starting system failed at checkpoint [USBd]

Fact a reboot after upgrade to Office 2000 to 2003 and the screen froze with a blinking cursor in the dark.

F2, F11 or F12 does nothing.

Ctrl + alt + tab produces a momentary vision of the start screen and changes to a black screen with the message: «...» "Previous attempts to start this system have failed at checkpoint [USBd]... »

I need help to get back on the pc. (Dell Dimension 2400 Series, version of the Bios A02), Win XP.

Hi Befudd,

We are happy to know that your computer works as expected. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

Tags: Windows

Similar Questions

  • Error: alert! Previous attempts to start this system have failed at checkpoint [size].

    I tried upgrading the video card in my dell dimension, but doing so caused this error, error: alert! Previous attempts to start this system have failed at checkpoint [size]. I removed the new video card and put the old one back, but the error still occurs. Any help on how to fix this error would be much appreciated.

    Not necessarily...

    Power off, unplug... Remove the motherboard battery... Remove all memory modules except to location 1. Reinstall the battery and see if it boots now.

    Then, repeat the process and share all the modules on the slot 1, one at a time until you ID a bad module. If they all work in location 1, add modules one at a time for other locations until all are reinstalled and it boots or you ID a bad location.

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

    I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

    Bookmarks are stored in a file called places.sqlite in the profile folder.
    To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

  • I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

    You probably should have updated to 10.5.8 first.

    Installation or update of Snow Leopard:

    http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

  • I can't install it last update for itunes on my pc. When I try and download it and it's over, he said, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.

    I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    Right-click on the downloaded installer and use run as administrator.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Starting test FAILED - HP ENVY 1191-NR

    Hey guys/girls,

    New to the forum - need some tech support.  I have a HP ENVY3D 1191-NR running Windows 7.  He recently began closing before you start completely.  I ran a Test at startup and for the following results:

    Memory test: FAILED

    FAILURE ID: QE40XL-5GE6G4-XD0141-400103

    PRODUCT ID: YL748UA #ABA

    Memory module

    Starting test: FAILED

    I wonder if that means the RAM of the computer has gone wrong and I need to replace, or else... ?

    Thanks in advance to all.

    Hello:

    Yes, that could indicate a possible memory module failure.

    What I would do is unplug the PC and remove the battery.

    If the laptop has two memory modules, remove one of them and plug the power adapter.

    See if the PC starts and works normally.

    If so, unplug the adapter, remove the other memory module, put in the first one you took, connect the a/c adapter and see what's the result.

    If the PC does not start, you have isolated the bad chip and you can just buy a new one with the same characteristics.

    If the PC is still under warranty, contact HP for a replacement.

  • Hello services did not start, check the sufficient privileges to start system services

    I have a Dell desktop computer - over 6 years running windows xp. I've been using itunes for several years, update without problem until a couple of months ago when I got this error "Hello services could not start, check the sufficient privileges to start system services. I tried to delete everything from itunes etc following the instructions from apple forum - but still get the error. I tried to restart Hello in the service of my computer menu - but now it doesn't show even Hello - I have tried to load Hello - same error... help - I don't want no Hello == I just need the latest version of itunes - now I have nothing. !

    Hello the long beach of dl,

    You need not run Hello service to have iTunes on your computer.

    You can look in the event viewer and see if there are errors on iTunes or the Hello Service.
    By default, the Hello service is started and the startup type is set to automatic.
    The path to the executable file is: C:\Program Files\Bonjour\mDNSResponder.exe. You can search and find this file?

    I find a 3rd party software removal tool and then have it remove all traces of iTunes, including the Bonjour service.
    Use the control panel to uninstall iTunes and software components in the following order:

    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Hello
    6. Application of Apple Support (iTunes 9 or later)

    Download the latest version of iTunes for Windows, and then try to install again.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows Live ID Sign in French Wizard error - "Windows Live ID Sign in Assistant (wlidsvc) Service could not be started. Make sure you have sufficient privileges to start system services. "

    I want to install the Windows Live Id sign in assistant.

    But when its almost done I get this message:

    "Windows Live ID Sign in Assistant (wlidsvc) service could not be started. Make sure you have sufficient privileges to start system services. "and the RETRY and CANCEL buttons.

    Can someone please tell me what to do.

    I appriciate it :)

    Hello

    For more specialist help on issue of Windows Live Sign-in Assistant, you can post your request here:

    Windows Live Forum - http://windowslivehelp.com/

  • Application of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable.

    I get these errors on some Windows 7 machine "registration of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable" ID of the 6 event and event ID 13

    "Registration certificate for Local system failed to enroll for a certificate of computer with application ID N/A dc.contoso.com\contoso-DC-CA (the RPC server is unavailable." 0X800706BA (WIN32: 1722)). »

    other windows XP, Windows 8 and windows machine 7 receive the certificate through auto-enrollment.

    Hi Sam,

    Thanks for posting your query in the Microsoft Community Forums.

    Because the issue is limited to with RPC server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
    I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.
  • Creative cloud does not start starting system even when the option to do so.

    Creative cloud does not start starting system even when the option to do so.

    This is an open forum, not Adobe support... Click below to contact Adobe staff for help

    While the forums are open 24/7 you can't contact Adobe support at any time

    Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • The next (s) starting or starting system could not load: i8042prt

    Model: HP Pavilion Elite e9120y desktop PC

    Msg event log: the following (s) starting or starting system could not load: i8042prt

    What is: i8042prt? How to identify it?

    Details

    Log name: System

    Source: Service Control Manager

    Date: 12/04/2011 09:50:55

    Event ID: 7026

    Task category: no

    Level: error

    Keywords: Classic

    User: n/a

    Computer: Rolland-PC

    Description:

    The next (s) starting or starting system could not load:

    i8042prt

    The event XML:

    http://schemas.Microsoft.com/win/2004/08/events/event">

    7026

    0

    2

    0

    0

    0 x 80000000000000

    136159

    System

    Rolland-PC

    i8042prt

    -

    Please advice

    vylrao

    Well, I don't know about this but I found this: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=321968&prodTypeId=12454&objectID=c01196691

  • Partition recovery system fails after the first start

    I just purchased and receive the laptop next: Pavilion DV7-6C95DX. I went through the Setup program and then created recovery DVD.

    After playing with him for a short period, I decided to try to restore to factory using the recovery partition and F11 State when starting.  This started the Recovery Manager, which (according to his Checklist), reformat the Windows partition, copy the files required and restored the file on the hard drive.  Then it prompted me to restart and complete the process, which I did.

    When starting, it reported that he immediately reported "Windows could not start...". "Status: 0xc000000f... a necessary device inaccessible."

    I pressed Enter to continue and the screen says "choose one to start operating system... "and he only gave me the option"[active EMS] Ramdisk Options"choose it brings back me to the previous screen and so on.

    So, I tried using the recovery media that I made earlier.  Who started Windows and Recovery Manager reported the following: "this computer does not support the system recovery media. You are not able to restore this computer with the media"there was a code below that read"0110-A6X02UAR #ABA - A6X02UA #ABA"

    Apparently, there are two problems - the reecovery partition does not work and the recovery media does not work.  I don't know if they are related, but in all cases, the computer is now unusable. It's less than a week.

    Thanks in advance for any advice to fix this.

    Hi Lance,.

    This error can occur if there are USB devices or media attached to your laptop cards.  If this is the case, remove all connected to your laptop then repeat the recovery process.

    If the above is not relevant, I would try the following to rule out a hardware problem.

    Before you try the following, make sure you can read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

    Assuming that it's just a problem of software with the recovery process, it is a job before right around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to version exact commercial that you would need.

    If you don't have access to a retail disk, you can create an installation disk yourself using another PC - just download the good Disk Image from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    Additional drivers, you may need to find from here.

    If this also fails to install Windows, I would simply return the laptop to the retailer, he bought at and get a replacement while you are still on time where it is an option.

    Kind regards

    DP - K

  • Update the system failed cannot start phone

    I started earlier today to the update of the system and haven't noticed that my battery was really low. It seems that the battery runs out during the update process. Is that a way to every factory reset the phone or install update. I use the phone of Keon

    Looks like that the phone does not receive enough power to the wall socket. I plugged it to my computer USB and it started immediately - on OS and all seems OK

Maybe you are looking for