startup error: unable to find: gmsapns.dll c:\windows\

Original title: start-up to receive a message that windows can not find: gmsapns.dll c:\windows\

Need to recover these files

You might think differently after reading this:

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

A Google search generates no good reputation hits making the file name even more suspicious.

A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
You can also click file, search to search for logon, or any tab for all or part of the name of the element.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
.  Autoruns shall display the same information however.
Given that you had or have an infection, followed with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Restart your computer and solve the outstanding issues.

Tags: Windows

Similar Questions

  • iOS (iPad): error "Unable to find traits named" during the 'standard' generation only

    Hello

    I built an app with happiness on the desktop and the "fast" mode without any issue. However when I Isaiah to compile Standard mode I get the following error will appear:

    Exception in thread "main" java.lang.Error: unable to find named features: spark.components.supportClasses::StyleableTextField

    at adobe.abc.Domain.resolveTypeName(Domain.java:232)

    at adobe.abc.Domain.resolveTypeName(Domain.java:149)

    to adobe.abc.GlobalOptimizer$ InputAbc.resolveTypeName (GlobalOptimizer.java:272)

    to adobe.abc.GlobalOptimizer$ InputAbc.resolveSlotType (GlobalOptimizer.java:946)

    to adobe.abc.GlobalOptimizer$ InputAbc.resolveType (GlobalOptimizer.java:535)

    I think it has something to do with the fact that I have a preloader class with my request. Even if it is not necessary for the iPad itself, this app is cross-platform and is intended to be built as a standard swf for web use, so I would like to keep in there. I had to include the following two paths as records of CFCS in my way to build Actionscript-> library path in the project settings for it even compile in the first place:

    C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\libs

    C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\locale\en_US

    So I suspect that they may have something to do with my problem. I use the latest released SDK Flex with Adobe Air Flash Buidler 4.6 3.4.

    I've seen tons of people complaining about this error when it comes to Air Native Extensions (ANE) but I do not write one. Someone has encountered something like that with just a simple app?

    Thank you!

    I solved the problem. I had to include manually in the source path C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\projects\mobilecomponents\src, which is the case of the traits: spark.components.supportClasses life. When I tried with Flash Builder 4.7 or 4.04 FlashDevelop, I didn't have to do so I don't understand the inconsistency here. But at least it compiles.

  • I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

    I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

    Hi David,

    Please, try the following steps:

    Resolve the error "missing file msvcp110.dll.

    Kind regards

    Chirag

  • Error: Unable to find DLL entry pointProtctionNotify chnge in mbam

    Tried to launch Malware Anti-Malware and get the following message.
    Can not find the DLL entry pointProtctionNotify chnge in mbam
    Does anyone have a solution?

    Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

    Hello

    1. what operating system is installed on the computer?

    2 have you tried to uninstall and reinstall Malwarebytes?

    I suggest you to uninstall and reinstall Malwarebytes and check the issue.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    To reinstall Malwarebytes, follow this link:
    www.Malwarebytes.org

    If this does not help, you can post your request in the forums of Malwarebytes.
    forums. Malwarebytes.org

  • Startup error: unable to load file or assemblyl

    I get this error message when you try to open my software:

    Startup error: could not load file or assembly 'System.configuration, Version = 2.0.0.0, culture = neutral, PublicKeyToke = b03f5f7f11d50a3a' or one of its dependencies. The system is unable to remove the specified file.

    I tried to clean .net and re - install, but I still get this error.

    Anyone know why?

    Try a system restore before the problem started:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    If it does restore before installing the updates, try to install the updates one at a time to see if there is a conflict and hide the update if necessary.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Error "unable to register the DLL/OCX: Regsvr32 failed with exit code 0x5" when installing a WinUtilities

    Hello

    After the installation of WinUtilities, I get the error: failed to register the DLL/OCX: Regsvr32 failed with exit code 0 x 5.

    My system is Windows XP.

    Are there any missing service or not started?

    Thank you.

    Access the Run item on the start menu and type:

    regsvr32

  • Error-603 occurred While Building DLL under Windows XP and LabVIEW 8.6.1

    Problem:
    I am creating a DLL in Windows XP and LabVIEW 8.6.1 and I get the error-603.

    Error-603 to the DLL of the building.
    A component required for the Application Builder does not support the required functionality. This could have been caused by an older version of LabVIEW installation after installing this version. To correct this problem, reinstall the latest version of LabVIEW.

    Possible reasons:

    LabVIEW: Specified key or value does not exist.

    I reinstalled my LabVIEW 8.6.1, but the problem still occurred.

    What can I do to fix this?

    Reinstall, which is suggested here too

  • "Input error: can not find script file"c:\windows\system32\prnport.vbs.""

    Hello everyone.  I looked for some time and found no solution for this problem, so please forgive me if the answer has recently given or easily acquired.  My desktop running Windows XP seem to be missing the script "prnport.  I've looked up and down, but can't find it.  According to http://technet.microsoft.com/en-us/library/bb490975.aspx and many other sources, the typical place lies the \system32 folder.  Any help is much appreciate and thank you very much.

    -Matt

    I was unable to find it on the installation disc.  Instead, I just took the script from a Windows 7 machine and placed in the computer XP system32 folder.  So far, things have been working well.  Thanks again.

    -Matt

  • Trying to download the order of the photo, I keep getting an error message: "cannot find p90.dll msvc.

    Original title: MSVC P90. MISSING DLL

    When I try to download a Walgreens or Wal-Mart photo order, I get a message: "can't find msvc p90.dll" which gives and how to fix it?

    Hello

    1. what program you use to download the photo order?

    2. were you able to download photo arrested earlier?

    3. What is the error message or an exact error code?

    4. have you made changes on the computer before this problem?

    I suggest you to download and install the Microsoft Visual C++ Redistributable package and check if it helps.

    Microsoft Visual C++ 2010 redistributable package (x 64):

    http://www.Microsoft.com/download/en/details.aspx?ID=14632

    Microsoft Visual C++ 2010 redistributable package (x 86):

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

    Please provide us with more information so that we could help you to solve the problem.

  • Rise of Nations Thrones and Patriots - updated "Error", unable to find the Patch

    As the title says, I have installed T & P RoN, and I can't patch for the latest version, which would allow me to play in multiplayer mode. Whenever I click on the button "Check for Updates", it says "Error", then "can't find the Patch. How can I fix?

    Thank you!

    Hello

    Step 1: Check if updates are waiting to install:

    Install Windows updates in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

    Step 2: Try to install the patch in safe mode with networking:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

    Step 3: See the article on how to solve the problems of the game performance:

    The problems of the game performance

    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

    Visit this link below to install patches:

    Rise of Nations Update 4

    http://www.Microsoft.com/games/riseofnations/downloads.aspx#patch

    It will be useful.

  • Startup error - missing winnt_root\system32\hal.dll

    I get this message every time I try to start. I tried 2 method of support suggestion - the use of CD-Rom to run the console and recovery bootcfg/rebuild... get through the operation but always boots with error message. but he never asks an administrator password? Method 3 was not able to run as he ot recognize the command. This is on a Dell XPS720... I forgot... It is Win XP Media Center Edition 2005 - roll-up2

    http://support.Microsoft.com/kb/314477

    Try Method 4.

    If this post answers your question, click mark as answer .

  • HP Photosmart 6510 (error - unable to find printer)

    Hello

    I try to install the printer on my laptop, Windows 7 64, but he will not find the printer.  I tried to put the IP address in, but it will not find it.  The printer is connected to the fine wireless.  I only managed to get to print once on the IP but now won't.  I tried to uninstall, disable the firewall, installation of the site of the CD and HP, but still no luck.

    I can print directly from my iPhone without any problem.

    Any help would be appreciated.

    Thank you, Rose

    Hi mealocr,

    Follow the steps described in the documents below to install the printer.

    Macintosh: Installation of the software product under Mac OS X 10.6 (Snow Leopard) for a USB connection

    Installation of the software of the printer for a wireless network connection

  • "Unable to upgrade to Vista XP, error" unable to load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.

    Original title: manifest errors in the log file of the installation after the upgrade to Windows XP Pro SP3 for Windows Vista Ultimate

    I was looking for an answer to the following problem.   I tried to move from XP to Vista a few months ago, without success.   I thouhgt it might be a compatibility problem with my old ASUS motherboard, so I tried all of the suggestions. down to 2 GB of RAM to 3 GB, to remove all the necessary equipment before the upgrade, disable unnecessary hardware support in the BIOS, etc..

    I just bought a new ASUS motherboard with their 890 chipset.   I tried the upgrade again, same thing: the upgrade runs without error, then starts at the restart to complete the installation.   He gets the Green and white Microsoft amimation loading and goes no further.

    After reading a few peosts in this forum, I found my upgrade/install error logfile.   I found the following few lines below:

    2010-10-11 12:14:34, error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate-> LoadDllServer (C:\$, WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3}, 0) failed, hr = [0x8007007f].
    2010-10-11 12:14:34, error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW (C:\$ WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) could not rule = 0x7f. [gle = 0x0000007f]
    2010-10-11 12:14:34, error [0 x 080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr = 0x8007007f. [gle = 0x0000007f]
    2010-10-11 12:14:34, error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate-> LoadDllServer (C:\$, WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3}, 0) failed, hr = [0x8007007f].
    2010-10-11 12:14:49, [0x08071d] MIG CDownlevelOCStore::GetOCCollection error, failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man. : Class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
    void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

    2010-10-11 12:14:52, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
    void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

    I guess he can't find a certain file he wants so that the upgrade can complete.

    Scientists here know what I need to change?

    Thank you.

    Hi Mike J2
     
    1. are you able to boot on Windows xp?

    Step 1:
     

    If you can start Windows xp, then I suggest you run Vista upgrade Adviser and check for the report.
    You can also run the updates of windows on your computer and try to install all the updates on your computer and check.
     
    Step 2:
    Reference:
     
     
    You can also check this below article provided Windows help to upgrade Windows XP to Windows Vista.
     
    You can also check:
     
    Upgrade Windows XP to Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/upgrading-from-Windows-XP-to-Windows-Vista

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Could not find msxml4.dll in windows 7

    "" I'm trying to play Age of Mythology, and I'm getting the "MSXML 4.0 not installed" error message.
    I go to windows/system32 and I can't find the msxml4.dll file. I have msxml3.dll and msxml6.dll but not ISE one labeled as version 4.

    any suggestions as to why or where I can get version 4 to play this game?

    MSXML 4.0 is not a component of Windows.

    You can download and run http://www.microsoft.com/en-us/download/details.aspx?id=15697 msxml.msi to install it.

    Run Windows Update after installation, there are a a few security fixes.

  • Portege Z30 - A - unable to find the 64 bit Windows 7 drivers

    After installing Windows 7 64 bit I have 5 drivers that appear in Device Manager.

    PCI serial port
    PCI Simple Communications controller
    3 unknown devices

    In system information, they appear as
    ACPI\INT33A0\0
    ACPI\TOS6205\2 & DABA3FF & 2
    ACPI\TOS6208\2 & DABA3FF & 2
    USB\VID_138A & PID_0010\BA110BEC1AB5
    PCI\VEN_8086 & DV_9C3D & SUBSYS_00011179 & REV_04\...
    PCI\VEN_8086 & DV_9C3A & SUBSYS_00011179 & REV_04\...

    Hello

    Can you please tell us what model do you have exactly?
    I just want to check if Win7 64 bit drivers are available on the Toshiba download page.

    Anyway, how to identify the unknown device, you will find on this page.
    http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

Maybe you are looking for