States of the button (up/down/over) image does not work properly.

Similar Questions

• The magnification on my Macbook Pro does not work properly

  During the last hour, when I go to select something in the dock, the magnification will rarely happen now. It seems that every tenth or more trying it works, but then stop immediately. I tried to turn the setting then turn it in system preferences, but which is not helping them. Does anyone have a solution?

  At the same time, whenever the magnification does not work, the name of some application, the cursor is above will no longer appear.

  SystemPreferences-> dock

  Check the magnification box and set the magnification desired.

• Another Question... Pasted the first album... but does not work properly

  Hello-

  Another question - I stuck my first file (wpa without loss) from the album on my rocket and when I go to him, he travels only (so 1,2,3, etc. and then it again.)  The songs look like they have any length, if that makes sense.  The bottom bar is from 0:00 0:00.  The strange thing is the player will play all music pre-loaded there, and when I tried to copy a song the player on the computer off, he played.  It is therefore not the file of the song itself I guess.

  What I've done wrong? And how to fix it?

  Thank you very much!!  This forum is very useful for a beginner!

  WMA Lossless is not a supported audio format. Which means that it won't work. You will need to re-Ripper in plain ' ol .wma, .mp3, .ogg or .flac format.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Hello

  I understand that you are facing problems with the creation of a "New folder" option in the context menu.

  Have you made changes on the computer before this problem?

  I suggest to follow the methods provided below and we update on the State of the question.

  Method 1: I suggest you to follow the steps suggested by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/9ee6ecdf-5958-4AF4-B640-c659ada57bc4/

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 2: If the problem persists, I suggest you follow the steps proposed by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/
  Hope this information is useful.

• The right click "rotation" clock or function in a clockwise direction counter on my images does not work

  The right click "rotation" clock or function in a clockwise direction counter on my images does not work
  There is a range of adjustment that may be messed up?

  You are under Win XP and the display of photos with Windows Picture and Fax Viewer?

  Explain what you mean when you say "does not" you receive an error?

  The following command will force a reinstall of Windows Picture and Fax Viewer and can be worth a try:

  Reach... Start / run... and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET