starting test failed (1 (303) fast quick failed (test 1 (303) fast full failed (305)))

Pc HP Pavilion enterntainment Windows 7

Hello

Error 303 and 305 codes are respectively the disk Self Test short and complete failure and would indicate that hard is defective and must be replaced.

If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - includes the complete model number and Nr laptop - see here for an explanation.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Starting test FAILED - HP ENVY 1191-NR

    Hey guys/girls,

    New to the forum - need some tech support.  I have a HP ENVY3D 1191-NR running Windows 7.  He recently began closing before you start completely.  I ran a Test at startup and for the following results:

    Memory test: FAILED

    FAILURE ID: QE40XL-5GE6G4-XD0141-400103

    PRODUCT ID: YL748UA #ABA

    Memory module

    Starting test: FAILED

    I wonder if that means the RAM of the computer has gone wrong and I need to replace, or else... ?

    Thanks in advance to all.

    Hello:

    Yes, that could indicate a possible memory module failure.

    What I would do is unplug the PC and remove the battery.

    If the laptop has two memory modules, remove one of them and plug the power adapter.

    See if the PC starts and works normally.

    If so, unplug the adapter, remove the other memory module, put in the first one you took, connect the a/c adapter and see what's the result.

    If the PC does not start, you have isolated the bad chip and you can just buy a new one with the same characteristics.

    If the PC is still under warranty, contact HP for a replacement.

  • Meine are displaying wird mit 'start Test '.

    Hallo Liebe community,

    ICH nutze die CC und habe aber nicht alles runergeladen. ICH habe ein Abo und nun shows er mir PS, InDesign Arcobat PRo und mit dem 'Start Test' button a!

    Wie kann ich dieses problem beseitigen.

    Before had ich das schon problem mit meinen implementierten NIK filter in PS, da war die dann, alles zu löschen, alle Dateien und further instruction. DAS ich gemacht habe. Und seit dem includes problem nun auch das mit PS

    Zur Neuinstallation der NIK Filder bin ich noch nicht Australia. ICH denke auch nicht, dass das nun geht ;-)

    Was muss ich tun, damit die Cloud weiss, dass ich zahlender Kunde bin already?

    Gruss

    Jannette

    Jannette, I advise you to contact the Customer Contact where the remote agent on your machine and fix this for you.

  • Why the optimizer ignores Index Fast full Scan when much lower cost?

    Summary (tracking details below) - to improve the performance of a query on more than one table, I created an index on a table that included all the columns referenced in the query. With the new index in place the optimizer is still choosing a full Table Scan on an Index fast full scan. However, by removing the one query tables I reach the point where the optimizer suddenly use the Index Fast Full Scan on this table. And 'Yes', it's a lot cheaper than the full Table Scan it used before. By getting a test case, I was able to get the motion down to 4 tables with the optimizer still ignoring the index and table of 3, it will use the index.

    So why the optimizer not chooses the Index Fast Full Scan, if it is obvious that it is so much cheaper than a full Table Scan? And why the deletion of a table changes how the optimizer - I don't think that there is a problem with the number of join permutations (see below). The application is so simple that I can do, while remaining true to the original SQL application, and it still shows this reversal in the choice of access path. I can run the queries one after another, and he always uses a full Table Scan for the original query and Index fast full scan for the query that is modified with a table less.

    Watching trace 10053 output for the two motions, I can see that for the original query 4 table costs alone way of ACCESS of TABLE UNIQUE section a full Table Scan. But for the modified query with a table less, the table now has a cost for an Index fast full scan also. And the end of the join cost 10053 does not end with a message about exceeding the maximum number of permutations. So why the optimizer does not cost the IFFS for the first query, when it does for the second, nearly identical query?

    This is potentially a problem to do with OUTER joins, but why? The joins between the tables do not change when the single extra table is deleted.

    It's on 10.2.0.5 on Linux (Oracle Enterprise Linux). I did not define special settings I know. I see the same behavior on 10.2.0.4 32-bit on Windows (XP).

    Thank you
    John
    Blog of database Performance

    DETAILS
    I've reproduced the entire scenario via SQL scripts to create and populate the tables against which I can then run the queries. I've deliberately padded table so that the length of the average line of data generated is similar to that of the actual data. In this way the statistics should be similar on the number of blocks and so forth.

    System - uname - a
    Linux mysystem.localdomain 2.6.32-300.25.1.el5uek #1 SMP Tue May 15 19:55:52 EDT 2012 i686 i686 i386 GNU/Linux
    Database - v$ version
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
    PL/SQL Release 10.2.0.5.0 - Production
    CORE    10.2.0.5.0      Production
    TNS for Linux: Version 10.2.0.5.0 - Production
    NLSRTL Version 10.2.0.5.0 - Production
    Original query (complete table below details):
    SELECT 
        episode.episode_id , episode.cross_ref_id , episode.date_required , 
        product.number_required , 
        request.site_id 
    FROM episode 
    LEFT JOIN REQUEST on episode.cross_ref_id = request.cross_ref_id 
         JOIN product ON episode.episode_id = product.episode_id 
    LEFT JOIN product_sub_type ON product.prod_sub_type_id = product_sub_type.prod_sub_type_id 
    WHERE (
            episode.department_id = 2
        and product.status = 'I'
          ) 
    ORDER BY episode.date_required
    ;
    Execution of display_cursor after the execution plan:
    SQL_ID  5ckbvabcmqzw7, child number 0
    -------------------------------------
    SELECT     episode.episode_id , episode.cross_ref_id , episode.date_required ,
    product.number_required ,     request.site_id FROM episode LEFT JOIN REQUEST on
    episode.cross_ref_id = request.cross_ref_id      JOIN product ON episode.episode_id =
    product.episode_id LEFT JOIN product_sub_type ON product.prod_sub_type_id =
    product_sub_type.prod_sub_type_id WHERE (         episode.department_id = 2 and
    product.status = 'I'       ) ORDER BY episode.date_required
    
    Plan hash value: 3976293091
    
    -----------------------------------------------------------------------------------------------------
    | Id  | Operation             | Name                | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
    -----------------------------------------------------------------------------------------------------
    |   0 | SELECT STATEMENT      |                     |       |       |       | 35357 (100)|          |
    |   1 |  SORT ORDER BY        |                     | 33333 |  1920K|  2232K| 35357   (1)| 00:07:05 |
    |   2 |   NESTED LOOPS OUTER  |                     | 33333 |  1920K|       | 34879   (1)| 00:06:59 |
    |*  3 |    HASH JOIN OUTER    |                     | 33333 |  1822K|  1728K| 34878   (1)| 00:06:59 |
    |*  4 |     HASH JOIN         |                     | 33333 |  1334K|       |   894   (1)| 00:00:11 |
    |*  5 |      TABLE ACCESS FULL| PRODUCT             | 33333 |   423K|       |   103   (1)| 00:00:02 |
    |*  6 |      TABLE ACCESS FULL| EPISODE             |   299K|  8198K|       |   788   (1)| 00:00:10 |
    |   7 |     TABLE ACCESS FULL | REQUEST             |  3989K|    57M|       | 28772   (1)| 00:05:46 |
    |*  8 |    INDEX UNIQUE SCAN  | PK_PRODUCT_SUB_TYPE |     1 |     3 |       |  0   (0)|          |
    -----------------------------------------------------------------------------------------------------
    
    Predicate Information (identified by operation id):
    ---------------------------------------------------
       3 - access("EPISODE"."CROSS_REF_ID"="REQUEST"."CROSS_REF_ID")
       4 - access("EPISODE"."EPISODE_ID"="PRODUCT"."EPISODE_ID")
       5 - filter("PRODUCT"."STATUS"='I')
       6 - filter("EPISODE"."DEPARTMENT_ID"=2)
       8 - access("PRODUCT"."PROD_SUB_TYPE_ID"="PRODUCT_SUB_TYPE"."PROD_SUB_TYPE_ID")
    Updated the Query:
    SELECT 
        episode.episode_id , episode.cross_ref_id , episode.date_required , 
        product.number_required , 
        request.site_id 
    FROM episode 
    LEFT JOIN REQUEST on episode.cross_ref_id = request.cross_ref_id 
         JOIN product ON episode.episode_id = product.episode_id 
    WHERE (
            episode.department_id = 2
        and product.status = 'I'
          ) 
    ORDER BY episode.date_required
    ;
    Execution of display_cursor after the execution plan:
    SQL_ID  gbs74rgupupxz, child number 0
    -------------------------------------
    SELECT     episode.episode_id , episode.cross_ref_id , episode.date_required ,
    product.number_required ,     request.site_id FROM episode LEFT JOIN REQUEST on
    episode.cross_ref_id = request.cross_ref_id      JOIN product ON episode.episode_id =
    product.episode_id WHERE (         episode.department_id = 2     and product.status =
    'I'       ) ORDER BY episode.date_required
    
    Plan hash value: 4250628916
    
    ----------------------------------------------------------------------------------------------
    | Id  | Operation              | Name        | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
    ----------------------------------------------------------------------------------------------
    |   0 | SELECT STATEMENT       |             |       |       |       | 10515 (100)|          |
    |   1 |  SORT ORDER BY         |             | 33333 |  1725K|  2112K| 10515   (1)| 00:02:07 |
    |*  2 |   HASH JOIN OUTER      |             | 33333 |  1725K|  1632K| 10077   (1)| 00:02:01 |
    |*  3 |    HASH JOIN           |             | 33333 |  1236K|       |   894   (1)| 00:00:11 |
    |*  4 |     TABLE ACCESS FULL  | PRODUCT     | 33333 |   325K|       |   103   (1)| 00:00:02 |
    |*  5 |     TABLE ACCESS FULL  | EPISODE     |   299K|  8198K|       |   788   (1)| 00:00:10 |
    |   6 |    INDEX FAST FULL SCAN| IX4_REQUEST |  3989K|    57M|       |  3976   (1)| 00:00:48 |
    ----------------------------------------------------------------------------------------------
    
    Predicate Information (identified by operation id):
    ---------------------------------------------------
       2 - access("EPISODE"."CROSS_REF_ID"="REQUEST"."CROSS_REF_ID")
       3 - access("EPISODE"."EPISODE_ID"="PRODUCT"."EPISODE_ID")
       4 - filter("PRODUCT"."STATUS"='I')
       5 - filter("EPISODE"."DEPARTMENT_ID"=2)
    Creating the table and Population:
    1 create tables
    2. load data
    3 create indexes
    4. collection of statistics
    --
    -- Main table
    --
    create table episode (
    episode_id number (*,0),
    department_id number (*,0),
    date_required date,
    cross_ref_id varchar2 (11),
    padding varchar2 (80),
    constraint pk_episode primary key (episode_id)
    ) ;
    --
    -- Product tables
    --
    create table product_type (
    prod_type_id number (*,0),
    code varchar2 (10),
    binary_field number (*,0),
    padding varchar2 (80),
    constraint pk_product_type primary key (prod_type_id)
    ) ;
    --
    create table product_sub_type (
    prod_sub_type_id number (*,0),
    sub_type_name varchar2 (20),
    units varchar2 (20),
    padding varchar2 (80),
    constraint pk_product_sub_type primary key (prod_sub_type_id)
    ) ;
    --
    create table product (
    product_id number (*,0),
    prod_type_id number (*,0),
    prod_sub_type_id number (*,0),
    episode_id number (*,0),
    status varchar2 (1),
    number_required number (*,0),
    padding varchar2 (80),
    constraint pk_product primary key (product_id),
    constraint nn_product_episode check (episode_id is not null) 
    ) ;
    alter table product add constraint fk_product 
    foreign key (episode_id) references episode (episode_id) ;
    alter table product add constraint fk_product_type 
    foreign key (prod_type_id) references product_type (prod_type_id) ;
    alter table product add constraint fk_prod_sub_type
    foreign key (prod_sub_type_id) references product_sub_type (prod_sub_type_id) ;
    --
    -- Requests
    --
    create table request (
    request_id number (*,0),
    department_id number (*,0),
    site_id number (*,0),
    cross_ref_id varchar2 (11),
    padding varchar2 (80),
    padding2 varchar2 (80),
    constraint pk_request primary key (request_id),
    constraint nn_request_department check (department_id is not null),
    constraint nn_request_site_id check (site_id is not null)
    ) ;
    --
    -- Activity & Users
    --
    create table activity (
    activity_id number (*,0),
    user_id number (*,0),
    episode_id number (*,0),
    request_id number (*,0), -- always NULL!
    padding varchar2 (80),
    constraint pk_activity primary key (activity_id)
    ) ;
    alter table activity add constraint fk_activity_episode
    foreign key (episode_id) references episode (episode_id) ;
    alter table activity add constraint fk_activity_request
    foreign key (request_id) references request (request_id) ;
    --
    create table app_users (
    user_id number (*,0),
    user_name varchar2 (20),
    start_date date,
    padding varchar2 (80),
    constraint pk_users primary key (user_id)
    ) ;
    
    prompt Loading episode ...
    --
    insert into episode
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 1000000
           ) 
    select r, 2,
        sysdate + mod (r, 14),
        to_char (r, '0000000000'),
        'ABCDEFGHIJKLMNOPQRSTUVWXYZ' || to_char (r, '000000')
      from generator g
    where g.r <= 300000
    /
    commit ;
    --
    prompt Loading product_type ...
    --
    insert into product_type
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 1000000
           ) 
    select r, 
           to_char (r, '000000000'),
           mod (r, 2),
           'ABCDEFGHIJKLMNOPQRST' || to_char (r, '000000')
      from generator g
    where g.r <= 12
    /
    commit ;
    --
    prompt Loading product_sub_type ...
    --
    insert into product_sub_type
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 1000000
           ) 
    select r, 
           to_char (r, '000000'),
           to_char (mod (r, 3), '000000'),
           'ABCDE' || to_char (r, '000000')
      from generator g
    where g.r <= 15
    /
    commit ;
    --
    prompt Loading product ...
    --
    -- product_id prod_type_id prod_sub_type_id episode_id padding 
    insert into product
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 1000000
           ) 
    select r, mod (r, 12) + 1, mod (r, 15) + 1, mod (r, 300000) + 1,
           decode (mod (r, 3), 0, 'I', 1, 'C', 2, 'X', 'U'),
           dbms_random.value (1, 100), NULL
      from generator g
    where g.r <= 100000
    /
    commit ;
    --
    prompt Loading request ...
    --
    -- request_id department_id site_id cross_ref_id varchar2 (11) padding 
    insert into request
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 10000000
           ) 
    select r, mod (r, 4) + 1, 1, to_char (r, '0000000000'),
    'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz01234567890123456789' || to_char (r, '000000'),
    'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789012345678' || to_char (r, '000000')
      from generator g
    where g.r <= 4000000
    /
    commit ;
    --
    prompt Loading activity ...
    --
    -- activity activity_id user_id episode_id request_id (NULL) padding 
    insert into activity
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 10000000
           ) 
    select r, mod (r, 50) + 1, mod (r, 300000) + 1, NULL, NULL
      from generator g
    where g.r <= 100000
    /
    commit ;
    --
    prompt Loading app_users ...
    --
    -- app_users user_id user_name start_date padding 
    insert into app_users
    with generator as 
    (select rownum r
              from (select rownum r from dual connect by rownum <= 1000) a,
                   (select rownum r from dual connect by rownum <= 1000) b,
                   (select rownum r from dual connect by rownum <= 1000) c
             where rownum <= 10000000
           ) 
    select r, 
           'User_' || to_char (r, '000000'),
           sysdate - mod (r, 30),
           'ABCDEFGHIJKLMNOPQRSTUVWXYZ' || to_char (r, '000000')
      from generator g
    where g.r <= 1000
    /
    commit ;
    --
    
    prompt Episode (1)
    create index ix1_episode_cross_ref on episode (cross_ref_id) ;
    --
    prompt Product (2)
    create index ix1_product_episode on product (episode_id) ;
    create index ix2_product_type on product (prod_type_id) ;
    --
    prompt Request (4)
    create index ix1_request_site on request (site_id) ;
    create index ix2_request_dept on request (department_id) ;
    create index ix3_request_cross_ref on request (cross_ref_id) ;
    -- The extra index on the referenced columns!!
    create index ix4_request on request (cross_ref_id, site_id) ;
    --
    prompt Activity (2)
    create index ix1_activity_episode on activity (episode_id) ;
    create index ix2_activity_request on activity (request_id) ;
    --
    prompt Users (1)
    create unique index ix1_users_name on app_users (user_name) ;
    --
    prompt Gather statistics on schema ...
    --
    exec dbms_stats.gather_schema_stats ('JB')
    10053 sections - original query
    ***************************************
    SINGLE TABLE ACCESS PATH
      -----------------------------------------
      BEGIN Single Table Cardinality Estimation
      -----------------------------------------
      Table: REQUEST  Alias: REQUEST
        Card: Original: 3994236  Rounded: 3994236  Computed: 3994236.00  Non Adjusted: 3994236.00
      -----------------------------------------
      END   Single Table Cardinality Estimation
      -----------------------------------------
      Access Path: TableScan
        Cost:  28806.24  Resp: 28806.24  Degree: 0
          Cost_io: 28738.00  Cost_cpu: 1594402830
          Resp_io: 28738.00  Resp_cpu: 1594402830
    ******** Begin index join costing ********
      ****** trying bitmap/domain indexes ******
      Access Path: index (FullScan)
        Index: PK_REQUEST
        resc_io: 7865.00  resc_cpu: 855378926
        ix_sel: 1  ix_sel_with_filters: 1
        Cost: 7901.61  Resp: 7901.61  Degree: 0
      Access Path: index (FullScan)
        Index: PK_REQUEST
        resc_io: 7865.00  resc_cpu: 855378926
        ix_sel: 1  ix_sel_with_filters: 1
        Cost: 7901.61  Resp: 7901.61  Degree: 0
      ****** finished trying bitmap/domain indexes ******
    ******** End index join costing ********
      Best:: AccessPath: TableScan
             Cost: 28806.24  Degree: 1  Resp: 28806.24  Card: 3994236.00  Bytes: 0
    ***************************************
    10053 - updated the Query
    ***************************************
    SINGLE TABLE ACCESS PATH
      -----------------------------------------
      BEGIN Single Table Cardinality Estimation
      -----------------------------------------
      Table: REQUEST  Alias: REQUEST
        Card: Original: 3994236  Rounded: 3994236  Computed: 3994236.00  Non Adjusted: 3994236.00
      -----------------------------------------
      END   Single Table Cardinality Estimation
      -----------------------------------------
      Access Path: TableScan
        Cost:  28806.24  Resp: 28806.24  Degree: 0
          Cost_io: 28738.00  Cost_cpu: 1594402830
          Resp_io: 28738.00  Resp_cpu: 1594402830
      Access Path: index (index (FFS))
        Index: IX4_REQUEST
        resc_io: 3927.00  resc_cpu: 583211030
        ix_sel: 0.0000e+00  ix_sel_with_filters: 1
      Access Path: index (FFS)
        Cost:  3951.96  Resp: 3951.96  Degree: 1
          Cost_io: 3927.00  Cost_cpu: 583211030
          Resp_io: 3927.00  Resp_cpu: 583211030
      Access Path: index (FullScan)
        Index: IX4_REQUEST
        resc_io: 14495.00  resc_cpu: 903225273
        ix_sel: 1  ix_sel_with_filters: 1
        Cost: 14533.66  Resp: 14533.66  Degree: 1
    ******** Begin index join costing ********
      ****** trying bitmap/domain indexes ******
      Access Path: index (FullScan)
        Index: IX4_REQUEST
        resc_io: 14495.00  resc_cpu: 903225273
        ix_sel: 1  ix_sel_with_filters: 1
        Cost: 14533.66  Resp: 14533.66  Degree: 0
      Access Path: index (FullScan)
        Index: IX4_REQUEST
        resc_io: 14495.00  resc_cpu: 903225273
        ix_sel: 1  ix_sel_with_filters: 1
        Cost: 14533.66  Resp: 14533.66  Degree: 0
      ****** finished trying bitmap/domain indexes ******
    ******** End index join costing ********
      Best:: AccessPath: IndexFFS  Index: IX4_REQUEST
             Cost: 3951.96  Degree: 1  Resp: 3951.96  Card: 3994236.00  Bytes: 0
    ***************************************

    I mentioned that it is a bug related to the ANSI SQL standard and transformation probably.

    As suggested/asked in my first reply:
    1. If you use a no_query_transformation then you should find that you get the use of the index (although not in the plan you would expect)
    2. If you use the traditional Oracle syntax, then you should not have the same problem.

  • When Oracle make Index Fast full Scan?

    Hi all

    In this case, Oracle index full scan. Please give the solution with at least two example.

    Thank you

    Oops,

    Spleen it was INDEX FAST FULL SCAN. Then index must be greater:

    SQL > create table tbl in select * from dba_objects;

    Table created.

    SQL > alter table tbl
    2 edit object_name not null;

    Modified table.

    SQL > create index tbl_idx1 on tbl (object_name);

    The index is created.

    SQL > explain the plan for
    2. Select object_name in tbl;

    He explained.

    SQL > select * from table (dbms_xplan.display);

    PLAN_TABLE_OUTPUT
    ----------------------------------------------------------------------------------
    Hash value of plan: 2675010997

    ---------------------------------------------------------------------------------
    | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
    ---------------------------------------------------------------------------------
    |   0 | SELECT STATEMENT |          | 69022 |  4448K |   109 (1) | 00:00:02 |
    |   1.  FULL RESTRICTED INDEX SCAN FAST | TBL_IDX1 | 69022 |  4448K |   109 (1) | 00:00:02 |
    ---------------------------------------------------------------------------------

    Note
    -----

    PLAN_TABLE_OUTPUT
    ----------------------------------------------------------------------------------
    -dynamic sample used for this survey (level = 2)

    12 selected lines.

    SQL >

    SY.

  • Starting test failed

    I have a HP Pavilion g4-1125DX with Windows 7. A few days ago while I was downloading the files that it hung. I was able to move the cursor, but could not close the browser window, nor could I stop him. I push the power button down for a few seconds for a hard stop, when I tried to connect the system to the top it wouldn't boot Windows. He gave me several options to save and I tried to perform a restore of Windows, which did not work, tried to start it in safe mode and still have the same error, I gave up trying to save my files that I have most of them supported anyway if I tried to perform a full recovery of the system to the factory settings. He went through the process of recovery worldwide and says that it is successful. When I tried to reboot after recovery, he hung up on the trunk again. He didn't try to make me the same recovery menu. He just hung. I tried another hard stop and restart to get to the HP Advanced System Diagnostics and tried the start-up Test and he FAILED.

    He gave me the FAILURE ID: M4H27W-5NR5SC-MFPV5G-60UQ03.  I don't know what to do with this information. I need help. I just want to get this thing back operational.

    Thank you.

    Hi, LBG,.

    An error 303 is a failure of the short drive self-test and definetely suggested that tough is a failure.

    As your laptop is still under warranty, contact HP by simply using the relevant link below and make arrangements for the disk needs to be replaced.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • starting test has fail?

    Windows me closed down to install updates. Now I have a start up test failed guest on my screen and I can't move forward. What can I do to fix the problem?

    Hello

    301 error code is a Smart failure and would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • HP probook 4520 s: start test failed

    Hello, could you help me with the error that I have? Because I can't install windows.

    Hello

    Product number? --
    http://support.HP.com/us-en/document/c00033108

    Which indicates a failing or hard drive and you need to replace the hard disk drive.

    I suggest that to do fast & Extensive tests in the system diagnostics hard drive by typing F2 away as soon as you turn on laptop, to be confirmed. If you get the ID of failure 24 characters or other error codes, it is time to replace the HARD drive.

    If you are in warranty, HP may send you a free of cost.
    http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&LC=en

    Otherwise, you could buy any laptop brand to retail SATA HDD at least the same capacity as the one supplied with your laptop. (Eg. 500 GB, 750 GB)

    If you do not have a recovery until now media, must order them for resettlement to the factory settings.

    Contact HP:
    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    Concerning

    Visruth

  • My HP dv6t starting test failed. I can't start windows 7 USB/dvd-drive

    Internet did not work and other things on hp dv6t laptop my son with windows 7 I did a system of resettlement.  It worked for a day and now can get right after loading windows files and then a blue screen with the rays of the Sun.  I can't do anything.  I tried to do a start-up test and it said that the memory test and a smart test passed but the shore that DST has failed.  What does that mean?

    DST-short is the hard drive, he has failed the test, replace the hard drive.

  • Disk HARD - short test error start DST FAILED

    Hello!

    I have a problem with my Inspiron 8600 (don't model no PP02X) that started 2 days ago... hard drive appears to be faulty

    It started with the PC freeze, well, I just restarted and after have connected you on the deskop screen came, then it just froze again... and again... and again...

    (discovered an old topic about the same problem here: http://delltalk.us.dell.com/supportforums/board/message?board.id=insp_harddrive&message.id=45306 )

    I ran the F12 diagnostics, he said:

    -Start the test short dst.
    test results: fail
    error code: 1000-0146
    MSG: Unit 0: dst log contains previous error

    and when you run intensive scrutiny with the CD of diagnosis CRITERION of the READ and CHECK it seem to fail (error code 0F00:1344 and 0F00:1 A 44)

    That said this is no longer the original HARD disk, I replaced it with a bigger and a half year ago. I have a box external 2.5 "and when I connect with my other PC HARD drive, it seems, can be accessed without any problem... so can't quite see that HARD drive is 'destroyed '.

    Help, please

    Message edited by HighVoltageHerbie on 04/01/2008 09:54

  • HP pavilion dv7 starts, which has failed to start test. ID: RK47G1-6AH6LK-9C5V7A-60TP03

    I have the computer hp laptop pavilion dv7 4150er, running on windows 7 64 bit. There no short DST when I ran boot and run in trials with the same ID RK47G1-6AH6LK-9C5V7A-60TP03 with "hard disk 1" in the description. Any ideas what's past? See you soon...

    Hello

    Please check the following:

    http://www.WikiHow.com/recover-a-dead-hard-disk

    Good luck.

  • HP ENVY laptop - 15-k101nx: HP envy 15 does not start after failing to set up

    Failed to configure Windows (it took so long and shows no percentage) so I turned off my laptop, removed and unremoved battery and turned on it. The problem is it does not start and the screen is all black with little light on it.

    What I've done so far:

    -J' tried to restore the BIOS by following the instructions here say: http://support.hp.com/ee-en/document/c02693833 ; However, I still have the same problem after restoring the BIOS.

    -J' also tried a few hardware diagnostic test, he failed in the test of ' disk hard short dst check "and gave me chess and product IDS.
    -He also failed in the Startup Repair tool

    My laptop is still covered with warranty accdg here 'http://h10025.www1.hp.com/ewfrf/wc/weInput?lc=en&dlc=en&cc=us&tmp_weCountry=&tmp_weSerial=&tmp_wePro... '. but the characters upon receipt of my laptop is already melted aways since they are written on a thermal paper.

    BTW, I can always open the command prompt and the research on the C: drive and see my files, but don't know what to do whenever I used the chkdisk command, it asks me to do things I'm not familiar with.  I just heard that the chkdisk command solves the problem temporarily.

    What do you think are the alternatives and solutions to the problem of my laptop?

    Yes the hard drive needs to be replaced. Just call support and they will have it replaced for you under warranty.

  • Start-up failed, cannot fix, no restart of drives available

    PC HP with Vista. Will not start. Installed recovery options failed and no reboot disk available. All downloadable options which can be copied and used in the option "reboot with the disk?

    Hello

    I suggest that get you in touch with HP for better help.

    Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • starting system failed at checkpoint [USBd]

    Fact a reboot after upgrade to Office 2000 to 2003 and the screen froze with a blinking cursor in the dark.

    F2, F11 or F12 does nothing.

    Ctrl + alt + tab produces a momentary vision of the start screen and changes to a black screen with the message: «...» "Previous attempts to start this system have failed at checkpoint [USBd]... »

    I need help to get back on the pc. (Dell Dimension 2400 Series, version of the Bios A02), Win XP.

    Hi Befudd,

    We are happy to know that your computer works as expected. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • Waterfalls of error on the camera on the Blackberry emulator: starting viewfinder failed

    I try to open a Blackberry device stunts 10.2
    import bb.cascades.multimedia 1.0
    import bb.multimedia 1.0
    import bb.cascades 1.2
    import bb.system 1.2
    {Page}
    title bar: title {} bar
    Title: "QML camera Sample App.
    }
    content: camera}
    ID: qmlCameraObj
    Boolean photoBeingTaken property
    Notecard: {}
    If (photoBeingTaken == false) {}
    photoBeingTaken = true;
    qmlCameraObj.capturePhoto ();
    }
    }
    onCameraOpened: {}
    qmlCameraObj.startViewfinder ();
    }
    onCameraOpenFailed: {}
    Console.log ("camera open failed")
    }
    onViewfinderStarted: {}
    photoBeingTaken = false;
    }
    onViewfinderStartFailed: {}
    Console.log ("ErrorType" + error)
    Console.log ("viewfinder failed")
    }
    onPhotoCaptureFailed: {}
    Console.log ("picture capture failed")
    photoBeingTaken = false;
    }
    onPhotoSaveFailed: {}
    Console.log ("picture save failed")
    photoBeingTaken = false;
    }
    onPhotoSaved: {}
    photoBeingTaken = false;
    }
    onCreationCompleted: {}
    qmlCameraObj.open (CameraUnit.Front)
    }
    }
    }

    I also add appropriate in the .pro and these libraries line at my bar - descriptor.xml

    run_native
    use_camera
    access_shared

    But when I run this code on the emulator, I got in the console: ErrorType 2 viewfinder has failed. If anyone has any idea why the viewfinder does not start, it will be useful.

    You can try on 10.2.1?

    If this does not work, please connect has a bug about the developer Issue Tracker: SAID

Maybe you are looking for