Startup parameters

Similar Questions

• Missing icon in the bootcamp startup parameters

  Hello

  Installed Windows 10 the right way through Bootcamp with a bootable usb key and all that.

  Now I miss the settings icon where I chose this drive to boot from.

  All I get is El Capitan. No windows available.

  I know that I can hold down the Alt key at startup and choose the drive, but I want to have the choice in settings.

  It works fine the opposite effect. Windows to OS...

  Thank you

  / M

  What third-party NTFS software you have installed on the side of OSX?

• How to change the brightness of startup parameters?

  * Original title: brightness of starting

  Hello

  Some time ago I found a way to save energy by adjusting the brightness of the very small screen during the startup. But I do not remember how I did it and now I want it is canceled (because I don't want to have to increase every time I restart Windos).

  Sunday, February 15, 2015, 20:27:06 + 0000, ANDERS LINDGREN wrote:

  Hello

  Some time ago I found a way to save energy by adjusting the brightness of the very small screen during the startup. But I do not remember how I did it and now I want it is canceled (because I don't want to have to increase every time I restart Windos).

  See
  http://Windows.Microsoft.com/en-us/Windows/adjust-monitor-brightness-contrast#1TC=Windows-7

  Also note that the amount of energy save you during this short period
  is so small that they are negligible.

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Windows 8 freezes at startup.

  Hello

  I have a new problem with my Dell laptop. At the start of what Windows does not start successfully, I see the pot of time and after 5 minutes or if I get a dialog box saying;

  Title: Microsoft Windows

  Text in box: the application is not responding. The program can meet again if you wait.

  You want to terminate the process

  Two choices: complete the process & Cancel

  clicking on cancel and after 30 seconds I get the same box again

  By clicking on complete the process and I get a blue screen and then my desktop at the top of the page shows with no icons and placing the cursor on the bottom bar I see the pot of time.

  Result: nothing happens.

  Any advise?

  Thank you all.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums

  on known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  Dell PC Diagnostics
  http://www.Dell.com/support/Diagnostics/us/en/19/

  ==============================

  These can help - try first "automatic repair":

  How to run a "automatic" repair to solve problems starting Windows 8/8.1
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8/8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  How to start Windows 8/8.1 in Mode safe
  http://www.eightforums.com/tutorials/2757-safe-mode-start-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8/8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  ----------

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC of Windows 8/8.1
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8/8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8/8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8/8.1
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Force automatic startup of virtual machines

  I'm attemprint go configure virtual machines for automatic start. I chose the inventory - & gt; Configuration - & gt; Computer startup/shutdown virtual - & gt; Properties and I see "Startup" disable for all my virtual machines and that the "Edit" button is disabled.

  I am logged in as root.

  Do I need any specific authorization to change the startup parameters?

  I have to take any additional action?

  Concerning

  Marius

  He must choose the virtual machine and her you will have to use move up, so the maschine goes into the group for the automatic start

• Alienware 17 stuck in the Startup Repair tool

  iI has been stuck in a loop of repair, but I'm out of it by pressing F8.

  I'm still stuck at startup.

  After you press F8, the screen gave me four options to choose:

  "Press Esc for recovery."

  'Press ENTER to try again'

  "Press F8 for startup parameters.

  and

  "Press F9 to use another operating system"

  I tried the first three options, but they proved to be powerless,

  I pressed F9, causing the laptop to reboot, but it only led me to a black screen Uni.

  Run a diagnosis of material lying on the hard - F12 at startup disc to enter the Dell diagnostics.

• Lost on NB550D-109 wouldn't boot OS boot file

  Hi I have a problem,

  I lost my initialization file. I did not make a recovery disk.
  I've a tosiba netbook nb550d-109 without an optical device.

  This is the message I get:
  Faile of Windows to start. A recent material odr software change could cause EIB. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD
  Status: 0xc0000098
  Info: The Windows boot configuration data file does not have a valid OS entry.

  Maybe someone can help me. Probalbly in German?
  Thank you very much.
  o 1975

  Stand by.
  You can enter the boot advanced using F8 at startup parameters?

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).

• How to access the start menu? F10 is ignored. ESC is ignored.

  I have a HPE175z running a new installation of Windows 7 Home Premium.  I want to change the startup parameters.  When the system boots, the screen tells me that < F10 > give me access to the configuration.  F10 is completely ignored.  A message tells me later < ESC > will give me access to the Start Menu. < ESC > is also ignored.  Similarly, I have try all the keys are ignored - nothing interrupts the boot sequence.  How can I access the start menu?

  The problem is that no key during the boot stopped the boot process and allowing me to enter the installation or startup configuration.  I swapped keyboards and the problem disappeared.  Apparently, the keyboard did not have during the boot sequence.

  Thanks to all those who had a suggestion.

• Pavilion a1250n: cannot use 4 GB of memory on 64-bit operating system

  I resurrected this PC to give to my grandson, so I added 2 GB more memory.

  But when he starts, he sees only 3 GB.

  The configuration of the BIOS shows all 4 sticks of 1 GB.

  I ran the test memory Windows startup, and it shows all 4 GB and it extracted all OK.

  But, the properties of PC watch 4GB installed, 2.75 GB usable.

  I confirmed that Max Memory has been disabled in the MSCONFIG startup parameters.

  Googling has provided advice to set up activate Memory Remap in BIOS - but there is no such setting, in fact, there are NO parameters associated with the memory in the BIOS.

  I am running the latest version of the BIOS - there is no update.

  I use an add-in video card GeForce and hoped there will be a setting in the BIOS to avoid system memory allocated to the integrated video chipset, but only focus on the video entry is to choose what video is the main, and I already defined on PCI - E.

  I am at one loss as to what else to do...

  Hello:

  What you see is probably normal for a PC with an AMD chipset this old.

  I know for a fact that on a desktop computer Intel, you must run with a chipset 965 or newer which takes in charge of 8 GB of memory or more, so that Windows to "see and use" 4 GB of physical memory.

  These PC that can support 4 GB memory shows the same amount of memory usable net as a 32-bit operating system.

  There is nothing you can do about it.

  I guess the same goes for AMD platforms... you probably have a PC with a chipset that can take over 8 GB or more memory on order for Windows to "see and use" all of the 4 GB of physical memory.

• New Satellite A300-14R frizzes in installing or using an application heavy

  Last week, I received my Toshiba Satellite A300-14R it al seems to work, but by installing or using a heavy application, the frozed just for laptop and I had to reset the computer. This happened a lot, then Saturday night, I installed Winrar or something while I was listening to music and it happened again, but I could not always reset the laptop so I took out the battery and the laptop could not resume. So I decided to send it to the dealer, he gave me a new.

  So, today, I received the new book, began installing new things and the forzed of the screen. I realized a picture with my phone to show what is happening on the screen.

  http://img232.imageshack.us/my.php?image=22102008132pn7.jpg

  What should I do? I've updated everything in Vista.

  Sorry buddy but you're laptop computer real destroyer. ;)
  Of course, it's just a joke!

  Stand by. Such screen appears from the first second when you start your laptop?
  What happens if you install Vista using F8 and repair my computer in advanced startup parameters?
  The same thing again?

  Anyway, bring it back and ask for Exchange. This certainly isn't normal behavior.

• Very unusual behavior of Satellite L750D-14R

  One of my kids has a portable Satellite L750D-14R and a couple of weeks complained that the laptop was slow. It * was * slow - it took 10 to 15 actual minutes just to load of minecraft, and then the game was unplayable because it was so slow. He already had 6 GB of RAM. To try to fix it, I reinstalled Windows 8 (when we bought, it came with windows 7 and I upgraded to 8.1 Windows), all system updates and the windows update 8.1.

  He seemed to be okay, at this point, faster. But he began to blue screen regularly, as every time it has been used. I tried to reinstall another, this time by installing Windows 8.1 directly. I made all the system updates etc and he began to blue screen. At that time, I had already spent a lot of time trying to fix it. This time, I went for the nuclear option full-on and completely formatted the disk including the removal of all partitions. There are 3 partitions, a very small recovery partition and the system partition and data. I thought I wouldn't need recovery - if there were any problems I could format and reinstall again. So I amazed all the scores and grouped into a single partition on the disk.

  The laptop is now completely unusable. With the HDD Toshiba original (freshly formatted) installed the laptop starts just directly to a blue screen that says:

  "Recovery, your PC needs to be repaired. The application or the operating system could not be loaded because a required file is missing or contains errors. File: \WINDOWS\System32\winload.exe
  Error code: 0xc000000f

  You will need to use the tools of recovery on your installation media. If you do not have the installation media contact your system administrator to the manufacturer.

  Press ENTER to try again
  Press F8 for startup parameters.

  Pressing enter or F8 is simply the screen flashes for less than a second, then it goes back to the same message again. It tries to start, it shows not the BIOS or normal startup messages, or the Toshiba logo or anything like that.

  With a drive HARD new, freshly formatted, the laptop does nothing when I turn it on - entirely black screen with a cursor flashing at the top left of the screen. It does not boot to the BIOS, there is no system messages or logos, I can't type in the location of the cursor, it is just flashing indefinitely.

  It's as if there was something on the "valorisation" partition which stops users to upgrade the HARD drive or something - any player who does not have this 'special' recovery partition do not work, thus ensuring that consumers buy a new laptop when it grinds to stop instead of the upgrade. This may sound cynical, but I saw anti-mise at material level similar solutions in the past - Compaq PC used to have special notches plastic cast on optical drives, so that readers could be used in the frame of Compaq.

  Just to put things in context, I'm not a computer expert, qualified or not, or whatever it is, * but * I was an engineer office support for a very large company for a long time, a few years ago. I have built, repaired and updated hundreds of computers over a period of about 20 years, and in all this time, I've never seen a problem like this. What I mean is, I'm not a total computer novice! Usually a full format and reinstall everything except material patches broke, and it does not feel like a broken hardware problem.

  The laptop is 1 to 2 years. I'm sure laptops should last longer than that. I really don't want it's bin again. Is there something I can do? I can recreate this special anti-mise to partition somehow level?

  With a drive HARD new, freshly formatted, the laptop does nothing when I turn it on - entirely black screen with a cursor flashing at the top left of the screen

  The cursor blinking in the upper left corner is a typical sign of HARD drive / partition problems or memory problem.
  But HARD DISK must be check at the first stage.

  According to your message, you could reinstall Win 8 on this HARD drive...

  I recommend you install Windows system once more after the HARD drive has been formatted.
  The best choice would be the use of the support of recovery Toshiba (disk) which allows you to reset the phone to factory settings, but I guess that you have not created this record in the past. Right?

  Well, if you need this disk, you can always order the middle of Toshiba Arvato serice.
  More I would recommend checking the HARD drive using some 3rd party software such as
  Drive Fitness Test (google for free download)

  As mentioned, next to the potential problem of HARD drive, the RAM might be the troublemaker...
  Then you should also consider the RAM check or replacement of RAM...

• Access to the Safe Mode on Windows 8

  Hello

  I understand sometimes through troubleshooting or for other reasons, there is a need to access safe mode when using windows 8. What many people do not know is Windows 8 does not use F8 at startup to access the secure mode. It needs to be done inside of Windows 8, himself. The screenshots below will show you how to access safe mode when you use Windows 8.

  On the startup screen, click settings:

  

  Then click on change settings for PC:

  

  Click gernal on the left side of the page:

  

  On the right side scroll advanced boot:

  

  The computer then stops, and you want to click on troubleshoot:

  

  Click on advanced options:

  

  Click startup parameters:

  

  You will then see a page that lists information, click Restart on the right:

  

  You will then choose which environment you want to connect to:

  

  I hope this information is useful

• Error initializing C470 1962

  Hello

  has obtained a C470 with a strange boot problem.

  whenever the machine is running, you receive the following error message:

  1962 error: no operating system found. Boot sequence automatically repeated

  Sometimes Windows 7 starts just, sometimes it starts after a few repetitions. This is a random behavior, and it does not change a thing if it's a cold start or just reboot.

  So that's what I've tried so far:

  1. update of the bios

  2. adjustment of the installation by default, configured and tried different startup parameters

  3. re-installed the bootloader

  4. has conducted an audit of health SSD, everything is OK

  5. replace SSD by one of a different brand

  After the first step, I was able to start for over 20 times without any problem. After that, the problem came back :-o

  The system worked for more than a year without any problems. There is also another machine with exactly the same configuration that always works.

  All the other things I could try?

  Thanks for any help

  I solved the problem by replacing the properitary S - ATA standard S - ATA cable cable. I had to weld another connector of power for the existing S - ATA power cable.