startup error message: printer card transfer moniter has stopped working

Similar Questions

• At the opening of my Compaq Presario I get the Microsoft message "Printer Card transfer Monitor has stopped working"

  I have a Lexmark X 6570 all in one. I tried to restore to comm. between the printer and my Compaq. I uninstalled the Lexmark program (twice) and then downloaded the latest driver from Lexmark, but always the same message. What can I do to recover my printer? It is very important for me. In addition, the message in the window of the printer when I try to scan shows "cannot download the application list. Can someone help me with this? As you can probably see, I'm not very 'computer', but I can follow directions! Thank you and have a great day!

  I assume you are using the wireless printer. You have made no changes to the network recently? For example, new router or wireless password has changed.

  For the problem of scan, I found the following procedure works.

  • Enter the IP address of the printer in the address bar of your browser and press ENTER. If you do not know the IP address, print a Network Setup page using the procedure shown on page 52 of thehttp://www.lexmark.com/publications/pdfs/2007/6500/v4897402_en.pdf user's guide. The address will be probably 192.168.x.y where x.y is the number assigned to the printer.
  • Now, you will be connected to an administrative page on the printer.
  • Select Configuration.
  • Select a scan in the management of network hosts.
  • Check users to delete all registered.
  • Select Remove.
  • Try to start a new search.

• Error message "Windows Server 2008 R2 has stopped working correctly"

  Original title: why my Windows 7 that... "Windows Server 2008 R2 has stopped working properly"

  Hello

  I just noticed a message in my Windows 7 Action Center indicating that...

  'has stopped working properly.

  It gives a link to an article, but I don't know if it's appropriate.

  https://support.Microsoft.com/kb/2632149?WA=wsignin1.0

  I have no problems with the PC and it runs fine., although my most recent problem has been a failure with the create a system image, but which was set by performing a CHKDSK/r that solved the problem.

  Everything else is fine.

  What should I do?

  Thank you

  Adrian

  Hello Adrian,.

  Thank you for visiting Microsoft Community.

  I understand you get error message "Windows Server 2008 R2 has stopped working correctly" in your computer maintenance center. Apart from this, your computer works fine.

  This error message appears because of political use of heavy group, and the presence of SCOM, causing a deadlock condition between the processes Lsass.exe, redirect Drive Buffering Subsystem (Rdbss.sys) driver and the Winsock Kernel.

  A fix is available for this question, I suggest to run the fix in the article below and check if that solved the problem.

  A computer that is running Windows Server 2008 R2 or Windows 7 stops responding randomly

  http://support.Microsoft.com/kb/2265716

  I hope this helps. Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working". How can I disable my old macbook pro and activ DEAD CS4

  Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".

  How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?

  Hi Christophe,

  Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  Contact technical support for assistance:

  https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp

  I hope this helps.

  Concerning

  Megha Rawat

• Windows 8 - Photoshop CS5.1 crashes at startup. Error message: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  Hello!

  I got the student version software Adobe Creative Suite 5.5 Design Premium for several years now.

  When I got my computer Windows 8 I installed the software without problem.

  Last week when I tried to open Photoshop, I get the following error: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  I disabled and uninstalled all of the Creative Suite and then reinstalled. I am able to open other programs, but still the same message for Photoshop.

  What can I do?

  I found that the problem was with Nik filters I used. The filters have been messing around with Photoshop initialization. I uninstalled and reinstalled the filters and now Photoshop works like a charm.

  It seems that this forum is dead?

  Fortunately, I managed to solve the problems on my own and figured out the problem...

• Critical errors dealing with MRT.exe and error messages "Services and controller app has stopped working".

  I get two error codes... "Services and controller app has stopped working" and "Windows has encountered a critical problem and will restart in a min. Please save your work." The only time where it does it but when I plug my cable network. Already ran sfc and found nothing. Ran malwarebytes and removed a lot of viruses, I picked up, but I think that something in my registry can be screwed up after trying to remove the said virus. I was getting some kind of error MRT.exe and I tired looking for things to the top on this but I think I can have messed up a registry that was loaded entry of this and it has damaged something.

  Someone at - it answers that do not involve me having to reformat and install a new OS. I bought the computer off of a friend and it's a custom-made computer, so I don't have Vista Disc... while hoping a good solution.

  Help me please! :)

  Thank you
  Bishop

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Regarding the relocation:

  You can borrow a suitable Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

  On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

  But it's a Dell software!
  You look at not only their website, contact you them directly.

  Contact Dell: http://support.dell.com/

  See you soon. Mick Murphy - Microsoft partner

• It would not be possible to charge students licensed CS4 on a new computer? I get the error message "License for this product has stopped working": 150:30

  I bought a newer and faster apple.  It won't be possible to recharge my CS4 Design Premium student license version?

  Is the student license a perpetual license? Is its use related to my maintaining student status?  In other words, can I still use the software

  When I'm not a student anymore?

  You must uninstall, clean and reinstall then by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  but you will need your serial number to reinstall and activate.

  Refer to:

  • Error "Licensing has stopped working". Mac OS
  • I get an error 150:30

  Concerning

  Baudier

• Error message 'scan to MS Sharepoint has stopped working"

  The message arrives at the boot upward and seems to slow down the boot.

  Hi RichardMarkFord,

  Are a. When you this error?
  B. recent changes made on your computer?

  Try to perform a clean boot and check which program is causing the problem.

  1. click on start in the start search, type in msconfig and press ENTER.
  2. on the Services tab, select hide all Microsoft Services.
  3. on the Startup tab, click Disable all, and then click Ok.
  4. If you are prompted to restart the computer, click Restart now.

  When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.

  Check out this link that talks about how perform a clean boot

  Note: Follow all of the steps in the link to know what software are contradictory.
  http://support.Microsoft.com/kb/929135

  Don't forget to reset the computer in a Normal startup once find you what software is conflicting.

  Let us know the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

  I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

  Hello

  • Have you tried the suggestions of Imran M in other post?

  You can view these methods:

  Method 1:

  Temporarily disable UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:
  I recommend the clean boot and try to run the program.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• CS4 for Mac gives me this message: "license for this product has stopped working. 150:30 error code. Subsequently no longer works. How to operate?

  CS4 for Mac gives me this message: "license for this product has stopped working. 150:30 error code. Subsequently no longer works. How to operate?

  Please see this link for solutions to this message:

  Error "Licensing has stopped working". Mac OS

  Kind regards

  Guinot

• I get the rror message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your administrative COMPUTING

  I get this error message. "Error adobe license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (148: 3) "How can I fix it? When I reinstalled the software, I get a message that I have an invalid serial number.

  Hi John,.

  Could you please the version of Acrobat you are using, and also work on the operating system?

  To check the serial number of your product, you may return the following document.

  Quickly find your serial number

  If you are using windows you can see the following link for more information on the solution to the existing problem.

  https://helpx.Adobe.com/Creative-Suite/KB/error-licensing-stopped-Windows.html

  If you wish to contact Adobe support team, please visit the following link.

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Please click the blue button "Still need help" to connect with Adobe executives.

  Let us know how it goes. In case you need more assistance write us back.

  We would be happy to help you.

  Concerning

  Sukrit diallo

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">