Startup gets "Network cable unplugged" on mini-PCI Wireless card

Similar Questions

• Startup gets "Network cable unplugged" on (new) wireless mini-PCI card

  Repost in the previous topic was locked, but has not been resolved. Original post below, please see previous post for more details

  I recently installed a Netgear DG834GT wireless router and now have intermittent problems connecting my Tecra 9100. If the 9100 has been off for awhile (like overnight), when I restart I get always "Network cable unplugged" for the wireless connection. Reboot several times (anything from 3 upwards) I finally get connected to the router and everything then works fine for hours. Even a quick restart at this point (that is, once that the wireless adapter is connected) does not cause a problem, but as soon as I leave the stop of the machine during a time he fails again on restart.

  There are no errors in the event log.

  I am using wireless mini-PCI cards and have already updated to the latest version of the driver.

  Any ideas gratefully received, for now every morning is a 20 to 30 minutes of rebooting frustration trying to get my connection work.

  (Running Win2K professional)

  Hello

  I have the same problem if I stand for laptop and access point at the same time. If the access point is already in use, the connection is established shortly after. First the access point must establish a connection to the modem. Now the wireless connection is not available.

  I guess after the second reboot, the connection between the AP and the modem is already finished and you can use the network wireless successfully.

  Good bye

• Satellite P300-23F-mini-PCI Wireless card Replace?

  Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

  The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

  Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

  Hello

  I think that this should be possible, but you must use Mini-PCI cards.
  The antenna WLan that is placed behind the screen provides two sons; black & white.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

  Greetings

• Satellite T130-17F - upgrade to the Mini-PCI Wireless card

  Card WiFi in Satellite T130-17F doesn't support the 802. 11A / 5 GHz. I would like to replace it with one that is supported. Is this possible? If so, are there any documents that show how do?

  Thanks in advance, Igor Bukanov

  Hi mate

  Usually the laptop supports WLan miniPCI module. This means that usually the other WLan miniPCI cards should work, but I read also here in the forum that it is not always the case and sometimes other WLan miniPCI card would not me recognized correctly.

  But why you try n t a simple solution like a USB WLan stick?
  It is the simpler and in my opinion the best solution for you.
  You will not need to disassemble the laptop. This means that there is no risk of damage and the warranty

  That's why I recommend you try this solution.

• Need advice for the purchase of a mini PCI Wireless

  Hello

  I have a laptop Toshiba I bought nearly two years ago. This laptop has an Intel 2200BG wireless chipset, which works, but the quality of connection is quite low. Sometimes, the connection speed climbs, sometimes it falls in total. I tried all the updates driver, power management tips and everything that could be found on the net. Some of these help, but there is always something that doesn't work as it should.

  Long story short, I decided to buy a mini pci wireless card. The problem is that these cards are nowhere to find. There is nothing on the Toshiba site, and apart from a few offers on eBay, there is almost nothing to choose. I know there are other options, but I prefer a mini pci card.

  Can someone help me on this issue?

  Thank you

  Peter.

  Hi Peter

  Can you please tell us which laptop model you have?

  In any case, the network without WIRE Intel 2200BG card is good enough and works very well on my Satellite M70 (with the latest driver). Download speed is very good and I do not need a wireless network card. I don't know what is the problem with WLAN connection in your case, but please try to test with another router WLAN (maybe your friends have all other routers). Also, install the latest WLAN driver for this card.

• Satellite M100-165: network cable unplugged message

  My NEW laptop TOSHIBA M100-165/model PSMA1E / with network card 10/100 VM Network Adapter Intel have big problem when connected to my office network!
  So many collisions I see on my HUB 3COM/model TP800 /. But this hub works perfectly with other computers in my office / other 5 computers works perfectly on this HUB!
  When I tried to connect my laptop directly to the floor /model of the CISCO Catalyst 3500 switch series XL / pops up the message "network cable unplugged".

  Only for the test I tried another TOSHIBA laptop computer in our network, but with the Intel 10/100 VE Network Adapter network card. And this laptop works perfectly.
  I hope you can solve my problem as soon as you can!
  Thanks in advance!
  Best regards!

  Ivo Vachkov

  Please see this topic on the forum. Maybe it helps
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14852&MessageID=54037

• Laserjetpro m252dw: printer says network cable unplugged when plugged into a wall outlet

  My printer worked fine and all of a sudden, he is no longer prints and the display shows: "network cable unplugged".

  I turned off the printer, it is plugged. Does the same thing for the modem and the router. The problem is not resolved. Help, please

  Hi @Kajosil,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print because of this "unplugged network cable" error message on your HP LaserJet Pro M252dw Color printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that the printer does not have enough power to work properly, or there is a problem with the cable/port.

  • Please click here to update the firmware of the printer.

  Make sure that the ethernet cable is connected to the appropriate port on the back of the printer.
  See the section: 'Return product view' in the user manual for more information.

  • Have you tried another port on the router?
  • Have you tried another ethernet cable?
  • Check if the cable is damaged or deformed.

  If the problem persists, I would like to do a hard reset and electric drain to see if this will solve the problem.

  • To eliminate other causes, unplug the USB cable or telephone (fax) for the test so attached.
  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Press and hold the power button for about 15 seconds to drain any residual electric load and then release the power button.
  3. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  4. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  5. Try another outlet to power/room.
  6. Try a different compatible power cable.

  If the problem persists, I would try resetting the NVRAM. This will outline the printer back to the default settings. The network must be configured again. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Error Msg: Local Area Connection network cable unplugged

  I'm installing Wi - Fi at home and continue to operate in the above msg.  I have wireless but

  I can't connect to internet at the "another computer" - not the host computer.  New router and adapter, double checked connections
  and have all the lights good... can anyone help?

  Hello

  'Local Area Connection network cable Unplugged' is a message that applies only if you use an Ethernet cable to connect to the router.

  See the documentation for your wireless adapter to find out how to connect wireless. Or number of the brand and the model this adpater for additional help.

  Tricky

• Network cable unplugged, the Panel grey adapter after removal of Fusion to a new mac

  I can't "solve this problem.

  A couple of months, I moved to a new iMac (end 2013) and the network in Fusion stopped working.

  Windows (XP) says: "network cable unplugged".

  Merge network adapter control says it has allowed (part that my mac is turned on), but the Panel is disabled, grayed out.

  I tried to change to full NAT, but mothing changed.

  Since then I upgraded Fusion 6 an update of version minor and improved Fusion 7, but the problem is still there.

  In the knowledge base, I found something similar, called other products VMWare, who suggested that the problem might be in the configuration of the network of Mac, but I am not sure where; and, in any case, S.O. and configuration and even got on the older iMac, where everything worked fine.

  I'm quite often connected to a VNC using Tunnelblick, but I tried to turn it off and the problem is still there. (And even once, on the old Mac it worked great even through VNC).

  Any suggestion?
  

  S. *

  After asking the VMWare Support they suggested merge to uninstall and reinstall from scratch. It worked.

  Uninstall completely merger: http://kb.vmware.com/kb/1017838

• Advice of A20 103D Mini PCI Wireless Installation of satellite map

  Some basic tips on installing a Toshiba PA3300U-1MPC card can be appreciated. The manual States that the card must be installed by a qualified engineer. The main request is where can I connect the wires black and white to. will I need to download a driver or will the device automatically recognized? Are there other issues to be aware of?

  Thank you

  Hello Wally

  As far as I know there are two connectors that are marked with the HAND and to THE.
  In this case, please connect the white cable to the HAND and the black cable to the auxiliary voltage
  Additionally, you have the drivers and Utilities CD Utility & Tools, or you can download it on the Toshiba site. To my knowledge, the PA3300U-1MPC is an Atheros WiFi card.
  Therefore, you need Atheros AR5001X Mini PCI Wireless Network Adapter V2.1.2.16 and Atheros Client Utility V2.1.2.16

  Good bye

• Installation of a missing mini PCI WiFi card in the Satellite 2450 101?

  My Satellite s2450-101 seems devoid of a WiFi card.

  There is no mention of such a card in the adapters in device Manager\Network, which lists the following three elements: 1) 1394 Net adapter MAC bridge Miniport) 2 and 3) Realtek RTL8139/810 x Family Fast Ethernet NIC
  The Wireless Communication switch on "on" does not have the led lights up.
  By pressing Fn + F8, that should turn the wireless LAN has no effect.

  Responses to the following would be much appreciated:

  The laptop S2450-101 comes equipped with a mini PCI WiFi card in standard, or not?

  If so, how can it be activated?

  If it is not the case, how can we install such a mini-PCI card? The laptop is more two years and more under warranty.

  Sincere thanks.

  Post edited by: SADobrowski

  Hello

  I found the info that this unit is ready WLAN and is attributed to the WLAN option in option. Check please the Device Manager and see if the wireless adapter is listed under network adapter. If this is not the case, the device is without wireless network card.

  Let us know if the card is on board and we can write once again how the card must be activated.

  I'm not 100% sure but I think that the WLAN slot is placed under the keyboard. There is also the antenna cables (black and white cable). Update is not a problem, and you can only do so at your own risk of course. ;)

  Unfortunately I put t know exactly what WLAN card is compatible. If you want you can use the external solution. It is much easier.

• Pavilion dv2-1030ea, upgrading to N Wireless - do blacklist photo hp certain wireless mini pci-e cards?

  Hi, I just got a pavilion dv2-1030ea as a gift and I want to upgrade the card wireless to a version N (only comes with B and G compatible card), but on some sites, he pointed out that not all wireless mini pci-e cards do work with computers laptops hp.

  is this always true? If so what cards are supported? also if this is the case how can I remove this restriction? IMHO, I should be able to use my computer as I see fit, not how the manufacturer decides is acceptable.

  Thanks in advance for any info

  Harry

  OK I worked on how to change the bios to allow me to use any network card I like, for all those who would like to do this take a look at this page here >

  http://www.richud.com/HP-Pavilion-104-BIOS-fix/

  and here >

  http://forums.mydigitallife.info/threads/15808-HP-whitelist-BIOS-mod-mostly-worked-out-final-info-needed

  This should put you on the right track

• What mini PCI WLAN card can be used on Equium A60 - 157?

  Hi, im trying to buy a wireless mini LAN card pci for my toshiba Equium A60-157... do not know what an I need or I can use? Thanks Carl

  Hi Carl

  According to the specs of your device is not ready WLAN. This means that you can not switch on the unit with the mini PCI WLAN card. Only solution is the card PCMCIA or USB WLAN stick.

• My emachine is a model of 1810. Can I add a PCI Wireless card to it?

  My emachine is a model of 1810. Can I add a PCI Wireless card to it?

  The ET1810 has options for adding hardware below. As long as you install the driver and the material below matches care, you should be ok.

  PCI1 ~ 2 32-bit card add-on slots

  PCIE1 PCI Express x 1 slot

  PCIE16X PCI Express x 16 slot for GUI