'StatBlockCalc' Warum nicht works
Hallo zusammen,
My question ist ganz kurz. Warum StatBlockCalc Funktion in meinem Programm nicht I Betrieb?
In loop-loop shows immer same result (maximum/klareren den Wert der first operation).
Danke
Hello J.Huang,
Wenn ich das richtig sehe, einem blockweise Kanal Die Gabriel zwischen Min und Max berechnet werden soll. Wenn das richtig ist, dass man das losen so:
Dim iLoop, iLoopRes, max_360, min_360, delta_360, oResChn, iStepWidth, iChnLen
Set oResChn = Data.Root.ChannelGroups (2). Channels.Add ("360 ° _peak_CCW", DataTypeFloat64)
iChnLen = Data.GetChannel("[1]/evaluation_torque_CCW"). Size
iStepWidth = 31448/2
For iLoop = 1 to 23
StatSel (iLoop) = 'No '.
Next
StatSel (4) = "Yes" ' Minimum
StatSel (5) = "Yes" ' maximum
StatClipCopy = 0
StatClipValue = 0
StatFormat = «»
StatResChn = 0iLoop = 1
iLoopRes = 1
Do
Call StatBlockCalc ('Channel', str (iLoop) & "-" & str (iLoop + iStepWidth), "[1] / evaluation_torque_CCW")
val = max_360 (StatTxt2 (5))
val = min_360 (StatTxt2 (4))
delta_360 = max_360-min_360
delta_360 = round (delta_360, 4)
oResChn (iLoopRes) = delta_360
iLoop iLoop + 500 = ' index add 1 for the next loop
iLoopRes = iLoopRes + 1
' Loop until (iLoop > = iStepWidth / 2) ' bis akt. Kanalposition > iStepWidth / 2
Loop until ((iLoop + iStepWidth) > iChnLen) ' Kanalende bis
Gruss
Walter
Tags: NI Software
Similar Questions
-
Hello
ICH haben einen iMac end 2015 mit 32 GB of RAM. Heute habe ich mit dem Korrekturpinsel die areas, welche durch den Weissenabgleich noch einen Blaustich hatten freigestellt. Mit einem bad works der Korrekturpinsel nicht mehr. ICH habe den Mac zwischenzeitlich neu gestartet, trotzdem nicht works.
Einstellungen:
Weiche Kanten = 0
Fluss = 100
Dichte = 100
Weiss someone woran liegt, dass der Pinsel mit einem bad nicht mehr und wie man wieder zum Laufen brings also works?
Viele Grüße
Felix
Hello
Have you tried clicking reset located in the bottom right of the adjustment brush Panel.
Thank you
-
Ich das Programm dringend auf einem neuen Rechner installieren would. Die nicht works Seriennummer
André
You must contact Adobe Support by chat or phone when you have the serial number and activation problems.
Here is a link to a page with options to help make contact:
-
ICloud established nicht works
Windows 10
I have cloud installation:
Following Fehlerreport erhalte ich:
Your configuration branch eines mountains Fehlers nicht gestartet werden konnte.
Fehler: 0x80070005: CopyPSTFoldersToCache
Fehler: 0x80070005: CopyFoldersToCache
Fehler: 0x80070005: ZebraBootstrapTool::CopyContactsToCache: Kontakte
Fehler: 0x80070005: CopyMessagesC failed
ICloud deinstalliert und installed
Office deinstalliert und installed.
Nichts geht
Sehen Sie, wenn dieser Artikel helfen konnte - https://support.microsoft.com/en-us/kb/968003
-
Hallo,
ICH habe zwei Abos... Eins und eins as InDesign Illustrator as. ICH möchte nun auf ein Komplettabo für die ganze Suite umstellen. ICH folge ganz exactly
dialog box, nur das bei mir nicht das Produkt mit dem blue button "Abo umstellen" wird auf dem offered. Woran kann das liegen. Wie erreicht man bei Adobe actually jemanden?
Hi FSteinert,
Please Contact Customer Care for assistance and information.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
-
Hallo,
Mir hab ich die Testversion von Adobe Captivate 8 installed. Adobe Captivate kann nicht gestartet werden.
Könnt Ihr mir bitte helfen, was die of Chinese breast kann.
VG
Felix
Please check to see that your computer meets the minimum requirements: system requirements
These links may be useful:
Adobe Captivate learning & support
Guinot
-
Nicht works InDesign Folio Vorschau
Hallo zusammen
Wir haben auf Systemen in Windows 7 (64 bit) die neue CC2014-Suite von Adobe installed. IM Installationspaket included sind auch die DPS-Tools, welche den Desktop Content Viewer should be included.
Wenn nun im Folio Builder von InDesign 2014 die Vorschau eines local Folios angeklickt wird kurz green message, dass der Artikel Länder wird die. Danach passiert nichts mehr. Die Vorschau EIB local SMS sich auf dem Computer nicht Folios. In line-Folios können unter digitalpublishing problemlos. Acrobat.com open werden.
Als eine Neuinstallation der DPS-tools (DPS Desktop Tools for InDesign CC (2014)) hat ebenfalls nichts gebracht.
Noch sonst Hat someone das problem? Weiss someone, wie man prufen kann, ob der Desktop Content Viewer extension installed ist?
Vielen Dank fur Eure Hilfe.
Gruss
Andreas
See http://helpx.adobe.com/digital-publishing-suite/kb/manual-install-content-viewer.html
Neil
-
ICH habe flash cs6 installed und die hilfe nicht works pro
KT
ICH thank F1 und nichts passiert...
Windows 7 64 bit alles standard
-
Behance zusatzmodul works nicht
ICH habe das das problem in mein CC2015.2 mein Veroffentlichungsdienst "Behance" nicht works Lightroom. IM LR-Veroffentlichungsmanager wird mir displaying das das Zusatzmodul "Nil" nicht ist oder nicht richtig works installed.
ICH finde aber keine possibility dieses Modul neu zu installieren.
WER kann mir helfen da?
Gruss
Dirk
Hi Dirk,
Behance plugin is no longer available in Lightroom CC/6. It has been deleted.
-
Warum ich kann nicht installieren Adobe Acrobat Pro XI (Testversion)?
Hallo, ich versuche seit days GDPdU, auf meinem Rechner put Produkt zu installieren. Download Assistant der bleibt nach der Anmeldung und man kann nicht das Produkt details are. (Kann das Foto yesterday leider nicht einfügen.)
ICH use Google Chrome, Windows 7. Games Speicher habe ich auch.
Thank you as your Hilfe
Roswitha Rudzinski
Wieso works are auf dem notebook aber auf dem PC're nicht works? Auf dem Bild sehen Sie, dass ich keine Bilder einfügen kann emission. Auf dem another Bild sehen Sie den DownloadAssistenten - aber kann leider das Programm nicht Park. ist das vielleicht ein PC-problem (Einstellung?). Wenn ja, wie kann ich das beheben problem PC?
Gruss
Roswitha
-
Mein Rechner (baujahr 2006) works only mit 1.49 Ghz.
Kann das die of Chinese breast, dass die neue Flash Player Version 11.1-die 1.6 Ghz haben, nicht works?
Hello Pat,.
danke für die set.
ICH habe working in einem einen Forumsbeitrag other points found
und der Flash Player "works" wieder.
'Extras' waren unter add - on deaktiviert.
MIT besten und danke managed thanks.
Peter
-
With the help of StatBlockCalc on channels separated
I use StatBlockCalc on several channels to give me a new channel of all the minima of each channel in my DataSet. The call looks like this
Sun Dat
"Dat is used to set the list of channels when you don't know the number of groups
Dat = "" [1] / CH1_min'-' ["& GroupCount &" ' "] ' / CH1_min'" "Call StatBlockCalc ("Channel", "1-", Dat)
It works when there is only one channel in each group. However, I have now 2 channels in each group, and I need to create the new minima channel separately.
Any ideas how I can do a StatBlockCalc on separate channels in an undetermined number of groups?
In collaboration with one of application engineers, we came up with a solution. Basically, I'm building a chain of the CNo() of each of the channels I want and sent this string to the StatBlockCalc function. Works like a charm.
DAT = «»
For j = 1 to groupCount
Chnum = ONC ("[" & j & "] / Ch1_min")
If Chnum > 0 Then
DAT = Dat Chnum & & ''
end if
nextCall StatBlockCalc("Channel","1-",Dat) '... StatDirec, RowNoStr, ChnNoStr
DAT = «»
For j = 1 to groupCount
Chnum = ONC ("[" & j & "] / Ch2_min")
If Chnum > 0 Then
DAT = Dat Chnum & & ''
end if
next -
Fehler 148: 3, Photoshop kann nicht mehr gestartet werden
Fehlermeldung 148: 3, Photoshop (CS4 under Windows 7) kann nicht mehr gestartet werden. Weiss, wie man den Fehler behebt someone. MIT deen Anleitung von Adobe "licenseRecovery109.Zip = LicenseRecovery.exe hat es nicht works very.
Error 148: 3 https://forums.adobe.com/thread/375447
-
Hallo,
ICH habe ein problem beim autorisieren meines computers in ADE. Obwohl ich mich mit meiner Adobe ID ganz normal join kann und mir vom online grant insured würde, dass die ID ganz normal works, kann ich damit meinen nicht autorisieren Computer. Standig erhalte ich Fehlermeldung die: 'once-ID/Kennw. f. ausgew. eBook-offerers ist please. Rubis to. "Dabei sind alle Daten town.
I had problem once schon das. Damals had ich mich an den grant gewendet und nach einem Neustart hat das join works. Depending on ich die Adobe ID charged habe, um ein Buch read zu können, hat wieder nichts works great. MIT keine der beiden Adobe-IDs.
Setzte das password back and letter Zahlen und nur das bad. Dann versuch are still wrong.
-
Photoshop and Lightroom starten nicht (0xc000001d)
Hallo!
ICH habe heute mein Windows neu und wanted PS Lightroom neuinstallieren und mein aufgesetzt.Leider lassen sich both program nicht öffnen. Weder die die cloud uber creative noch über Verknupfungen und selbst nicht als administrator. ES kurz und dann auf hort lad.
Eine mehrmalige verhindern versucht habe. Nichts works.
Out ich following Fehlermeldung Mittlerweise: "Die exception"unknown software excpection"(0xc000001d) ist in der application an der Stelle 0xe4ec6cd5 aufgetreten.» Klicken Sie auf OK um das Programm zu exit! »
Wie kann ich diesen Fehler beheben und mein Photoshop and Lightroom use weiter?
Liebe Grüße!
I could solve the problem by myself. An error report opened and showed exactly what was wrong.
I had to install the new version of Microsoft Visual C++, now everything works fine! Thanks for the help.
Maybe you are looking for
-
When I restarted in safe mode, everything worked fine, so I disabled the Add-ons and plug-ins, one at the time but could not find one any of them causing the problem.
-
What is the difference between the password and access code
I get all the IDs and passwords and none are accepted "I received message' iPad requires your password after restart", but it does not accept passwords What is the difference between the password and access code
-
Need of recovery for Equium A60 CD
I recently had a new hard drive installed in my laptop Toshiba, I also lost the restore CD, can someone direct me to a place I can buy the CD.Thank you very muchStefan fyfe
-
Cannot get epson PX710W printer driver to recognize
I downloaded the correct driver and software for my own site of Epson printer (cannot find the original disc). By the time we reach the driver download windows gives the message 'not safe to download' and will not allow the installation of driver.
-
I can ' t find my graphics driver HP 15-n034SO
Hi, I recently bought a HP 15-n034SO and replaced to original HDD with a ssd and installed windows 7. I am now almost finished downloading all the drivers separately, but I still miss the integrated graphic card which is supposed to be: drivers of AM