Starting with Ubuntu Remix on Toshiba NB100 problems
Today, I tried to use the Update Manager to install several updates.
During installation, the device froze.
Now start only takes me to the start page of Ubuntu with the logo and a progress bar is empty.
If I go to the Terminal, I have the following script
BusyBox v1.1.3 (Debian 1:1.1.3 - 5 Ubuntu12) shell (ash) integrated
Enter 'help' for a list of built-in commands.
I have no idea how to proceed. Is there a command that I can use for commissioning successfully or do I need to use the recovery CD?
I'm a newbie to Linux.
I think that you should just grab the laptop because it's the easiest way to solve this problem starting Ubuntu.
Other workarounds would be too difficult and would take as long as a simple recovery.
Recovery if the NB100. The procedure should t take long.
Check it out!
Can I change hard drive with an SSD in Toshiba NB100?
The hard drive in this model is the same size as SSD 2.5 drive "?
As far as I know the laptop supports the disk HARD 2.5 SATA.
I think you could use a SATA SSD drive. Usually some SSDS require the firmware update but this should be provided by the manufacturers of SSD drives.
I installed ubuntu remix on my Toshiba Satelite 110 that I just bought, but the wifi card gives me a lot of trouble. I can actually see it in the Bios. I can turn it works, but it tests not at all. It is the output of "lspci - tv. As you can see it the wifi card is not listed. So what about that, I have two questions
-do you have someone of you guys met any question like that on this model? If so, how to solve it?
-I believe that as a last resort, I'll install another wifi card in my new machine. Thos map I want to install but I wonder if you know guys of any restrictions on netbooks that I should be aware off the coast? So, feel free to comment on the model of the card, I chose and advised me...
Compex iWAVEPORT WLM200NX dual band 11N - industrial quality - high 20dbm power (100 MW), 2R/2 t Wireless Mini PCI Atheros AR9002 (AR9220 chipset) WiFi adapter up to 300Mbps 802.11abgn -.
-[0000:00]-+-00.0 Intel Corporation Mobile 4 Series Chipset Memory Controller Hub
+-02,0 Intel Corporation Mobile 4 Series Chipset graphics controller integrated
+-02.1 Intel Mobile 4 Series Chipset graphics controller integrated Corporation
+-1a.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4
+-1a.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5
+-1a.2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6
+-1a.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI #2 controller
+-1b.0 Intel Corporation 82801I (ICH9 Family) HD Audio Controller
+ - 1c.0-[0000:02] -.
+ - 1c.4-[0000:07]-00.0 Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet adapt
+ - 1c.5-[0000:08]-00.0 Realtek Semiconductor Co., Ltd. peripheral 8172
+-1d.0 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2
+-1 d 2 Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801I (ICH9 Family) USB2 EHCI #1 controller
+ - 1e.0-[0000:0] -.
+-1f.0 Corporation Intel ICH9M-E LPC Interface Controller
+-1f.2 Corporation Intel ICH9M-E/M SATA AHCI Controller
\-1F.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller
Are you sure that the 110 Satellite supports a wireless network card?
I doubt that this good old classic is equipped with an internal WiFi card!
I found this Satellite 110 card and the wireless network adapter is not there!
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=10737696 55 & rpn = & modelFilter = 110CT & SelCategorie = 3 & selFamily = 1073768663
Whenever I start my laptop I get a "RunDLL" window with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll the specified module could not be found." How can I solve the problem and stop this message from appearing?original title: RunDLL
Chooses a different path by doing a system restore. For me, it was a less complex approach. In any case, thanks for your response.
I recently acquired a new Qosmio F60 and a new port replicator Dynadock U. problem, but it will not start upward unless I disconnect the Dynadock by unplugging the USB cable from the laptop. I downloaded the latest drivers for the F60 and the Dynadock from Toshiba site without change to the problem.
Also, the entire system in slow frustrating execution of orders despite the fact that the system's processor i7-based.
I am running Windows Home Premium 64 bit version with Norton Security and have no innstalled unauthorized or unusual software.
All other devices are connected to the Dynadock port replicator? Perhaps the external device is causing the Windows 7 startup problem
Have you installed latest version of BIOS of Toshiba? As far as I know the new version came out a few days ago
Check this box!
I am running Vista Home Edition on a Toshiba Satellite. Apparently I was infected by a virus because Windows Security Essentials flashed messages on my screen about detected viruses and he tried to quarantine. Unfortunately, I get a message that says something about Windows encounters a critical error and will be shut down for a minute. Also, my computer does not seem to hold a charge (battery) suddenly and flashed a message on the power supply or battery manager having a problem. I started mode without failure, and while it may take a minute for the Windows message while meeting a critical error to appear, he appears again and then stops for a minute. I can't get the computer to stay long enough to do anything. I even tried to try and disable the automatic stops when Windows encounters a problem in the same Mode window safe mode (F8), but it will still disconnect me and close. I tried trying to get Microsoft Security Essentials to run a scan but the critical error that meets Windows continues to turn off the computer before it can go very far. I'm puzzled and not particularly compyter savy. There, can someone help me?
Because it is a Toshiba product, I suggest that you ask them how to reinstall Vista.
Or try their Forums:
At Toshiba, we could buy a recovery disc but it will cost money; and you don't know if it will work.
Or borrow a DVD of Microsoft Vista, don't buy Toshiba Recovery DVD.
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
See you soon.
Hello! I have a problem with your laptop QosmiF30.
When download and work in Ubuntu 7.10 I have a happening spontaneous sealing down keys.
Help solve the problem.
Is your keyboard software problem or hardware related?
As the title says I have problems with my laptop I'm unable to initialize the device with a USB key with Ubuntu.
Any suggestions to solve my problem?
See you soon!
The BIOS is certainly able to boot from a USB flash drive.
You need to connect the USB to the computer, then turn on the unit and press F12
Now you should be able to see the USB flash drive like device starting.
Select this option and press ENTER.
That s it
PS: of course, we must make sure that Linux bootable flash drive.
I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.
Is anyone having problems with the new BIOS?
Should I upgrade or leave intact 3.20?
I don't find any evidence of trouble with 3,20.
Why upgrade BIOS if everything is OK?
In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that
Hello! I just bought a Toshiba Satellite R830-146 with the following general specifications:
OS: Windows 7 Home Premium
CPU: Intel i5 - 24010M
RAM: 4 GB DDR II
HARD DRIVE 640 GB
I had install/configure these days.
In addition to the original, Aministrator account, I first worked with what turn on the machine and the installation/configuration of starting the process, I had to create another account to user with administrator privileges. The reason? Because the settings of Internet Explorer 9 in the original Admin account were somehow gone corrupt: some web pages that I absolutely have to work with because of professional reasons cannot be properly charged more, and these web pages are only compatible with Internet Explorer, not any other browser, Mozilla or anything like that. After several hoyrs work trying to solve this issue, I couldn't find a way to solve it.
So I created a second administrator. User account (with the intention to delete the original Admin account if it worked OK); and in the admin again. account 9 IE works fine in any web page but I this is my problem with the Toshiba application online product Info begins.
Namely: Toshiba OPI app doesn't work at all in the admin again. user account, even if it worked perfectly in the original account of amin - and it still doesn't work (I haven't dared delete the admin account of origin). When it is running in the new account admin, Toshiba OPI shows only an error message. I tried with UN-install the utility, then put it back in the admin again. account - no result, problem still there and Toshiba OPI still works fine in the oldest account where the IE 9 settings are corrupt, but false in the new, where everything works fine.
So, why don't I just uninstall Toshiba OPI, delete the older admin account and forget all about?, you ask. Well, because among all the specific software Toshiba provided with my machine, this seems to be the one and only piece of software that maintains a current alert on, locates, downloads and installs the necessary drivers, BIOS updates and other. Software specific to the computer of the machine it does basically what Windows Update performs the operating sistem. Like many other users, I usually end up uninstalling the pre-installed software, specific LABELTEX, most of the machines that I buy, because it most of it isn't useful. But I still like to preserve the piece of software specific LABELTEX update which is updated regular with LABELTEX criticism or specific patches to the computer/model instead of having to regularly visit Toshiba support & updates page to see if it is something urgent. And this piece of software in question seems to be Toshiba OPI utility, in this case.
So I wonder if anyone has a diagnosis of why this does not work in all the admin. accounts (and no, the problem isn't that I do run the program with two admin accounts connected and active I already checked that), and how could I solve apart from uninstalling the Toshiba OPI and oblivion, that would be very easy , but I would not do.
Thank you very much in advance for your help.
In the last years I ve changed 3 portable Toshiba and the first thing I did was to remove the OPI and several other specific applications of Toshiba. Why? All of them start with Windows, slow start-up of the laptop, run in the background for nothing.
My experience Toshiba doesn't offer new things every day, so in general you can use OPI every two months to check whether or not something is offered again. You can do this when you start your laptop with the original admin account.
You know, that these questions are not easy to explain. Toshiba has tested pre-installed software and functionality with the original account. Who knows what is corrupt with your admin account and what have you done in the past.
In my opinion, if you want to keep your configuration, stop OPI to run with your extra account and be happy. Each connection of two months using original admin account and check for updates.
I appeal to your jurisdiction after a first contact with the Toshiba support on the phone.
My problem is the following: your computer Satellite A100-662 begins at random, sometimes it starts the first time, and other times it starts only partially sighted power and ignition in market, drive hard s ' lighter than 1 second, the fan runs but the screen remains black.
To start, I tried several things, I had read on the Internet: removed / delivered the battery; power supply only. removed / delivered the same RAM and hard drive.
The Toshiba support me make an initialization of food and a BIOS upgrade. I also set the fan but no improvement!
Because I noticed something by chance: the computer does not start, I tapped on the lower right corner of the computer, and it started but not on the screen. I turned off the computer, and then I'm turned again... He has started!
What do you think?
first of all: THIS IS a USER FORUM
That means, Toshiba bed tie this messages or give any kind of support. So, please Don t think that one of Toshiba will call you the next day and give you press your problem. Be prepared to discuss with other users to solve your problem and get some knowledge from other users here autour.
Regarding your problem:
I think you have some hardware problem that must be fixed by a partner certified. I guess that an electronic part of the motherboard of your computer does not work correctly and from causes of this boot.
In your case, I would follow this [LINK: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], find the nearest authorized service partner in your country and ask them a health check of material.
That's all, good luck...
Whenever I run firefox on my Mac after that I installed the latest update, each session starts with a problem window indicating: Excuses voor het ongemak. Firefox problems bij het van uw add en tabbladen recovering lapses. said wordt meestal een both geopende door quality page.
The pages I used are different pages each time. I use Firefox for about 6 years now, never had any problems...
I tried evertything: re - install, check plugins, cool - start, close the tabs, change Aperture site preference, clear cookies and history etc. Hours and hours... but the problem is repeated and it's annoying.
There will be a new version with bug fixes?
Thank you! Glad to know that the solution to the problem momentarily.
It seems to work so far!
Nightly Ubuntu connects not with Ubuntu 11.10 3.0.0 - 17-generic, but firefox 11.0 kernel is still working in the same kernel version (the source of the problem since 3.0.0 - 16A gave no problem)
Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel
11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem
Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).
You may also be able to find useful info here.
I've read other discussions about similar issues, but I'm not having the same problem as most of the people. When Windows starts my wireless light stays orange/orange, even if it is on. However, I can turn off my wireless manually and then turn it to in turn blue and knit. It is still listed in devices when I start my computer.
The strange thing is when I restart my computer, Windows starts with the wireless work. However, the problem occurs only when the laptop is completely off and turned on and then later. I emailed HP Technical Support about the problem, but the steps that they have me pass by did not help.
This may sound silly but often leave when people open their notebooks they are accidentally dragging the wireless switch.
This is not the case with you is?
I lost the sticker with the license number Windows XP for Toshiba NB100. I have an invoice.
How can I recover the license number?
Licensed refused to support this topic.
You can't get the license number.
First the sticker on the bottom of the unit has been a serial OEM key. This key cannot be used and would not work under Win XP installed system costs.
The point is that Toshiba image which was preinstalled on this laptop has already been activated, which means that this key has been useless.
I assume that you have not created a disk recovery Toshiba (or flash USB stick) in the past? Right?
These records would be reinstall the image of Toshiba containing the active Win XP system.
Well, usually it of possible to order this disc [here | http://backupmedia.toshiba.eu/landing.aspx] but I think that would be more because of the age of the laptop.
Solution: you have to buy Win XP with valid serial key.
Maybe you are looking for
Safari does not open due to many redirects. How can I fix it?
I have a Netgear router with enabled DoS protection and in the newspapers that I read: [DoS Attack: Ascend Kill] from source: 126.96.36.199, port 123, Wednesday, January 06, 2016 15:50:17[DoS Attack: Ascend Kill] from source: 188.8.131.52, port 123,
Hello. I try to do a factory reset on my computer. The only thing I have a problem with is to choose what backup device to use before I launch the zero setting. Here is a screenshot of my options. Can someone tell me please that one to use so I can r
Product: HP Envy 17 3D 11-1195ea XG554AV I bought this laptop in the United States, early last year. Be an Irish resident, I would like to change the keyboard of an Irish or UK. The number of component for the keyboard is 603791-031. Where can I buy
I recently did some 'clean up' things using Glary Utilities like registry cleaner, duplicate file, foam registry defragmentation, defragmentation of the C drive. I have 4 entered into Outlook email addresses. 3 are POP, it's an Exchange. My other Off