Startup Repair will continue to run on windows vista

Similar Questions

• Windows vista Startup Repair will not stop running

  Hi hope someone can help

  When I boot computer it goes to startup repair and custom automatically stops running same thing that happens when I use safe mode. Recently, we used the system restore, it worked fine until we used the Startup Repair
  Thanks for any help you can give

  Hi, Gretaevan2,

  Thank you for visiting the Microsoft Vista answers Forum!

  * If this happens even in safe mode, then it is possible that the hard drive is the source of the problem.

  You can try the following steps:

  STEP 1: Try to perform the disk check and see if there are errors.

  See the following knowledge base to perform the disk check: http://support.microsoft.com/kb/315265

  STEP 2: Try the SFC Scan now.

  See the following knowledge base to run SFC Scannow: http://support.microsoft.com/kb/310747

  If, in case, the step above does not help, try to perform the system restore to an earlier date when everything was working well.

  We can't wait to hear back on your part.

  Best regards, Vishal B. Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• How can I get the world of warcraft to run on windows vista without it asking permission to sontinue all the time?

  I can't get this game to run without windows vista asking "If you started this program, click continue" and my desktop icon has the small shield thing on that window.  How to get these two things go away?

  Hello

  Read about how the programs were not writtern properly for vista by the creators of the program

  read the information below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/i-want-those-admin-only-shields-off-my-desktop/e9e39d96-8156-475A-B456-d2dfdbb08b8c

  and also read this information

  http://www.vista4beginners.com/disable-UAC-for-certain-applications

  for all other games information ask in the forum games link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-gaming?page=1&tab=all

• Defender pro runs on Windows vista basic?

  Defender pro runs on Windows vista basic?

  Vista Defender Pro is a name used by the fake Antivirus

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

• IF INTERNET EXPLORER 8 WILL SUPPORT MY LAPTOP HAVING WINDOWS VISTA HOME BASIC LICENSE

  IF INTERNET EXPLORER 8 WILL SUPPORT MY LAPTOP HAVING WINDOWS VISTA HOME BASIC LICENSE

  SAY BY EMAIL

  Internet Explorer 8 works fine with Vista Home Basic.  You should have no trouble with the upgrade.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows start error - Startup Repair rises continuously

  When I start my laptop with windows vista home premium, when I start computer, seek compensation, permanently and I a not able to recover the system with repair restore, startup startup it's launched, after that, I tried to install bluetooth driver software.it has been a success and started problem mentioned above. I tried to start windows in safe mode, by pressing F8, but agin system asking stat repair. Please sugest asolution.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• CS6 will install and run on Windows XP Service Pack 2

  We no longer seem to be able to deactivate/activate CS3 on our system. I assumed that this is to do with our network or firewall settings.

  As an alternative, I have watched the replacement of our licences of CS3 with CS6 long but note that the requirements in Service Pack 3 on XP.

  It will install and run the Service Pack 2?

  Adobe has never taken care of XP 64-bit. You try to run software designed for XP-32 bit SP 3 on 64-bit XP SP 2. With Microsoft, abandoning all support and updates for XP in the following months, it seems that the right time to upgrade. You try to run the software CS 6 will be an exercise in soymeal.

• How can I prevent the Foxfire loading automatically when I turn on my computer which runs on Windows Vista?

  Foxfire load automatically when that I start my computer after all the other essential programs. I would like to know how to disable the start menu link that allows the program to load when the computer first starts because the Foxfire browser is not necessary when I first start the computer. Furthermore, when I first start my computer, it is not necessarily connected to the internet and it's just a little embarrassing to see foxfire charge when it is not necessary. In addition, it takes up valuable memory in RAM when it's running, so slow down my machine. Please, someone show me how to keep this program to start when I start my computer. Moreover, my system is Windows Vista and Foxfire does not appear in the startup folder. Only by going to clicking on Foxfire default program page it does not show that Foxfire has a hidden defect that makes it to launch at startup of the computer. What I'm looking for must not see when I start my computer.

  Firefox has no opportunity installation to run at startup, you can check the different methods that Windows uses to launch programs. For details see

  • http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

• How do itunes run on windows Vista?

  I used to run Itunes on my windows Vista computer. Recently, my computer crashed. I did a clean reinstall of windows Vista and downloaded Itunes again after that. Before installing, I saw that I would get a version for XP and Vista, so it should be the correct version.
  However, on trying to install it, I got a message that itunes works only on Windows 7 and more. How to run again?

  The most recent (and probably final) version of iTunes which takes supports Windows XP 32-bit and Windows Vista 32/64 was issued in September 2015. It includes support for iOS 9, although not Apple music. The Apple software update, it will not necessarily be looking for you and may ask you to update when you are not. The iTunes download page can't give it to you or the other.

  • 12.1.3.6 iTunes for Windows (32 bit) - iTunesSetup.exe (2015-09-16)
  • 12.1.3.6 iTunes for Windows (64 bit) - iTunes6464Setup.exe (2015-09-16)
  • 12.1.3.6 iTunes for Windows (64-bit-for older video cards)- iTunes64Setup.exe (2015-09-16)

  See troubleshoot problems with iTunes for Windows updates if you have problems with installation, or for direct links to the current or other recent versions.

  TT2

• IM buying a game on amazon, and beside it, it says windows 98, me, xp if it runs on windows vista?

  Help, please

  Relay 100% on information from Microsoft Compatibility Center. There is one important thing that you can check yourself. You can download the demo of these games and see can they work with Windows Vista. If I remember, I installed and played carefree in Railroad Tycoon 2 on Windows Vista.

  Here you will find demos of these games:

  • Railroad Tycoon series
  • Rollercoaster Tycoon series

  If they do not work with a normal installation, you can try to install and run them in compatibility mode:

  1. Right-click on the file that starts the installation, and then select Properties
  2. Select the compatibility tab
  3. Check the option run this program in compatibility mode for , and for example select Windows XP
  4. Click OK
  5. start the installation by double-clicking on this file (sometimes they must be run with administrative privileges, so double-click it but right click on this file and choose run as administrator )

  You may also do this for a file that runs a game. After a successful installation do exactly the same steps for a file that runs a game to run it in compatibility mode.

  ...

  One last thing. I mentioned Railroad Tycoon 2. If you were talking about Railroad Tycoon 1 that was created for a BACK, you may need to download special emulator BACK that allow you to run this game. Download and install the emulator back from here: http://www.dosbox.com/ this one I think is the most popular (if I remember that I've also used) > launch game using the emulator back (somewhere, you will find information how to do this). In this way, I launched a few really old game, as the Park theme and Desert Strike.

  Much more information on dosbox, you can find on their site wiki: http://www.dosbox.com/wiki/Main_Page

• Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

  My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

  Hello

  This Dell 2000-0146 error code is for a failed hard drive / failed.

  You will need to replace and reinstall the operating system.

  Save your data as soon as POSSIBLE.

  See you soon.

• I get a bluescreen BCCode: fe. running on Window vista service pack 1.0.

  Hello

  I get an error bluescreen BCCode: fe.

  Problem event name: bluescreen

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 18441

  BCcode: fe

  BCP1: 00000008

  BCP2: 00000006

  BCP3: 00000005

  BCP4: 879745E0

  Window vista service pack 1.0.

  Product: 768_1

  Appreciate your help from the community of MS... Thank you.

  Bryan

  1 Cup start-up, you have 2 malware applications running (never a good idea) McAffee and defender. (if I were you I would remove both and install MSE)
  2. also, on startup, you 37 things (including HP bloatware) from.  Who uses the resources and makes possible conflicts.

  3 - your 2 DMP files have 2 distinct causes. First USBHUB. SYS and your video driver/subsystem.

  For the USB problem, run a file system check

  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833

  For the issue of the video

  
  "Is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.

  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.

  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.

  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

• Unable to turn off the computer, it will restart every time in Windows Vista.

  Original title: portable computer complete crash

  I am running Windows Vista Home Premium on HP Pavilion DV2208e.
  A week using Adobe Photoshop Lightroom, the screen went black and all the lights on the laptop has continued. I tried to stop the laptop by pressing the power button, but it did not work. The only way to stop the laptop was to unplug the power cord. The next morning, that I started it again, with a notice "Windows did not close properly, how you want to proceed.» I opted for "start Windows normally". It seems to work very well, with the expection that the date had re-fixed at the date where Vista was installed first of all a few years ago. Later, when I tried to stop the laptop by choosing from the menu start 'Shut down', the laptop shuts down normally, but then 2-3 seconds more later handed on himself. I tried several times and it's always the same, the way to stop it is by pressing the power button, then whenever it restarts it new note that Windows not stop correctly. Also the black screen crash turned up almost every two days.

  I tried reinstalling antivirus and did a full scan. Also used ccleaner and décliqués "Automatically restart" in the advanced system settings. But nothing seems to have worked so far.

  In computer management, I can see critical events that seem to correspond to the time when the black screen error occurred. They say the following:
  The last sleep transition was unsuccessful. This error can be caused if the system unresponsive, failed, or loss of power during the transition from sleep
  Log name: System / Source: Kernel-Power / event ID: 41 / level: criticism / user: SYSTEM / OpCode: Info / task category: no / keywords: (2)

  Help, please...

  Hello

  It seems that the problem is related to hardware. I'm offering please contact the manufacturer of the computer (Hp) for material assistance.