starting probems,

Similar Questions

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• CPU does not start. No beeps.

  I have a Compaq Presario SR1729NX. It's mostly stock except for the memory and video update. I noticed a week or two ago she turned slowly. When I went it reboot, all the lights were flashing as they do normally, but the fan just spun and 'polyurethanerouge '. Held the power button for 10 seconds and it has restarted correctly. A restart a week later took five times. Today, it does not start. I read through the forum, and a person with a similar probem was asked about a bulging capacitor. I don't have one, but it is not rounded to the breaking point. What are the chances that a bulging capacitor is the problem? I'll be able to fix it myself? Thanks in advance for all advice.

  The motherboard is: EK458-69001

  I found a supplier for this part right hereonline.

  Motherboards are not so difficult to replace in a desktop computer.

• Buenas tardes mi problema're salio una ventana as dice, Windows has detected a hard drive probem

  Buenas tardes mi problema are what salio una ventana as dice, Windows detected a disk hard probem. > back up your files immediately to prevent the loss of information and then ask the computer manufacturer to determine if you need to rapair or replace the drive > in las ventanitas sale abajo luego.  Start the backup process > ask me later > there don't ask me about this problem (not recommended) > y retail fr.  Dice for immediate action.  Because a disk failure will make you lose all programs, files and documents, on the disk, you must back up your important information immediately. Try not use that you have repaired or replece the hard drive. > Which is a failure? The following hard disks are fault condition: disc name: TOSHIBA MK5065GSX. volume: C:\:D\ > este're mi probema espero can help me gracias are only soy nuevo in esto, todo lo copy are only no entiendo than of Frances y como dice el said (el ingles still no lo learn y el Español is to me esta olvidando) Gracias.

  Hello
   
  Sorry, this forum is in English only.
   
  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.
   
  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:
   
  http://support.Microsoft.com/common/international.aspx
   
  Concerning

• Acer Aspire 5742Z Notebook does not start

  I am running Wndows 7. When you press the button "power on", that the power light turns on, the fan starts, the DVD player made his usual noise and then after 3 seconds, all this stops and all the lights go out. The system restarts immediately, and the process is repeated - over and over again. He just constantly loop. There is nothing showing on the screen at any time.

  I checked the RAM and HARD drive and they seem to be OK. I removed the DVD player and tried different combinations of race on foot with and without lead power and battery connected. All to nothing does not. I can't access the BIOS even by using the Fn + Esc key combination.

  I'm now leaning to believe I have a probem m/Board.

  If anyone has a solution I'd love to hear it!

  Shrappers,

  Looks like you are on the right track and did all the correct steps for the issue. I agree that the problem is hardware related. All devices seem to be powered, but the loop could be linked to the motherboard.

  If you are looking for repair, please contact technical support in your region. If you want to repair yourself you can always contact one of our partners in parts for a motherboard.

• : Error at the start of the disk system check "Windows is unable to read the disc.

  Original title: Probem with Partition

  My laptop has a 'C' and 'E' of the hard drives. The system works on 'C' drive 'E' is mainly used for personal files/documents/pictures/etc.. For some reason, the 'E' drive is unreadable/corrupted. The properties option displays no space left "ALL BLUE". The check disk option does not work and it says that Windows cannot read the disk.

  I don't know what happened. One minute, he was working, then it is not.

  Ideas and solutions will be appreciated.

  Moreover, from the computer goes straight to the disk check. Loads of messages about unable to read are displayed.

  I am running Vista SP2 on a Toshiba Satellite Pro.

   
  Hi Louis Harrison.
   
  1. what exactly happens when you open the E drive?
   
  Try these steps and check the result.
  Step 1: Check the permissions on E:
  a. Click Start, click computer.
  b. right-click on E:, and then click Properties.
  c. click on the Security tab, select your username under "names of users and groups" and check if it has "Full control" if she's not here, and then give full control access.
   
  Step 2: Look for disk errors
  a. see check your hard drive for errors
  b. restart the computer and check the result.
   
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to start CCPackager

  After downloading CCPLauncher.exe and started as an administrator on my PC (Win7Pro perfectly set to date) it starts the download of CCPackger, but at the end it crashes with an ERROR Code A12E1.

  Any idea?

  Today it seems ADOBE has a few probems, even the cat (in the area of team management) system does not...

  Determined to restart the PC, no antivirus, no spots open and finally worked.

• Cannot restart MacBook after starting Mac OS Sierra

  I have problems with the installation of Mac OS Sierra. It jammed last night at about 90%. I stop. This morning, I tried to start it without success. I then started with the command and R and choose to reinstall the software. This seemed to work, took forever, but when he resumed at the end of this process the small white obtained progress bar all the way to the end while it froze. I just talked to apple and told to try again, which I am. It took about 3 hours this morning. I checked my HD there are 117 GB of space. Another person had the same problem and managed to fix it?

  Start by holding down the command + R keys again if you can access the construction in utilities to check and repair if necessary startup disk, and then try to install the Sierra.

  On macOS recovery

• iMac does not start after the update of the Sierra...

  Don't know what to do. Sierra, just updated and now my system hangs during startup and turns off.

  Anyone else seen this? No idea what I can do?

  Try a safe boot. Otherwise, you might to reinstall macOS.

  ----------

  Stop your Mac. Use the power button if you wish. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of tasks. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you may have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find bad.

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• iMessage hangs when starting

  My iMessage application crashes on my Macbook Pro 15 inch (last El Capitan), immediately after it starts. Error message is:

  Reason for termination due to an untrapped exception "NSInvalidArgumentException" app,: '-[__NSCFString getBytes:length:]: unrecognized selector sent to instance 0x7fb1db0d7560'

  ending with an exception uncaught of print type

  Abort() called

  It started recently.

  I tried to remove preferences, saved etc. which none has helped States. Does anyone have any ideas what to do?

  Hello

  There is an app Messages having an iMessages account.

  In fact, it may have a Hello 'Account' AIM, Jabber and Yahoo, not to mention the many you can have.

  One of them could be the cause rather than the iMessages one.

  These: -.

  NSInvalidArgumentException

  See if the data of one kind or another in the past between the app and other places he works with.

  In some cases, the 'reason' may include a reference to something being 'null '.

  In these cases, this may mean that the Contacts App has no listed correct My map, in some cases, this means that Mac user account name and my card Contacts do not seem to match.

  Can you be specific about which .plists you deleted.

  Some with ichat in the name refers to the functions most basic application which have been there since the app was called iChat.

  For example, it might be the sort of friend order if you have AIM, Yahoo or Jabber accounts.

  This Yahoo have released a new version of their Messenger which seems incompatible with what they had before.

  It seems to stop the Messages application entering this account.

  I don't think that is the question here because I don't have this problem myself.

  Can you remember if you changed anything in the Messages recently?

  Present themselves as one or more individual items contact lists?

  Changed a State Message to a buddy list?

  Changed the "conversations of beginning of" setting on the iMessages account?

  Deselected an alternative email or number of iPhone?

  

  20:32 Thursday; October 6, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• Starts two windows shows

  After you have installed windows on my Macbook Pro 13 "2015, installing bootcamp is not delete my iso installation of windows partition drive.

  When I press 'option' to choose which partition to start in the start menu, there is a Macintosh disk which is my os x and partition of two windows.

  The first is the windows operating system and the other opens just the installation.

  How can I remove the installation partition and give space on the windows partition?

  Thank you!

  Also, when installing windows 10, I pressed accidentally the "option" key after the installation finishes (it goes then to the start menu) and then I select the windows partition to boot windows. I don't know if that will cause a problem like that or not.

  Problem solved,

  After the start under os x, the installation of windows partition is removed.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.