starts automatically after a power failure

Similar Questions

• The value of VM to restart automatically after a power failure

  Hello world

  I'm under vSphere Client 4.1.0 and VMware ESXi 4.1.0. I'm having a problem to find my vSphere client where to change the VM to restart automatically after a power failure. When we have a failure someone must manually start the virtual machine. I want that it automatically starts up on its own. Where can I change this to? I looked around the client with little success...

  Thank you for your time and help

  on the ESXi host go to the tab Configuration - setting Virtual Machine power - properties (top right of the customer)

• Virtual MACHINE starts automatically after a power outage of the entire site?

  Hello

  We use ESXi 5.5.

  If there is a power for the datacenter failure, ESXi hosts must be restarted when power is resumed.

  We wonder if VMs will be launched automatically to the top?   If not, this means that we must allow the "starting the Virtual Machine / stop option.

  If we put a number of virtual machines in "automatically start", such as VM1, VM2, VM3 on ESXi Server one, VM4 VM5 ESXi Server b.   Virtual machines are migrated between ESXi servers and how they can keep the boot sequence?

  Your opinion is requested.

  Dear Tony,

  I ask you to create a vApp and configure accordingly on your vCenter boot order.

  https://pubs.VMware.com/vSphere-55/index.jsp#com.VMware.vSphere.vm_admin.doc/GUID-0FAB05D4-22F7-4665-B42A-0FA4B360B398.html

  See you soon,.

  Billon Manogaran

• No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

  The latest patch to update this system was .net framework 4

  This behavior has occurred on several machines after a power failure in our factory caused all systems restart.

  I have run chkdsk

  I ran sfc

  SafeMode internet works fine.

  Clean boot does not solve the problem.

  Cannot remove .net framework 4 because I can't get windows installation service to work properly.

  X red on the connection in normal mode

  I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.

  I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.

  System Restore was successful, but had no bearing on the issue. Here's the solution that worked.

  Safe Mode boot

  on computers that are running Windows live onecar I ran as administrator onecare removal tool

  Remove the Adobe Flash 10 utility

  Open msconfig and services.msc

  enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install

  Enable

  BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.

  Restart the machine.

  I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.

  Remove all instances of Java (cannot be done in safe mode)

  Reinstall Java and flash player from their respective Web sites

  I installed Microsoft Security Essentials www.microsoft.com/security_essentials

  Run windows update and install the updates.

  run msconfig and select normal startup

  Restart and ensure normal operation.

  It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.

• This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure

  I got a 5.1 cluster with some problems HA.

  a few virtual machines are showing this

  This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.

  When I try to reconfigure HA on the host. It times out and fails.

  any idea?

  Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected

• This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure

  ESXI 4.0 3 running virtual machines.

  600 GB HDD / 8 Gigas of RAM / Xenon QuadCore.

  ESXI 5.5 (I had two).

  Using Raid 01 (1 TB)

  RAM of 64 Gbite

  Hearts CoreI5 Xenon proceso.

  VCenter server deployment with Vmware Storage appliance.

  Problem:

  I've had enough material resources, in fact, I had twice the disk space and memory to four times more in the reception of news

  When migrating virtual machines in ESXI 4 server and get Vcentener turn it on the message "this VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.  "

  I do not understand because the servers have resources, I can't find what is wrong.

  Should I use another method of migration?

  Once that you have migrated, can solve this problem without re-migration of computers?

  I found this post, but it's no imformation. This VM could not become vSphere protected HA and HA cannot attempt to restart after failure of.

  Thank you

  See:

  Re: This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.

• My computer has no validation after a power failure

  I had a power failure while my computer was on when power is relit, the computer starts normally, except I now get a black screen and the message "you may be victim of software counterfeiting.  This copy of windows has failed the genuine Windows validation"when I click on the GET valid, he returns with"enter a genuine Windows product key. The product key used to activate Windows on your PC is a volume license key that has been blocked by Microsoft. "I want to know is how they came up with that, when I have a license key individual stuck on the side of my computer with hologram, both on the sticker on the drive.  When I click on fix it, the only options I get are to buy windows 7.  My XP Pro system worked very well during the five years I've owned what he and I did not intend to upgrade to windows 7, Vista that came on my laptop left a bitter taste in my mouth.

  Try this:

  http://support.Microsoft.com/kb/306084

• Error in the application of Muse after startup after a power failure

  Hello

  I had a power failure and after I got the following error:

  The msg box is modal, and the ok button does not work, then the application is frozen.

  

  I tried to re - install the application twice, but without a bit of luck

  Advice would be appreciated.

  Brdgs

  E Bjarn

  Hi Bjarn

  Have you tried to create a new site, and see if it crashes too when opening. If it works fine, your file may be damaged .muse.  In addition, where was located, as the network drive or local file drive?

  Please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• Startup after a power failure

  Hi people.

  I want the apps that were open when occurs a power failure would not open during the recovery.

  But I can't find where to put in place only.

  Any idea?

  In the Apple Menu, select "restart." A window will appear as shown below. Clear to re - open the windows when you log in. You can now cancel the reboot, unless you want to check that the system works as you would when you restart.

  

• Unable to connect to the internet (using a wired connection or wireless) after a power failure, error "the cable network is disconnected"

  After a power outage, I can not connect wireless (cannot connect even with the wired ethernet cable); get message "network cable is unplugged", which is not.  The cable modem work properly in wireless mode with two other computers.  System to an earlier date of reload and change the cable has not solved the problem.  Running Windows XP.  Any suggestions?

  Hello

  I suggest to follow the steps provided and check if it helps.

  How to troubleshoot the following message appears in Windows XP: "a network cable is unplugged": http://support.microsoft.com/kb/910389

  Hope this information is useful.

• video playback starts automatically after idle time

  Original title: video start automatically on my computer make it disappear!

  Just today, when my computer is sitting it will start playing a video of Yahoo.  My son used my computer and I think that he has downloaded something that makes this place.  How can I find what causes this automatic video play and make them disappear?

  Hello

  You can check the download location and to see all the videos or ad is downloaded from the website of Yahoo. If so, you can try to delete these files to download and check out.

  You can also try to delete the temporary Internet files folder and check.

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• Slow start, "Frozen Desktop", MS C++ Runtime Library - all after a power failure fast

  Our House had a short cut (2 seconds), and immediately after that the computer has restarted, the computer was a moment very unusually long to restart. When its many programs spinning if clicked on, and in some cases, the computer would freeze (for example, I need to click on "start" and it would freeze on the screen) or get the runtime error above (device trying to open firefox). And 'My Computer' is simply not open. I tried to restart in 'safe mode' but that did not work or the other. The computer is managed by a surge protector and have us get out before without any problem, so I hope it didn't fry the computer completely. Firefox and Norton won't work (they turn). "Freezes" the taskbar and the start menu opens, but with no icons (view through the desktop). 'My computer' opens but then charge (green bar through the movements of the top of the page), but then will 'freeze '. I don't seem to be able to start in "Safe Mode", but it will try again.

  Thank you for your help. Unfortunately, the problem was not resolved. The computer still load at a snails pace (close to 40 minutes) and programs spin when I try to open at least 60 seconds, or that they no longer answer. Now, I hear a real hard drive clicking sound, so I guess that some how the hard drive is physically damaged (if I have a surge protector - so I don't know how it happened). I plan to completely reload Vista (wipe everything) as a last ditch effort, but I'm guessing that won't matter either, like her that perhaps the HD is made.

• How to make the virtual machine starts automatically after power is declining for all ESX host?

  We meet just power down and lost electricity ESX host.

  When we start the ESX host, we can on each individual virtual machine.

  Y at - it a setting that we can put in place for these VMs critics may start se?

  Your opinion is requested.

  Thanks for your advice. He agrees with your saying that the start / stop sems to be buggy.

  It's only disable it every time that you enable VMware HA.

  But it works (if enabled) and may be useful to define how the system starts up.

  André

• VM does not start after a power failure

  I don't know which of the errors in the log are relevant.  Anyone has a suggestion on how to get my system running again?

  Thank you.

  Post edited by: a.p. - moved pasted the log file to an attachment for better readability.

  Welcome to the community,

  Data error (cyclic redundancy check).

  could highlight a CRC error on the host drive. Have you run chkdsk again to see if there are problems with the host file system?

  André

• Why Portage R700 - 15 p starts automatically after hibernation

  Why Babywearing TOSHIBA R700 - 15 p automatically starts after I put in hibernation, he (or sleep layouts) and close the cover?
  As soon as I take laptop sleep extended with lid closed in my hands to put it in a bag - it starts by itself with closed lid...

  Anyone had similar problem and solution for this?

  Thank you

  > Is there any setting for laptop, or Windows 7 which not is not notebook on the State of Standby/Hibernate when the lid is closed?

  First of all this is not serious if the lid is closed or not a fact is important: notebook is set into hibernation mode and wakes up if USB mouse is moved

  Is the BIOS contains a few options Wake Up, you should check the settings of the BIOS as Wake Up on LAN, Wake up on keyboard etc. turn off these options, save changes and check how it works