Startup error: DLL Load error can not load the resource dll: REPLRES. RLL the specified module could not be found
Original title:
ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found
I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please? Thank you!
You can try to start in safe mode and check if the problem persists.
The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:
If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:
NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.
Method 2:
You can run Windows Defender Offline tool.
See the following link for more information about the same:
What is Windows Defender in offline mode?
Windows Defender Offline: Frequently asked questions
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Method 3:
Try the SFC (System File Checker) scan on the computer.
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
Let us know if it helps!
Tags: Windows
Similar Questions
-
Every time I restart my PC, I was above error... Then when I try and download the toolbar from Road runner, I get this (windows cannot access the specified device, path or file. You don't have permission from the appropriate permissions to access the item)
C;\users\Dan\AppData\local\Temp\GLF391~1.exe
Please, can someone help me with this... Thank you...
Hello
To remove the error message if still there after the controls above to malware.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxI hope this helps.
-
RUNDLL error
The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.
Error loading c: | windows | izameweb.dll the specified module could not be found
Kind regards
Anne-Marie
Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner
-
How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found
Hello
Google has no informatrion on this (ufohudusiboqudo.dll), so it's probably the Malware that your Antivirus has deleted, but who left a start for her entry.
Download, install, update and scan with the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
If the error persists after scanning, use this FREE program to delete startup entries:
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found
This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.
Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/
To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.
-
Whenever I start my windows xp, I always got the error
RUNDLL
Error loading C:\Windows\onedidak.dll
The specified module could not be found.
I google, would be Bing and yahoo looked everywhere for the use of the onedidak.dll and could not find answers.
Help, please!
I'd take a peek at this recent activity in this other thread where there is a happy ending, and it makes sense (only the name of the DLL is different).
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/get-error-message-regarding-ccncolmsdll-file/5770d2f6-805e-E011-8dfc-68b599b31bf5 -
Original title: Rundll error help
As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject. Help
RUNDLL
Error loading c:windows\mcycol40.dll
the specified module could not be found.
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that you had or have an infection, followed with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
This happens every time I start my computer. I can't do anything with the computer until I click the OK box. Then everything is generally well, but sometimes the computer just hangs. What is this and how do I get rid of him?
It's just a dll name random belonging to some malware that had removed your antivirus programs or security.
The error is because the point of loading in the registry is still present and it is trying to load the module that no longer exist where the "load error".
You can uncheck the corresponding item in msconfig > startup, or if you scan from HijackThis, you can run it and difficulty of the relevant start pointing to icstlt2.dllentry.
Similar to the example of an entry from Hijackthis below.
"Rundll error loading c:\windows\ksexyn.dll. The specified module could not be found.Fixing the entry in HijackThis stopped at the error.
O4 - HKCU\... \Run: [Pzemowukatiy] rundll32.exe "C:\WINDOWS\ksexyn.dll",Startup"
http://free.antivirus.com/HijackThis/Let us know if you need more assistance.
-
execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?
You could have, or still are, infected by malware; and it could also be a starting top left him entry.
Malware scan:
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the error persists after scanning, use the program to out startup:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project
use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.I get an error when debugging to
Public void RegisterGPIBGlobals()
in the Vbib - 32.vb, the error msg says:
Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)
It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on
C:\Windows\System32, the msg of error becomes:
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?
2 Will the application I am writing with .NET work in x 64 Windows 7?
The Almighty gurus and Mods please help. Thank you!
Hi Joel, thanks for the answer! I have the 3.0.2 driver.
I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:
«To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»
So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.
-
How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?
Hello
Here is some information on this problem.
The information contained in the link suggest you delete a scheduled entry, if it exists:
http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/
You can also use this program (FREE Autoruns) to find:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
Original title: sbdbrbs
When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.
Can anyone offer any assistance? Could not find this particular dll through search engines file.
Thank you
Looking for errors like this by doing a search on Google for the name of the file. Usually, they turn up without success.
When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.
First of all, download, install, update and run full scans with two of these free analytical tools:
MalwareBytes AntiMalware
SUPERAntiSpywareDo not run the scans at the same time. They can take some time, so start an and then go for a non computer chore for awhile.
If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns. Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message. If it is not displayed in the connection tab, click the "all" tab and use the file > search tool. A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."
Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box. The latter prevents the line running, but you can reactivate it later by removing the check mark.
-
Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found
When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found
Anyone know what it is? I have not noticed a difference in the way the computer runs
Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete
-
Hi Thahaseena,
Thank you for helping! Finally I solve the problem of the error1324.but there were other questions come, after I did the clean boot and restart the computer then log, the window came several times put warn against the "Rundll":) 1 awuspn.dll 2) error loading yabbyx.dll loading error (both happened to uo WARNING several times). And boths display the message "the specified module could not be found. I tried to restore the computer to the State at the beginning, but it has no will to restore before the own boot.would you please help me to solve this problem again?
Thank you
Well, I want you to do is run MalwareBytes. You say you already ran MalwareBytes after the clean boot, and then tried to reload regularly?
Whatever program you have downloaded to fix the missing image file sounds like he came by malicious software. What is the name of this program.
--
Gina Whipp
Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
Maybe you are looking for
-
Satellite click 10 - keyboard battery is not available
Hi, just bought a LX5W 10 click and the State of the battery for the keyboard says "This battery is not available for use" the keyboard works fine. I've updated the bios and 1.7, responsible for 24 hours and the windows update 10 nothing helps. Any i
-
I can't try to plot the graph of an output matrix, Sk since a MathScript node. The Sk parameter should be a way out of the matrix (12 x 1) with the length of the added step. I can see that its fate in the form of a table 3D but can not get the graph
-
Audio stutters when listening to music on T420s - 4174FM9 - Bluetooth
Stutters audio when you use a bluetooth connection to my speakers BOSE (from Spotify). Has started recently. Cable works perfectly. I use the version of Thinkpad BLuetooth 3.0. Conexant HD Smartaudio 20672. Any suggestion?
-
Hello, I have Windows Media Center, and I tie to get the 2 Roll-up so I can connect my computer to my xbox, but I need to do this: WindowsXPMediaCenter2005 KB900325-United States, but it will not install. I think the problem is that I do not have thi
-
How to troubleshoot a computer has restarted after a bugcheck error
I recently had to rebuild a Dell Latitude E6500. After you have reinstalled the operating system (Windows 7 64-bit) and the drivers supplied on the Dell Web site, I had the computer shut down unexpectedly. A glance at the history of reliability shows