Startup items lost and won't start not

Similar Questions

• 21 "iMac 2010 with el capitan making a buzzing sound and won't start not

  I have a 2010 21 "iMac running EL capitan who today suddenly makes a gurgling noise and he wouldn't do anything so I turned it off and tried to put it back on and it continues to make a buzzing sound, as soon as I press the bottom of the power to the rear it hums 3 times then stops and emits a 3 stops... on a black screen. All tips thank you

  Three beeps usually indicate a problem with the RAM.

  See > Startup on computer - Mac Support Apple tones

  Sometimes, modules dispose and sometimes the modules go bad. Personally, I would check and/or replace the RAM modules.

  If you cannot or do not know how to install or check the RAM for yourself...? Next, you need to contact your Apple Store or FSAA and book a service appointment. See > https://locate.apple.com/country

• HP Pavilion won't start not

  Hello

  My HP Pavilion (info below) is does not start. She asks the system repair CD I bought them at HP but the system is still not recognizes them and won't start do not. I have run all diagnostic tests (hard disk, memory, etc). All the great test, no problem. Suggestions:

  Model number:

  LW407UA

  Description of the model:

  LAPTOP HP PAVILION G7 - 1113CL

  Serial number:

  [number of Series edited by Moderator]

  Creator:

  RYYCEBL

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as coming from a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select the Boot Menu options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• Lenovo SL500 Windows Vista crashed with STOP: 0x0000007B (0x80599BB0, 0xC0000034, 0x00000000, 0x00000000) error and won't start.

  Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start

  Hello peoples,
  I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
  Help, please! I'm really desperate right now, and any help would be appreciated!
  Thanks in advance!

  PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)

  PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!

  EDIT: The error message went like this:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)

  Thanks for the billionth time!

  have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works

• Probook4540s: 87% charged battery, won't start not computer.

  87% charged battery, won't start not computer. When power plugged in and started it shows not charging. If I remove the power cable, stop immediately.

  There are several complete responses with the steps to follow, which I did. Finally a new battery of bouht and considers the motherboard bringing not at not charge. The sending of the stack of return for credit.  Will just have to use with the power supply.

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• HP Pavilion DM4-3105tx: HP Pavilion DM4-3105tx after the upgrade to 1 TB HARD drive won't start not and cannot get into the bios

  Hi all, just need help on my portable DM4 after replace 1TBHDD and unable to start and enter the bios.

  Help, please.

  Thank you & appreciated

  

• Foglight - won't start not

  All,

  I just installed Foglight on CentOS 5.5 x 64, 3gigs, i5, lots of disk space. I took the default for the fms_silent.install installation except that I changed this path / opt.

  He has pulled up without errors and tracing the administration log server it is right here-

  2013-04-23 14:25:27.046 INFO [main] com.quest.nitro.startup.StartupConfigLoader - Forge Server commissioning using the HA Pooled Invoker port: 4446

  2013-04-23 14:25:27.046 INFO [main] com.quest.nitro.startup.StartupConfigLoader - Forge Server commissioning using the port of HA JNDI UDP Auto Discovery: 1102

  SELinux is disabled is the firewall. No idea why it won't start?

  Hey guys,.

  I did not open a case of pension since he was a lab/demo machine, I was put in place. I understand however, it turns out that was my typo in my hosts file. (once again, laboratory envionment, no dns server).

  Thanks for all those that Chorus.

• G580 - laptop won't start not

  I had purchased lenovo g580 core i3 a year ago. 2 days, after closing my laptop, when I tried to turn it on, screen appeared at the beginning, but not usual lenovo can't anything after that. It crashes without giving a answer... There is 2 option or press F2 for Setup and F12 for the boot menu. but nothing is happening, even when I press the buttons. someone help me please

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I suspect that your HARD drive has a problem, generally, it's like that, it won't start if the HARD drive was fried on you, try a key recovery to restore as long as day 1. Otherwise, buy a slap of casing 2.5 drive your hard drive inside, save the files after reinstall windows 8 or make the one key recovery.

• InDesign won't start not due to a lack of permissions to write in the settings file!

  My Indesign CC2014 won't start.

  I get an errorwindow saying "Indesign could not start because you don't have permissons writeing in the Indesign settings file. Correct the problem and restart Indesign. »

  Where is this file which is located?

  I have no problem with other CC-programs, they work very well!

  Someone has experienced this problem?

  See replace your preferences for folder locations and does not start under new inDesign CC | Adobe Community for instructions to set the permissions on the Mac. Procedure is similar on Windows.

• VMware Virtual Infrastructure Web Access won't start not

  Hi all

  I'm a little puzzled. Yesterday my vmware server 2 was working fine, but today it does simply not at all. Or rather vmware server seems to work, but web access won't start so I can't access it.

  I created a log of errors of the problem by changing the start of web access line in vmware-mgmt to send the log to a file instead of dev/null and the result which is attached to the file. I can't make heads or tails of it, but I hope someone can help me. I have re-installedvmware Server 2 times, but it does not help.

  The host is under ubuntu 9.04 and the guest is windows xp. As I said, everything worked without problem yesterday, but today it won't work/start.

  Hoping that someone will know what to do!

  Hello

  Perhaps with the failure, vmware server became unstable. Then put back in place a clean vmware server is necessary.

  To do this, all you need is to run ' vmware - uninstall.pl ' and then do a clean install using the script that I told you.

  Remove it and install check is all vmware remains of zombie process in running and kill them.

  You will not lose the virtual machine, but are always a good idea to make a backup. During the installation of vmware server all you need is pointing to the directory containing the files of the virtual machine.

  If you have problems with vmware vmware hostd.log and/var/log/vmware proxy.log after install the own reach and we will check.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• won't start not (2015, 13.6.1)

  Hello world

  I try After Effects and impossible to start. It instantly crashes on Windows 10 and starts to load on Windows 7 but then started clean and stop the startup with no message...

  My PC:

  -Windows 7 Professional (64 bit) and SP1.

  -Intel Core i5 (4 cores at 2. 4 GHz)

  -8 GB RAM

  -nVidia GeForce GT M 730

  Creating cloud Version 3.4.3.189

  After Effects Version 13.6.1

  It seems to be stop start after trying to load "unicode".

  Is there anyone around who knows what to do about it?

  All the best,

  Andy

  What is your screen resolution?

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.