State of ink level HP psc 2110 all-in-one

Similar Questions

• HP psc 2110: a pulse mode, nothing works well in this mode for my psc 2110 all-in-one.

  Get this second puosating soundevery, and the printer is frozen.  In the past I have reset in unplugignthe power and then hoding the arrow buttons cancel and right and the pluging in the power sometimes it works.

  Hello @johnny1936,

  Welcome to the Forums of HP Support!

  I understand that the printer HP PSC 2110 all-in-one is frozen and making a frequent pulsing noise. I would like to help you to solve this problem today. Currently, there is probably a problem with your product, power or a Firmware programming problem occurring within your printer. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please connect your all-in-one PSC directly into the wall outlet for power. Power strips and surge protectors can cause your printer for lack of power and will not work properly. Once your printer is plugged directly into the wall outlet test your printer to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: Power Reset:

  1. With your printe r WE, please unplug the power cable from the back of your printer
  2. The power cord unplugged for 1 minute
  3. After 1 minute the back power cable plug in
  4. Your printer should start up on its own

  Once the printer lights please test your product in order to confirm that the problem has been resolved. If the problem persists, your product may experience a failure of Firmware. The Firmware is the internal "brain" of your printer. It determines what your printer is and how your printer it. If the firmware is corrupted in your printer, it may cause performance problems. Normally, I would have you update the Firmware on your printer. If the problem persists after the update is complete, will allow us to complete a programming reset the printer. However, due to the age of your printer there is no Firmware updates or resets the programming. Therefore, a replacement product may be necessary if this problem persists.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if you see all the solid or flashing lights or message board on your printers. I look forward to hear from you!

• PSC 2110 all-in-one now prints VERY SLOW

  Maybe I just need to bury it, but my psc 2110 started extremely slow printing - 15 minutes for the align cartridges page, 17 minutes for the 'self-assessment report.  So, it has nothing to do with the connection between the printer and the computer (these prints are of the printer itself).  I tried unplugging everything, wait, and plug it in; Remove and reinsert the ink cartridges; align the print cartridges; Download the HP printer utility (who reported "No problems found"); looking for an update (it says I have the latest).  Any ideas?

  If the printer prints a swath, and then pauses for 15 seconds before the next broke then probably the issue is one of the ink cartridges has failed.  If the PSC 2110 is capable of printing mode reserve (with one of the removed cartridges), then you can remove a cartridge, print something, then replace the cartridge, remove the cartridge else and print something.

  Whatever that cauese cartridge the printer to print slowly is the culprit and should be replaced.  If the PSC 2110 does not support the mode of the reserve, then you will have to use trial and error to find out what cartridge is at fault.  I would like to start with the black cartridge.

• printers HP psc 2110 all-in-one

  Past from windows xp to 7. My printer will not scan. Message "no scan option. You need to install or run HP software for the feature.

  Hello Randi1947,

  Welcome to the HP Forums!

  I understand that you are unable to scan a document using the PSC 2110. Unfortunately, with the operating system that you currently have, does not contain a complete software functionality. You can only perform a Windows Update on your Windows 7 computer. This information is declared here.

  In this document from HP, it states that certain functions are perhaps not available. Given that your scanning capabilities do not work, there are solutions that you can try. Click the HP document, and then click on 'how to scan, fax, print or use a memory card.

  If you have any other questions, please let me know.

• PSC 2110 All In One: PSC 2110

  My Dell laptop (Windows XP) and PSC 2110 worked great until recently. The printing process stops just after it starts, then some rattling noise, like snapping plastic come from the printer. I have turned off and on again, I uninstalled and reinstalled the printer several times. I tried to use printing HP and doctor Scan that did not help. I tried updating the driver, no luck.

  Any ideas?

  Hi @MattU12,

  Thanks for getting back to me.

  Let's try a different approach and troubleshooting from a software point of view.  Try the following steps:

  Delete temporary files on your PC

  1. Click on Start and then run.

  2. In the text box on the run window, type%temp% , and then click OK. A folder full of files and other folders will appear.

     All the folders and files that you see in this Temp folder are no longer used by Windows XP and can be deleted safely.

  3. To remove files or individual files, hold your Ctrl key while clicking on each item you want to remove. Release the Ctrl key when you are finished.

     To remove these items, press your delete key or choose file , then delete from the menu.

  4. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  5. If you want instead to remove everything inside the Temp folder, choose Edit and then select all from the menu.

     Note: If you are prompted that there are hidden files in this folder, simply click on OK to dismiss the message. A few hidden files hanging out in the Temp folder probably aren't significant enough to worry about.

  6. Now that all the files and folders are selected, press your delete key, or choose file , then delete from the menu.

  1. Confirm that you want to delete the files by clicking Yes in the window to confirm deleting multiple files that opens.

  2. After all the files have been deleted, you can close the window and empty your trash, permanently remove the files from your PC.

  Tips:

  1. You may receive a message error deleting file or folder , while files are deleted. It simply means that one of the files is used by a program right now. Click OK, close all open applications and repeat the steps above. If you still receive the message, try restarting your PC and repeating the process again.

  Source

  Then, stop and restart the print spooler:

  1. Click the Start button, select run.
  2. In the Run dialog, type "cmd" and click OK.  
  3. In the command prompt, type "net stop spooler" and press the enter key to stop the spooler
  4. Then, type "net start spooler" to restart the spooler.

  If the printing problem persists after that, click on click here to find out how to disable your Windows systems via MSCONFIG Services to determine if there are programs or services interfere with your ability to print.

  I would like to know how it works for you.

  See you soon,.

• Remove and check cartridges appears on the screen of the printer HP PSC 2110 all in one

  printer does not print, I'm ink? Can't wait to buy cartridge if I don't have a need. Thanks for the help AL

  Hi AL SEGAR,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Contact the manufacturer and get tested or replaced ink cartridge.

• maintenance/cleaning of hp psc 2110 all-in-one

  My printer needs cleaning inside... Best Buy is no longer performs cleaning & maintenance on printers. any idea where I can take my printer (dealer, etc.)?

  There is no authorized dealer, or repair technicians that I know, but you might be able to find a "mom and" pop shop who will clean up the printer for you.  I'm sorry.

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• HP PSC 1510 all-in-one: ink cartridge for HP PSC 1510 all-in-ONE - no dealers found

  Hello

  I am looking for black HP 92 (C9362W), but your body just says there are no resellers found. Is - this saying that I can not find this cartridge can? If Yes, what ink cartridge can use HP PSC 1510 all-in-one model?

  Thank you

  Erika

  Hello

  Please try (Canada):

  http://www.shopbot.ca/pp-HP-C9362WC-compatible-price-133571.html

  http://www.shopbot.ca/pp-HP-C9362WC-HP-price-35399.html

  http://www.myprintershop.ca/HP-c9362w-92-ink-inkjet-cartridge-black.html

  Kind regards.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• Printer HP PSC 2355 all-in-one cut at the bottom of all the letters and numbers.

  I have a HP PSC 2355 all-in-one printer and use Windows 7 Home Premium 64-bit.

  When you print documents, the bottom of the letters and numbers do not print.

  Hello techphobic

  I'm glad that you have solved your printing problem. If the problem recurs, do not hesitate to post back.

  As a possible explanation, looks like you had a faulty cartridge or the low ink level. Part of solving the problems of print quality is to try another cartridge that you already have and it resolved the problem. A cartridge bad or low ink level can cause horizontal stripes in images either because it doesn't have enough ink or it has problems, releasing the ink. If the lower part of the page is cut off, then it looks like the cartridge's ink.

  I mentioned the notebook because it is a very basic application that you can print from. Sometimes printing problems are specific to a particular application and printing from Notepad allows you to isolate the problem. As a dedicated article for printing from the Internet problems, I wanted to narrow the problem to the right Internet printing.
  Problems printing from the Internet

• problem of download/install HP psc 2355 all-in-one driver

  With the help of the operating system of windows xp with service pack 3. Printer model hp psc 2355 all-in-one. When the driver download/install is done I get the pop-up window

  2.5 FEAD OPTIMIZER.

  "The device is not ready".

  File:C:/Temp/hp_web release

  Error code: 21.1812.01.2.25016

  Please send error to [email protected]

  Using the USB connection method.  I had my computer repaired by Geek Squad and need to reinstall my printer driver. Any help much appreciated. I tried all that I know is not much.

  Hello

  This message is related to the downloaded package that comes with the setup of the netopsystems.com created install creator.

  Solution:
  1. perform an uninstall of level 3.

  1. turn the all-in-one off and disconnect all cable USB/Ethernet of all-in-One to the computer.

  2. Insert the CD-ROM of all-in-one in the computer. Cancel any windows installation that appear.

  3. click on start in the bar of tasks and then run.

  4. in the command box, type command, and then press Next:

  X:\Util\CCC\Uninstall_L3.bat

  (X: is the drive letter of the CD-ROM the CD-ROM of all-in-one is in, if the CD-ROM drive letter is "the command must be D:\Util\CCC\Uninstall_L3.bat)

  2. use the Windows Cleanup utility and remove all entires of netop software systems or HP AiO

  This is the web link to download the "Windows Cleanup utility".

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Below listed Remove HP related entries if they are registered.

  The HP Imaging device functions
  Documents HP Viewer
  HP Photosmart Essential
  HP Image Zone
  Gallery HP Photo and imaging
  HP Photosmart, Officejet, Deskjet, or Scanjet, (with the name version number and product software)
  The HP software update
  HP Share on web
  HP Solution Center
  HP Director
  HP memories disc
  Greeting Card Creator 32
  NOTE: Do not remove all the elements other than those mentioned above.

  3. download the package again and re-install.

  Here are the web l ink to download and install the all-in-one software for PSC 2355 all-in-one drivers

  FTP://ftp.HP.com/pub/softlib/software4/COL10513/OJ-30616-1/nn_rub_w01_Americas_Euro1.exe

  Installation instructions:

  (1) disconnect the USB cable from the back of the computer.
  2) double-click the downloaded file and install the all-in-one software, in the middle of the installation, it will prompt you to connect the USB cable then connect it and continue with the installation.

  In my view, these solutions have helped to solve the problem.

  Kind regards.

  Monalisa.

• Cartridges Stuck on HP psc 2210xi all-in-one

  I have a HP psc 2210xi all-in-one. When I turn it on, the ink cartridges get stuck on the right side of the transport, makes the machine a rattling as he wants to go, but does not work. How can I free cartridges, so they move backward on the transport? Under Windows XP. Receive no error message.

  Looks like it could be a blockage of the cart.  This give a try.

  http://support.HP.com/us-en/document/c00042632

• HP psc 2115 all in one color not printing on Mac

  Hello

  I have a MacBook Pro, OSX 10.9.4. It prints very well on my HP psc 2115 all-in-one in black and white, but not color. I tried to find an update for the driver here, but nothing helps. Is it just that the printer is not compatible with my operating system, or is there something more I need to do?

  Thank you very much

  We gladly invite you.

  Try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + left click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Once you have finished, click on the sign more and select the PSC 2115 list.

  Click on the drop down menu, then make sure the HP PSC 2110 is selected.

  Please let me know the results,

  Shlomi

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.