Startup and loading Different programs
Computer is very slow at startup and constantly get different and various Windows error messages such as:
1. Windows Media Player has stopped working.
2. Windows Media Center Store Update Manager no longer works
3 Kbd.exe stopped working and was closed
4 search index has stopped working and was closed.
5 Svchost, a few things of Protocol and other
Here are some of the examples, I have seen many others.
As I said, the computer became very slow to start once it arrives on the desk. I ran registry cleaners, disk cleaners, defragmentation... etc, etc. The loading of any program from the desktop is extremely slow, but once they charge they seem to work well, except when they are required to "load" other things.
I'm not a computer expert, but I do ok with repair of problems on my PC and others. This however, left me speechless. It seems to be a problem with Windows programs by default and, possibly, a hard drive problem. Any help would be appreciated, and if there is more information that anyone might need, I will be happy to provide it.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).
----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685
Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx
There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html
There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html
Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/
===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.
Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us
Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125
Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3
Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
V.8 InDesign crashes on startup and loading, after which works all fine, except the Panel who are slow like crazy. Replacement by default/history, has no effect.
Is there any help for this issue or it's political Adobe to care not at all?
Nicely,
Damir
CS6 is not supported because there is no financial sense to spend money trying to 'fix' an old program to run on a new hardware/OS with (no guarantee of success), or a willingness of users to pay for repairs when new versions are already in operation. There is no reason why you can't continue working in CS6 - do - if you don't need the features that have been added since then. You just need to run it on a compatible hardware.
-
Once I have purchase the monthly package and load the programs on my computer, I am able to load presets, I bought outside of adobe for programs?
If the presets are compatible with the versions you are installing, Yes.
-
Error loading c:\program files\arcadeweb\arcadeweb32.dll at startup
Original title: error loading c:\program files\arcadeweb\arcadeweb32.dll
I get the error message (error loading c:\program files\arcadeweb\arcadeweb32.dll) I click ok and it goes away, but returns the next time I bring my computer. Place UN til yesterday, I received the message for rundll. What should I do?
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Step 1: If you have ArcadeWeb program installed on the computer, and then reinstall that program and check.
Step 2: Alternatively, you can try to perform the clean boot on the computer to resolve this problem.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer. -
System supports boot time and load programs.
Original title: Explorer 7
I recently installed explore 7 6. everything seems to work ok, but it takes a lot of time for my system to boot and load programs. Any suggestions?
Hi larryleto,
Method 1:
You can try running the fixit tool that will correct the problem of system performance.
Run thefix tool from the link provided below:
Difficulty of Windows system performance slow computer problems
It will be useful. Please let us know to get help.
Method 2: Safe Mode
Step 1:
Try to start your system inSafe Mode and check if the problem persists.
Step 2:
If the problem does not persist in Mode without failure, you can tryclean boot.
To run starting in minimal mode follow the steps in the article below:
Perform the clean boot in Windows XP
Note: After completing the clean boot troubleshooting steps return the computer to normal startup by selecting the normal startup option.
It will be useful. Please let us know to get help.
Thank you, and in what concerns:
Naman R - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to make a different splash screen and loading gif using visual studio?
Hello
I use visual studio to develop my application webworks. In my screen config.xml, I see a spot that says loading screen.
I want to do is have a splash screen at startup up and load a gif to the remote page. I can't separate the 2 here.
The start screen and the gif are different images.
Thanks for any help
What you are looking for is not vascular supported by the features of the screen load. This is a screen of loading stated in all scenarios.
-
I get this error "Flight Simulator could not load some program files and will now close" - does anyone know how to solve?
Hello
I suggest you to please follow the steps described in the following articles and check if it helps.
"Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips
http://support.Microsoft.com/kb/812467
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457
Let us know if it helps!
-
Windows XP computer - my wife is no longer will start and load one of its programs.
Remember - this is a public forum so never post private information such as numbers of mail or telephone! My
Ideas: Computer my wife is no longer boot up and load one of its programs. When you turn it on, Windows XP loading blinks and then you get an error message that says: "you cannot use MSN to connect. Please choose another dial to open a windows session. With this message, all you have is a 'OK' that affects when you click it, gives you your photo screen saver and nothing else, so you have no where to go. A few days earlier, she had an alert to update update to windows 8, but she refused and it seems that since then, she has been the problem. Can anyone help?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Refusing to install IE8 would cause problems, Indy. Try to post here for assistance instead: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads
Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program. How can I fix it so the SLL laucher works.
Sorry, it's a product of the gainful. I can't test it. Go to http://support.vocalocity.com/ for support.
-
Two different programs, is Security essentials and windows defender? They collide
Original title: security essentialsTwo different programs, is Security essentials and windows defender? They collide
Yes, 2 different applications. Defender is anti-spyware only and Security Essentials has antispyware and antivirus. Windows Defender is useless if you use Microsoft Security Essentials, given that the built-in anti-spyware component and allows you to disable Windows Defender by design.
-
How to load a programe so can be observed in a single account and not others
I want to load a programe in my administrator account and do not have what we see into account children on the same computer.
I tried to load it, but all icons appear on all accounts.
Tried to delete his account, but he is also my account and now cannot use programe.
I have windows home Vista
Hello
1. is the account of children one Admin who has administrator rights?
2. did you of recent changes to the system before the show?
3. How have you tried to remove the program in the account of the children?
4 are. what program you referring?
5. what happens when you open the program now?
Method 1:
Follow the link below and uninstall and reinstall the program, and check if that helps.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Method 2:
Follow the link below and set parental controls for the user account and check if that helps.
Set up Parental controls
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls
In addition, check out the links below and check if that helps.
Prevent children from using specific programs
http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-children-from-using-specific-programs
Control when children can use the computer
http://Windows.Microsoft.com/en-us/Windows-Vista/control-when-children-can-use-the-computer
Let us know if it helps.
-
When I open a program that takes a few seconds to load and open another program while I'm waiting, it will automatically put the first window on top when it has finished loading. How do I not do?
Hello
Unfortunately, it is not possible to change that outside of the modification of the order in which the programs open.
If you have feedback or suggestions, you can express their opinion on this at:
It will be useful.
-
Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».
Now, after a few days looking for a response, I decided to ask the guy who made the game.
The error message also appears when I download just 2 service packs of Microsoft also.
I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bitOriginal title: fsx gold edition...
Try this, it worked for me:
(1) uninstall normally from the control panel.
Reinstall 2) in the Windows directory (C: here)
(3) install SP1, SP2
-
When I load Illustrator CC 2015 the page says Initialising... and then the program freezes and will not open. I can only successfully open Illustrator once in each tent 4 or 5.
This drives me crazy, is anyone else having this problem or know a way to fix it?
Thank you
Liam
Hi Liam,
Please try following steps:
1. close the AI.
2. navigate to C:\Users\your username\AppData (hidden folder) \Roaming\Adobe\ Rename 'Adobe Illustrator 19 settings' folder 'old Adobe Illustrator 19 parameters.
3 re launch HAVE and check.
Thank you
OM
-
Some time ago I bought ADOBE production Premium Windows CS6.
At the time where I actually responsible programs without any problems.
Since then I have loaded Windows 10 and lost the programs but had already
Saved files from the ZIP.
I tried to load the programs today, but I get the following message
Please insert Adobe Production Premium Disc UM6 - MUL
Because it was a download, it is not a loading disk.
Make a new download
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
-Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Maybe you are looking for
-
connection to the server id error applies
connection to the apple id Server error
-
Toshiba 46TL968 cannot read the list of channels - only "hotel mode" appears
Before the new update, I was able to easily read in my channel edited list.When does the thing "dumb, dumb down", a pop up appears, where asked me, if I want + read In + or + write on +. Now, after the update (and reboot, that destroyed my channel se
-
Satellite A100 does not supply power to the top
I have a client who has the Satellite A100 (PSAA2C-LE100E) and its not turn on the power. He bought a new AC adapter and tried the battery in and out and still not solve. Should there be a light at the front of the laptop when it is plugged in and tu
-
Vista will not initialize my external hard drive
I have a hard drive that I took from my old PC (the disc is in the 3.5 series) and I bought a case for it so that I could connect to the laptop, I did that he is set to slave and went to initialize, but when I click on it it says "the device is not r
-
Server PowerEdge PE T630 Windows 2012R2 update device driver
We should install this device driver to update Windows on Dell servers? Hewlett-Packard Development Co, LP. -Other hardware - HP Baseboard Management Controller peripheral IPMI Download size: 1.5 MB You may have to restart your computer for this upda