    1 TB harddrive, 9 GB ram
    Intel Core i7 920 @2.67 GHz
    1 GB ATI Radeon HD 5700 graphics card
    The latest drivers and bios

    Gamerear15
    Is it supposed to be very little air coming from the PSU to the rear vent?

    Depends on if the power supply fan is designed to blow the hot air out, or expel cool air.

    I think you're very well if there is not to freeze or BSOD. Just so enjoy your games - with a system at rest!

  • Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

    Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

    Hi Comintern,

    ·         Did you do changes on the computer before the show?

    ·         You receive an error message or error code?

    Follow the suggestions below for a possible solution:

     

    Method 1:

     

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

    Let us know the results.

  • XPS 435 MT and Windows 8

    I see that the XPS 435 T is not recommended for Windows 8. I have XPS 435 MT will be able to run Windows 8?

    I did a migration from Windows 7 to Windows 8, not pure install, that way I don't have to reinstall all the SW I have on the PC. (Vista to Win 7 migration I did a few years ago)

    I have an ATI HD4850 graphics card. ATI does not support this card any longer, so ATI does not provide to WIN 8 drivers. However, Windows 8 is compatible with this graphics card with own drivers.

    The motherboard Bios that I have updated to Version 1.1.4 there years

    What surpised me is that my Miccrosoft Webcam, LifeCam VX-6000, is not compatible Win8.

    It still works under Desktop mode to win 8, for example, in Spype. But using the version Skype metro camera is not visible. So I bought a new.

    VirtualCloneDrive I had to reinstall after upgrade of Win8.

    Verification of the compatibility of the Win8 said most things is not compatible I before deinstatlled migration to Windows 8.  But it was only a few items listed.

  • XPS 435 t/9000 Max size of the hard drive?

    Hello

    I have a XPS 435 t/9000.

    I currently have two, 1 to SATA HDD and need for additional storage space.

    There is a 3rd available Bay, a connector available on the motherboard and the power available.

    Reference Dell tells me the motherboard is a Microstar International X501H and the motherboard will limit myself to a 1 TB drive.

    HOWEVER, I found several online vendors that sell to larger capacity of disks and state that they will work on this machine.

    I will ONLY use the 3rd disc as a data reader and will not boot from it.

    Can someone tell me DEFINITELY HARD drive supported (data only mode) via the connector on the motherboard.

    IN ADDITION,.

    Are there options to add a new HARD disk controller to an expansion slot?  (I have no slots half remaining due to other small improvements).  I need all THE details on what I did not research on this yet.

    Thank you very much!

    INTEL RST less than 10.1 DOES NOT support greater than 2 TB.

    Intel RST RAID DOES NO more than Volumes Raid 2 to support.

    You cannot use the last 11 12 13 14 versions of INTEL RST with older Chipsets.

  • Need help with video off a XPS 435 t card

    I am trying to replace my video card in my XPS 435 t but for the life of me can not find a way out of my case.

    There is a big black on the top of the video card to connect on a support type plastic black plastic on the front of the case and I can't understand how to unlock it.

    Here is a picture...

    Any help that anyone can provide would be much appreciated!

    Hi John,.

    Please see the below pictures to remove the graphics card:

    1 locate the great video card.

    2. lift the expansion card retention.

    3. press the tabs on the bracket to support PCI and push holder at the back of the computer until it clicks into the slots at the back of the computer.

    4. Locate the screws on the video card.

    5. remove the screw that is blocking the video card.

    6.

    Unplug the power cable from the video card.

    7.

    Press the release lever while lifting the free version of the connector.

    8.

    Pull up at the end of the video card based on the fan to release.

    9 remove the video card from the chassis.

    Please check and answer if this helps.

Maybe you are looking for