Statement by SSDX120G25 wildly different "amount used.

At this player for about a year. She just Windows 7 and Office as well as a few other things. Last week we learned suddenly full disk, which cannot be.

I deleted about 10G of things and it reported only 10 GB left. She's own calaculations, which was okay, but not mine!

Without removing me anything else, the next day it reported 25 GB of left, they day after it is reported 33 GB left and yesterday it reported 57GB left, that sounded finally straight.

Today, go back to "full disk" it's now returned to about 3 GB left.

It's about to die? Should I be looking for emergency replacement?

(It has the latest firmware update)

YAY, I have my space back!

This is the SSD. Humble apologies for ever doubting Sandisk!

I used a 3rd party viewer program, which showed I had 58 GB .sst files. I Googled, and found, ironically, that the problem is with Google Earth.

It's ignoring the limits of data cache and fill up just the drive. Uninstalled Google Earth and then so I went to the problem folder (which is not uninstaled) and removed that back so all my space.

Apparently, this is the last version that causes the problem. The folder to delete, in case someone else has this problem, is

C:\Users\Name\AppData\LocalLow\Google\GoogleEarth\

Thanks again for taking the time. I'm a happy Bunny now!

Tags: SanDisk SSD

Similar Questions

  • How sensitive divs that are the same height, but with different amounts of content in them?

    I try to use a square twice side by side on my site, and they are sensitive, but as they have a different amount of content in them, they are different height. How do I make them the same height so they dimensionnera always evenly?

    Here is an example of what I want to do.Screen Shot 2015-07-07 at 13.46.58.png

    Here is the css and html I use;

    . Half-width {} content

    Width: 50%;

    Float: left;

    Max-width: 675px;

    Max-height: 338px;

    }

    . {Texthalf}

    Width: 80%;

    height: 80%;

    margin: 10% 10%;

    }

    < div class = "Half-width-Content" style = "" background-color: # 2793 3; ">"

    < div class = "Texthalf" >

    < h1 > < font color = "White" > did you know? < / police > < / h1 >

    < hr > < / h >

    < h6 > < font color = "White" > Hacel has combined 100 years of experience in the lighting industry < / police > < / h6 >

    < hr > < / h >

    < / div >

    < / div >

    And this is what I get now;

    Screen Shot 2015-07-07 at 13.49.42.png

    Thank you

    First - make sure you include a link to the jquery library in your page head tags:

    And then paste the code I provided after him.

  • How to configure the different VLANs (using the E3200)?

    Hello.

    I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

    The E3200 is connected to a modem for internet access.

    I would like that the two networks to access the internet.

    The only E3200 does support the creation of VLANs?

    If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

    At the end of the day, I think that I would need at least another router.

    Thus, for example,.

    Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

    Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

    This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

    Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

    I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

    With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

    Thank you very much!

    -Rami

    The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

    You need to add network electronics.

    Ex:

    Managed with VLAN switch

    Another wireless router with VLAN

    If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

  • Original (D) disk image hard is full, what can I do to reduce the amount used. Emptying trash, Defraged etc, any ideas please

    (D) original hard disk image is full, what can I do to reduce the amount used, I 1.36 MB of 7.43 GB free space. Emptying trash, Defraged etc, any ideas please?

    You're not supposed to be access the recovery partition or copying what anyone, unless you go actually to recover the PC as long as you plant. -ignore the msg.

    In the system properties > System Protection disable protection for the D drive

    BTW have you created your recovery disks, using the process described by the manufacturer of your PC, if you you do not need to do that now!

  • The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

    I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

    The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

    My question is where and why it does this?

    Thoughts?

    Thank you

    Tom

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro/

    Hope this information is useful.

  • Can I manage a site using two different computers using Dreamweaver CS6?

    Can I manage a site using two different computers using Dreamweaver CS6?

    Yes, by using Check In / Check Out and a computer do not replace the work of the other or create copies in conflict.

  • How can I restore and recover the database to a different server using RMAN?

    Hello Friend:

    How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

    That's the two servers. different stored different on each server and a single link, a table library where backup set.

    I can only restore and recover the database of the Rman command. Could you give me a demo?

    Thank you

    How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

    That's the two servers. different stored different on each server and a single link, a table library where backup set.

    I can only restore and recover the database of the Rman command. Could you give me a demo?

    Check this box
    * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

  • Why disk utility displays different amount of space used?

    Hey everybody,

    I have a Macbook Air with 120 GB of space and OS X El Capitan 2014. Utility disk say I used 27,96 GB but the bar graph divided above say I used about 44 GB of space. Why is this?

    As you can see utility disk State 27.96 but above all, I have used that in the bar graph divided it say I have used over 40 GB of apps. How is that possible? I certainly don't have 40 GB worth of apps!

    Please, do not rely on this information in Spotlight display. It will be accurate if you have recently indexed the reader: Spotlight - how to re - index folders or volumes - Apple Support. Always count on what disk utility screens or read the information.

  • State machine with acquisition different modes/loops

    Hi all

    I did a machine design to State (as described here) to organize three (mutually exclusive) process / States: idle, measurement of calibration and continuous measurement. Calibration must be performed before measurement, because the result of the calibration is used for measurement. The data entry is a camera that should run continuously, also in rest mode.

    The problem however is that this state of calibration and continuous measurement (should) have another method of data acquisition. The measure is continuous and the images are processed in real time. To calibrate a number N of images should be accumulated and treated (simply create a background image).

    In the state machine as I have now (see attached image), I have the acquisition of vision outside the state machine in order to have a live view at any time. The problem now is that the inner loop in the State of calibration (the loop that must accumulate the framework) accumulates of course that the first framework N times, it is not question for all new managers during this State.

    Of course, I could fix this with an if/else statement in the first calibration mode accumulate images (if I< n,="" accumulate="" frame="" in="" buffer="" and="" continue),="" but="" i="" am="" not="" convinced="" that="" having="" a="" lot="" of nested="" loops="" is="" the most="" elegant="" way="" to="" do="">

    This also got me thinking, is the state machine, as I built it here all the best way to manage these two processes/acquisition modes? Or are there better ways to do this?

    Contributions and comments are very much appreciated!

    Note: I know that loop as scheduled now in State calibration is wrong with shift registers. It was a test before I realized that the fault was in the interweaving of the state machine altogether.

    Please do not attach pictures, but rather post executable code, screws (easier) or as extracts from LabVIEW (which became the screw when you drag in a block diagram).  If you have more than three attachments, compress the folder and attach the ZIP file.

    I was once describing a system similar to yours, and one of my students, who was a computer science major, said "it's not a State Machine."  I had a similar situation to yours, where I had a procurement process which took time and a 'Stateful' routine that does different things with data (in your case, use it for calibration, waiting to 'Go', absorbent, etc.).

    I understood that it was correct.  I ' D 'opposite' model, with the Acquisition, always running and "driving", the calendar and make 'Appropriate Action' on each set of data, where the Action could (and did) vary according to other conditions.  So I renamed my state machine 'Action engine', and everyone was happy.

    So I won't bother looking at your code (a quick glance showed me that I have only would be frustrated by the limited view), but will give you a suggestion for an alternative architecture.

    You want to (ideally) two parallel loops.  A single loop simply acquires the data (images) at some rate.  For each Image, it signals the loop else it's time to 'Action' on the acquired data (to do this, use a queue or the notifier).  You want that engine of the Action to perform independently the Acquisition loop, just in case a particular Action takes, say, 1.2 times sample to complete - you don't want 'Miss' samples!.

    The loop of the engine of the Action is a unique, appropriate Action at the time, on the newly acquired data.  If you are in the 'State' calibration, the Action will be "add to the calibration.  When you have accumulated enough data to do calibration, set the following Action to (for example) 'wait to start the Signal.  When you receive the Signal to begin, take Action to "acquire, process and save data.  And so on.

    As it happens, I did my code exactly in this way, but it was the idea General - Acquisition was the 'King', he ran the clock and led the ' Machine/Action State engine' to 'do the right thing, appropriate to the time' with the data.  See if this type of model is appropriate in your situation.

    Bob Schor

  • I can move my default libraries of different readers using Windows 7?

    I built my computer for video editing. I have an SSD for my C:\ drive and I want to make it the default player for my operating system, programs and the Documents folder and little else. I don't want my C:\ drive to be the default location of my music, pictures or videos library. I have a disc M:\ I want to be the default location of the library of music. I want all the files of music and other audio files like sound effects, voiceovers, etc. to be stored on the m:\. I also have a drive separate P:\ that I want to be the default location of the library of photos and the location of all the pictures, modified photos and other works of art, and I don't want any of this to go on my C:\ drive.  For video, storage I wanted to have a V drive but Windows says no. I guess because there might be confusion with a

    ------and a / being too close together, so for video storage, I have a HARD drive bigger designated S:\ disk for storage of videos and other things that require a lot of storage space. I don't want any uploaded photos, music or video to go to libraries on the default C:\ drive. How to load Windows 7 to do this? I want that music library on the m:\, the image on the drive P:\ library and the library of videos must be on the S:\ and I don't want music, photos or video libraries on my C:\ drive, can I get Windows 7 to do this?

    Hi Joseph

    Libraries are virtual folders. They adopt any significant amount of space on the hard drive (the value by default 4 libraries use about 100 KB of disk space) and they don't use shortcuts. You can add a folder to the library and a library that contains 10 GB of files will use approximately 50 kilobytes of disk space.

    The reason why they are named library is because they like the town library in your city that contains books from around the world.

    The libraries provide a convenient way to view the files that are contained in many other cases and in many other places. You can view files in folders on other drives or, partitions and even network locations.

    When you open a file in a library, you actually open the physical file in the folder that was added to the library. If you delete a file in a library, it will be removed from the physical folder.

    Here are some links more information.

    Work with libraries:

    http://Windows.Microsoft.com/en-us/Windows7/working-with-libraries

    Libraries: Frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

    Libraries - Microsoft Windows:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

    To free up disk space on the system (c) disk, you can move the physical folder (for example, My Documents, pictures, music, videos) that is included in a library to a different location.

    1. go on the target drive where you want to move the folder and create a new folder with the same name.

    2. on the C: drive, navigate to the folder that you want to move. Click on folder and select the tab properties/location.

    3. click on the move button and select the new folder that you created in the target drive.

    See the following article for details.

    Redirect a folder to a new location:

    http://Windows.Microsoft.com/en-us/Windows/redirect-folder-new-location#1TC=Windows-7

    Let us know if you have any other questions.

    Concerning

  • Several SELECT statements with COUNTY with different WHERE clauses.

    OK, so for a bit of background on what this is trying to accomplish...
    I have a small group of people in my team and I will use GROUP BY for their names.
    If each person will be on their own line. Next to their names, I want to be able to have several columns that use the ACCOUNT for the different search criteria (no duplicates)

    Overall, it should have their names, and I would like to add the number of tickets that each person has which meet certain criteria (all in different columns)
    I have applications that can do each of these tasks, but is it possible that I can group together on a single table statements, or use subqueries for these results?

    Do you mean you want something like that?

    SQL > ed
    A written file afiedt.buf

    1 with the team (emp_id, emp_name)
    2 (select 1, 'Fred' from dual union all
    3. Select 2, 'Bob' Union double all the
    4. Select 3, 'Jim' to double
    5            )
    6, tickets (emp_id, ticket_type, ticket_id, ticket_desc)
    7 (select 1, 1, 'BUG', 'First billet Freds' double Union all)
    8. Select 2, 1, 'CHANGE', "Freds second ticket" of all the double union
    9 select 3, 1, 'BUG', ' Freds third ticket "of any double union
    10. Select 4, 2, "CHANGE", "Bobs first ticket" of any double union
    11. Select 5, 3, "CHANGE", "Jims first ticket" of any double union
    12. Select 6, 3, "BUG", "Jims second ticket" of all the double union
    13. Select 7, 1, 'BUG', ' Freds fourth ticket ' from dual
    14            )
    15-
    16 END OF TEST DATA
    17-
    18 select emp_name
    19, count (case when ticket_type = 'BUG' then 1 end to another null) and bugs
    20, count (case when ticket_type = 'CHANGE' then 1 end to another null) as changes
    21 of the team t
    22 a left join external tickets tk (t.emp_id = tk.emp_id)
    23 * emp_name group
    SQL > /.

    EMP_ CHANGES OF BUGS
    ---- ---------- ----------
    Bob           0          1
    Fred 3 1
    Jim           1          1

  • Dual Vostro 200 boot is a different amount of system memory

    I have an old slimline Vostro 200 desktop with the motherboard G33m02 and configured with 3 sticks of 1 GB and a 512 MB memory card.  The machine is dual-boot Win 7 and XP 32 bit (only used offline).  When I boot on Win 7, the computer - screen properties poster 3.50 GB of system memory, but if I start XP he 3.24 GB?  I thought XP 32 bit should be able to see the 4 GB?  The... what?

    Ed

    Warmbeer

    Quote:

    "Your statement about 3 + / GB also confuses me.  Shouldn't there be a specific amount rather than a variable amount of RAM that can be approached?'

    There is no specific amount, because the amount of memory can vary.

    This can be interesting to read:

    https://social.technet.Microsoft.com/forums/Windows/en-us/048ed81d-0e9a-471C-99fa-ca6c26c956d1/how-much-memory-can-Windows-7-32bit-support

    Bev.

  • Different when using different reading software

    I use NI9205 and NI DAQ 9171USB, a battery and a DC output have been wired to NI9205.

    However, when using MAX (the creat task function), express Signal or a program, I created using DAQmx functions to get the output voltage,

    I got different readings for the same channel (20-50% of variation). and it turned out that only the readings of my own program are the same as what I measured with a portable meter,.

    Really do not understand how this could be possible? What's wrong with the MAX and the Signal Express?

    BTW, I made sure I put the connection method to be CSR in all three cases.

    Entrance to anyone who will be greatly appreciated.

    Problem solved. Everything is fine with the DAQ platforms

  • Generate a pulse trains finished redeclenchables 2 of different duration using 2 counters

    Hello

    What I want to do is to generate at the same time 2 redeclenchables finite pulse trains using my PCI-6221.

    To be more clear, take a look at the attachment.

    Relaxation is in/dev/PFI0 for example and I want 2 impulses/dev/ctr0 and/dev/ctr1 at the same time.

    I can easily produce/dev/ctr0 or/dev/ctr1, but never/dev/ctr0 and/dev/ctr1 at the same time.

    It sounds feasible that I want to achieve?

    Thank you very much.

    Adrian

    I couldn't open your VI as I use LV 2011 on this desktop computer.

    However, you must just on delay initial as well as the low time some delay desired with respsect to PFI0 on the ctr0 task.

    Other NI DAQ products behave differently, but the 6221 uses "shortly" for the initial delay for each output reset after the first.

    Best regards

  • Moving VMs to different vCenter using SRM + RecoverPoint

    I need to spend 5 virtual machines to a different data center permenetly. The good news is these virtual machines are already protected by 3.4 SP1 RecoverPoint and Site Recovery Manager 5.0, because we already have replicate them I'm working on a way to swing these VMs, reverse the RecoverPoint replication and pretty much swap around, so they are replicated to the initial data center.

    I just installed SRM 5.0 so we continue to use its latest features, but I assume that what I said above is actually possible? Perhaps he might not be as clean I hope, but at least I wouldn't be able to do the following? Keeping in mind, if this fails, we would just go back to how it was.

    1. run the failover plan that will recover virtual machines to the new data center

    2 reverse replication in RecoverPoint, making the new primary data center

    Is this possible?

    The old production VMs is converted into placeholder VMs. The point behind this conversion is that identity of the virtual machine does not change when you cycle complete (failover from A to B, Reprotect to B, B to A failover). It should all work modulo any RecoverPoint questions and / or ODA I mentioned. Incidentally I have never worked with RecoverPoint SRA, so that part is purely speculative.

    -Remy

Maybe you are looking for