Static IP address does not work

Hi everyone, small problem.

I put a static IP address (, this is how I did it) and now my WiFi does not work. I tried most of the things at this point, and its getting on my nerves. When I go to my modem config ( I see the device listed with the IP address has changed, but when I go to any Web site other then my modem config, internet will not work. It also shows that if I ha no WiFi in my task bar thing. I have a static IP address on my Tablet very well and want to do the same with my laptop win8.
Any suggestions?


1 have. what measures you taken to set the static IP address?

2. don't you get any message/error code when you try to access the internet?

3. What is the brand and model of the computer network adapter?

I imagine the inconvenience that you are experiencing.

This problem may occur if you have correctly configured the static IP address.

Here are the steps to manually configure the IP address in Windows 8

a. go to the search box, type ncpa.cpl , and click the icon that appears in the result.
b. a network connection window opens. In the network connection window, right click on 'connect to the Local network' and select 'properties '.
c. a Properties window opens. In this window, select "Internet Protocol version 4", and then click on "Properties".
(d) another new window will be opened. In this window, click on 'use following IP address ". Your IP address, then click 'OK' to save the setting.
e. in this step click on 'Close' in the Ethernet Properties window. All your network settings will be changed.
f. now you can see your address IP changed. That open to a command invites as administrator and type ipconfig and press Enter.
g. your network adapter settings have been changed.

If you are still having problems connecting to the internet, so I would ask you to reset TCP/IP and check if it works.

Follow these steps:

one) starts at the desktop view.

(b) open the command prompt, right-click in the corner when the start window appears, select command prompt (admin).

(c) at the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt

Note: If you do not specify a path of the directory for the log file, use the following command:
netsh int ip reset resetlog.txt

(d) restart the computer.

See also:

Wireless and wired network problems

I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

Tags: Windows

Similar Questions

  • I need to connect to Microsoft to pay a Bill. I do not know my password and my email address does not work.

    I need to connect to Microsoft to pay a Bill.  I do not know my password and my email address does not work. Please help me how to do this.


    Here is a link to the MSN Support.

  • Default IP address does not work after resetting to factory default.


    I have a problem with a HP LaserJet P2015 default IP address. If I unplug the LAN cable default IP is set.

    As soon as I plug back into the address does not work and if I print the summary page, now, there are whritten:

    IP address: Configuration (it does not stop to set up after waiting 1 hour it's still set up).


    Auto-IP: enabled

    I think that the Auto-IP (DHCP, probably) is the problem... but how do I turn it off?

    Thank you


    Hello JayKM,

    Welcome to the Forums of HP Support!

    To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do the Commercial LaserJet Forums.

    Support of your product page can be useful in the meantime: HP LaserJet P2015 printer

    I hope this helps!

  • you want to know why my email address does not work in my muse contact form widget?


    You want to know why my email address does not work on my muse contact form widget?

    Captura de pantalla 2015-09-15 a la(s) 13.10.48.png

    Hi Omar,.

    Please see: Troubleshooting Muse form used on the servers of third party Widgets

    Kind regards


  • Cannot get the procedure for d3dperf_setoption (d3d9.dll) - Skype address does not work

    I face this big mistake:-failed to get address of procedure for d3dperf_setoption (d3d9.dll)

    ... when I start my pc, then show this msg my Skype software does not work. installation of the software is no longer. Please solve my problem. thanking you...

    Hello jassi8,

    Often we see errors as the result of a program from loading at startup.

    To solve these, we use the clean boot troubleshooting.

    The following describes this process:

    Best regards


  • Static assets selection does not work in 10.2

    Here, dear

    I have an application with selection of static assets, whose exhibition structions aset looks like this:

    |     |----720x720
    |           |----ui1.qml

    The intention is that when run on devices of 720 x 720 (q10/CAD), must use the ui1.qml sub-folder '720 x 720'.

    Everything works fine when build Momentics 10.1, but when build Momentics 10.2, the built application does not work. Which means that it always uses the ui1.qml under the heading 'assets' regardless of the DPI of the device.

    There that anything must be updated for the 10.2?

    Thank you


    Just to finance a solution soon as I posted this: to add an entry in assets/gear - assets.xml:


    Hope this helps someone as well.


  • unique IP address does not work properly. with win7 host and guest.


    I can use internet equally as good on my host and guest WIN7 using a bridge connection.

    I use a bridge connection.

    My main goal with win7 as a virtual machine is to use the same application online with a different IP address... This is where it falls apart. When I do 'whatsmyip"on the virtual machine and the host. It appears to be the same.

    ipconfig in CMD shows 192.168.1.x1 on the host and 192.168.1.x2 on the comments. but make an ip check online shows that

    96.365.1xx.x on two of them.

    I only got an E-card... but maybe there's a way to fool the router by giving me two single dynamic IP address...

    Thank you for your time!

    Attached is a mental map of the way I'd like it works. (The two runnig Windows 7)

    On the IP addresses should not be the same as those listed below


    The problem here is not in VMware Workstation or your host, its your NAT:ed internet connection.

    Your internet provider very probably only you give an IP to get out, if you want more you have to communicate with them.


  • Get the iPad or Android device MAC address does not work (works in AIR Desktop)

    I try to get the MAC address of the device to the user in Adobe AIR. This is the code that I use.

    public function getDeviceMac (): String {}

    Return NetworkInfo.networkInfo.findInterfaces () [0].hardwareAddress.toString ();


    That works well in the PC (or during the test in the PC with ADL Mobile).

    but in the iPad 2, or in a device Android (Acer Iconia A500) I get an error

    on the property There is not. I guess it is not implemented in mobile

    versions of AIR. It would be nice if it was applied in future versions.

    There is no work around for this?

    I'm looking for just a way to uniquely identify a device, is there

    a unique identifier that I can get the AIR by programming

    (maybe the UDID?), if it is not possible to obtain the MAC?

    Thanks for your help!


    You will need to iterate through all available interfaces and find the hardwareAddress.

    NetworkInfo.networkInfo.findInterfaces () [1].hardwareAddress.toString ();

    In addition, for Android, you will also need to specify the permissions ACCESS_NETWORK_STATE and ACCESS_WIFI_STATE in the following application descriptor.



  • HP ePrint only works for the main e-mail address, does NOT work for the other email address

    I have several e-mail addresses configured in the list of authorized sender, but it seems to work only for e-mail messages sent from the e-mail address (main) of the owner. I get a confirmation email when I use other e-mail addresses, saying that "labor received ePrint" but no dice.

    What gives?

    Thank you


    Hi panchuparayil,

    Thank you for the update.

    Please start with the update of the printer by getting the latest Firmware and updates given that a firmware update available.  After completing the update of the firmware, please restart the printer.  Once the printer has been restarted, please try to send another email to the address of electronic mail of the ePrint printer.

  • The address bar does not work in Thunderbird 3.31

    In TBIRD 3.31, entered an address does not work. Is there a fix, or TBIRD has just been lazy fixing a huge problem in the update. Besides the gray boxes that we seem all to hate, this is what happens. Let's say I want to send an email to David Richards. I go to the first line of the address on my message, type "dav" and four addresses are presented for me to choose... David Elliott, David Richards, David Franks, and David Bloom.

    I click on 'David Richards' and the insert name and e-mail address on the address line 1. I hit TAB or ENTER, to go to line 2, to insert a second address and immediately 'David Richards' is replaced by David Elliott - the first name in the suggestion list.

    Only two workaround solutions are, after you have inserted the correct name in the list, 1) right-click on the 2nd line of the address, or 2) type the name on line 1, so that it is the first choice in the suggestion box until I hit TAB or ENTER.

    This, of course, defeats the function addresses completely automatic filling.

    Lazy Thunderbird HELP. How can you not have noticed and it's already fixed?

    Yes, it's a bug, and no one is being lazy.

    People volunteer their time to bring you a mail client and as soon as there is nothing like a problem, someone is lazy. Seriously, this is not acceptable. Before commenting on the contributions of others, please indicate what your contributions have been.

    Bug 1107844refers

  • Search engine does not work.

    The google search engine thingy next to the web address does not work. I can type stuff in there, but pushing enter or the magnifying glass does not get for research. For some reason, it seems to work perfectly on privacy, but not regular navigation. I use firefox version 4.0.1 on a laptop macbook OS 10.6.7.

    Why it won't work and how I can get it working again?

    You can try:

    Did you look at this article?

  • E-mail account does not work in Outlook

    Why would one of my e-mail addresses does not work in Outlook, but work in other e-mail programs?

    Why would one of my e-mail addresses does not work in Outlook, but work in other e-mail programs?

    It would be better if repost you Outlook Forum. Here is the main link, and when you're there, you can decide which category you want to use:

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • static ip address mapping of RVS4000 does not work

    With the help of a rvs4000 with firmware v2.0.3.2 I am able to delete the entries ' Configuration/lan/static ip mapping', but I'm not able to add a few.

    After an entry is deleted, hitting save (which restarts the router) then try to enter the device even with a different static ip address, the 'Add' button has no effect.

    Does anyone have an idea on how to get around this problem?

    Hi John, it may not be useful, but you can try a different Web browser? Obviously it worked, now it does not work. Maybe the browser is not loading correctly or "recovery" in itself.

    Please mark replied messages useful

  • network connection does not work on the static ip address


    I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

    Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:


    Hello and welcome to the community

    There are a few things to consider in this regard

    First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

    Just in case, here is the procedure to do so: (WS.10) .aspx

    Second of all, to virtualize a domain controller also has a specific process that must be followed.

    Most of the people prefer to create a new virtual domain controller and move all of the above roles.

    Here are two rounds, that you might find useful:

    Don't forget to assign points if you find this useful/correct

  • Network (NIC) card does not work with DHCP or static IP

    Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

    Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver

Maybe you are looking for