Starting four minutes?

Similar Questions

• El capitan extremely slow on end of 2013 iMac, especially at the start (5 minutes)

  Hello

  Recently, I went from an iMac end 2006 (installed 10.7.5) to a new end 2013 iMac (with el capitan) using the migration wizard.

  My new iMac literally crawls at the start: before being "usable", it takes all five minutes to present the elements of office and start (I only dropbox, 1Password, Alfred littlesnitch enabled and I cleaned all the startup and user logon items old and systemic); After this the iMac works very well, even if it's not lightning fast I must say (looks like a little lag is present for each new task: opening applications, files and so on).

  As soon as the iMac starts a time machine backup is started automatically.

  I used etrecheck and nothing significant has shown and also one of the @linc scripts used to test the system (unfortunately, I'm not really able to fully understand the results, but perhaps that something is 'locked'...).

  Console is spammed with messages, especially at startup but projector not only in regard to, mds, xpc...

  I will post any other relevant information as requested, if anyone is willing to help.

  Thanks in advance

  Ciao

  Without posting actual results Etrecheck and/or Linc-script, nobody will be able to guess what is happening.

• Noisy fan - fan starts 15 minutes after turning on the Qosmio F10

  My Qosmio F10 has always had a very noisy fan. The fan noise starts always 15 minutes after turning the PC on and stays of less regardless of what I do on the PC - even if this happens be nothing else!

  I tried to change the battary cooling method optimized in the toshiba saving settings in an attempt to stop the fan coming on but any change of setting seems to have no effect on the fan. I did a search on these forums and found a link to the utility fan - but the link now appears to be dead and someone somewhere else also suggested update but tv pilots who did not work or the other. Anyone have any ideas on how to make this laptop less noisy?

  It's all a bit frustrating saw I bought it to listen to music - and all you hear is the fan when the music calms down!

  Thanks in advance

  Believe me that it is not unusual that the F10 is a laptop with a high GPU and CPU. These regions produce a lot of heat and it must be cooled!

  Please don t compare mobile portable fans with the Qosmio. The Qosmio laptop properties resemble a PC and in my view a desktop PC is much stronger than the F10

• a6720f - start 27 minutes - please help

  Today, bought a renovated a6720f. Turned on, see the blue HP screen (with a green thumb and the HP logo) that has 4 options:

  F10 - installation

  ESC = Boot Menu

  F11 = system recovery

  F9 = Diagnostics

  and on the bottom v5.15

  This screen stays here for 25, 27 and 29 minutes, and then it starts slowly.

  Anyone have any experience?

  Solved! Finally, after 8 e-mail exchanges, with me rejecting their offers to check for the presence of virus, follow the steps if restart my windows 7 unexepectedly, I think they haven't really read my email from the start, I got this to do list and it worked:

  1. Click Start.
  2. Type msconfig in the start search box, and then press ENTER.
  3. After that, click on the Startup tab.
  4. And then click Advanced options.
  5. After that, click on the dropdown under the processor number
  6. Then select the maximum number and click ok.
  7. After that, under the general tab remove the tick load startup items.
  8. And then click on apply and then ok.
  9. And then restart the computer and check.

• Tecra R850-117 starts 5 minutes after calving

  My Tecra R850-117 off, it restarts automatically after 5 minutes exactly.

  This is an unwanted behavior because it drains the battery while I don't use the laptop and it could also damage the bearing drive around during the race...

  Anyone know what could cause this problem and how can I stop it? The laptop is 6 months old and I notice this behavior only in recent weeks. I have already noticed that the battery could be emptied after not using it for a few days (probably because of the same issue?), but never noticed the unwanted reboots...

  Thank you very much in advance for all the tips.

  Erik.

  Hello

  You have disabled the wake-up options in the BIOS?
  Check it!
  The permit * wake-up options could power on the laptop, even if the power is turned off.

• Satellite C660 - fan start every minute

  Hello

  I just buy a Toshiba satellite it there two days now, but the fan turns on every minute when I go only on the web...

  Listening to music / videos, it is almost drowned out by the noise, but otherwise it's really headlock.

  It blows every minute 10/20 s and force even if he is not so strong, it's really disturbing.

  Is this normal?
  Please

  Hello

  The fan would turn if the CPU would be stressed.
  You can check in the Task Manager process stresses the CPU and could check if you can disable it.

  In addition, I would recommend checking the Win 7 Power Management
  There you can change the settings of the optimised battery cooling modules.

  Hope this helps

• ESXi 5.1 2 minutes delay start

  Hello

  How can I program a delay for a 5.1 ESXi to start 2 minutes?

  It starts at faster now...

  Sorry its my fault its setting BIOS but on M520 is enough no be limited i.e. no delay range.

  In any case, try adding this command 'sleep 120' local.sh leader just above line exit 0.

  See this KB:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2043564

• Screen saver starts sometimes incompatible

  original title: incompatible screensavers

  Hello - there seems to be a lot of people who talk about a situation of screensaver. If you set the screen saver to go [for example on the 60 seconds] often lights up once the way you set - but other opportunities to go on where there are sixty seconds on any activity - it will not go on 'properly '. It lights up and two or four minutes instead of in sixty seconds like you said.

  Also...

  Is there a webbsite that appear to explain the situation a bit. They said that if the screen saver turns on how put you it, but you move your mouse off the screen saver because you're here something to your computer - called a "rapid" your screensaver dismissal - they said that, supposedly, the computer is aware that you would rather the screensaver not go on immediately. Also supposedly because it is aware of this - it temporarily changes the screen saver. For example, it takes your second choice 60 for it to go and added as 15 seconds [60 + 15]. Supposed to be if it lights up and make you an another 'quick dismissal"your screensaver, he did something like [60 + 15 + 35]. If you do it again it supposed to be once again made something like [60 + 15 + 35 + 45] or something like that also. This webbsite also said that there is a way to make your computer do not do this and do your "strict" screen saver and always go on the way you put to go on. They did not mention if this is why they did it or if that's their opinion.

  That's why...

  A - why screensavers are often not on how you put them to go on - even if the mouse or keyboard is not moved somehow?

  B is there a way to set the screen saver to always go on the way you put it to continue even if you move your mouse to take off for some reason?

  Hello

  Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

  If the article above is not enough, you can post on Tech net.

  Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Windows Vista could not start and wants me to run the Startup Repair tool BUT

  It does not work... it takes forever and then asks me to load the drivers... where are they located? I can't find them on my Vista disk or my drivers disk... using a Dell Studio 17...

  When he goes into repair mode it gives a big arrow after about three or four minutes... then in another five he asks for keyboard language, then select the driver...

  where should I go from here? I know that this has already been answered, but I can't seeem to get there

  Here is an article from Dell on how to do a manual reinstall of the operating system (but note this is a clean install and not a system/upgrad repair install so it will wipe clean all the process data): http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=339949.

  If you have an Installation of Vista genuine disc, you may be able to do an installation of repair/upgrade of the system (which would be better than the above option).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.  If you have problems to install the drivers, read the article above by Dell on how to obtain and install the drivers - it should apply in this case as well.

  If your system is still under warranty, contact the Support technique Dell and they probably have you will help with your problem over the phone free.  If she is no longer under warranty, there are still a few options of support at their Support Center who may be able to help. http://support.dell.com/support/index.aspx?c=us&cs=19&l=en&s=dhs& ~ ck = mn or http://support.dell.com/support/topics/global.aspx/support/dellcare/en/contact_technical_support?c=us&cs=19&l=en&s=dhs.  \

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• code 8007054f re KB9710323 my computer starts repeatedly try to install this update

  Please notify that this update is causing problems on my computer as it starts four times, whenever it is stopped

  Handits,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Is there a way to configure my laptop to start automatically when it's plugged in?

  I want to make sure my laptop will automatically start the minute it is plugged. I use it a lot for work and would be handy when displaying presentations.

  Is it possible, without going through the BIOS (most old laptop - does not power options in the BIOS menu) to ensure that this happens?

  The BIOS is your only option, the operating system can't help you because it is not aware of the world until it starts.  This is what is for, the BIOS at startup of the operating system.

  BIOS is basically your only choice, but given that you don't have it, you're kind of stuck.

  Why not try the waking state?  Windows 7 has sleep very reliable performance.

• Fast beep then starts when you start XPS 8700

  so I just got a dell xps 8700 and immediately improved, the 650 Watt PSU and GPU to a gtx 980, when I start the machine he has has a very quick chirp and then starts as usual. given that I don't normally it starts the minute I got it that I don't know if this is normal or not, I think that I probably wouldn't put in updates before you start it at least once. Can anyone confirm if this is normal? or does that mean? I don't think that it s the code beeps it starts very well after the beep.

  What version of BIOS is installed on this system?

  Not sure if this is your problem but some previous versions of BIOS makes a quick beep at startup which was perfectly normal and indicated the JOB was complete. But it has been be mistaken one - beep error code meaning "card mother failure."  For later versions of the BIOS deleted the normal POST beep.

  As stated by Jennifer, you will need to restore the material to its factory condition to find out if your upgrades are originally the beep at the STATION. This is why it's always a good idea to test a new system first, before making any major hardware upgrade.

• 2-minute video takes 30 minutes to render?

  OK, I have an Intel i7 860 Quad Core processor, overclocked to 3.7 Ghz, 8 GB of RAM DDR3, windows 7 64 bit,

  I used Adobe After Effects CS4 with the latest updates.

  I put the settings to make quickly using 4 all CPU. I have a video of 2 minutes with very little effect... basic fade transitions and change in tone of the color and contrast. The video is in HD 1920 x 1080 29.97 fps.

  Why always takes 30 minutes to render a minute 2 video?

  Thanks to all who help me!

  I save out as "Quicktime movie" using "Photo-jpeg".

  Why do you use PJPEG? Most of the people don't know what to do with this codec.

  best settings are used.

  At all levels? Do you have motion blur or interpolation activated?

  Woah, I just dropped it for 13 minutes... He says: "59% used 4.0 GB" I thought anyway 8GG I do use more ram?

  AE can't get very far to talk about what whether your rendering. The following image might include a huge image with heavy effects and estimated time could spend three days. And in three or four minutes, he could fall to 10 seconds.

  RAM does not necessarily increase the rendering speed of the AE. You can search 'rendering speed increase' or "decrease in rendering time" here for several hours. I have no patience with these positions. My first AE projects required whole weekend to make an effect on a single layer. Made today in AE abilites is nothing miraculous.

  bogiesan

• Why does my work Launchd suddenly stop

  10.9.5 OSX

  MacBook Air 11 inch end 2010

  I have a running on this MacBook launchd job. The job runs a shell script every four minutes. This shell script renders an image of the webcam and upload it to my site.

  Most of the time it works fine. But, every once in awhile the launchd simply stops working. If I unload and reload the file plist, work begins to run again. Other job opportunities continue to operate without problem.

  What can stop a job to run?

  The job was created with Lingon X.

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > disabled < / key >

  < false / >

  < key > EnvironmentVariables < / key >

  < dict >

  < key > PATH < / key >

  < string > / usr/local/bin: / usr/bin: / bin: / usr/sbin: / sbin: / opt / X 11/bin: / usr/local/sb in < / string >

  < / dict >

  < key > tag < / key >

  < string > com.mgnewman.webcam < / string >

  < key > ProgramArguments < / key >

  < table >

  < string > /Users/mnewman/bin/chaamcam.sh < / string >

  < / array >

  < key > QueueDirectories < / key >

  < table / >

  < key > RunAtLoad < / key >

  < true / >

  < key > StartInterval < / key >

  < integer > 240 < / integer >

  < key > WatchPaths < / key >

  < table / >

  < / dict >

  < / plist >

  The first question I have is that newspapers have to say about this?

  Any error condition must be connected in /var/log/system.log is the starting point.

  In addition, processes can get strangled if they lay too frequently, and a work can not be started if his previous incarnation still - is - it possible that she was taking more than 4 minutes for the script is running, and that blocks the next invocation?

  In both cases, you must delete the key your .plist RunAtLoad, since it applies here (man launchd.plist has more details on this key).