static ip address mapping of RVS4000 does not work

With the help of a rvs4000 with firmware v2.0.3.2 I am able to delete the entries ' Configuration/lan/static ip mapping', but I'm not able to add a few.

After an entry is deleted, hitting save (which restarts the router) then try to enter the device even with a different static ip address, the 'Add' button has no effect.

Does anyone have an idea on how to get around this problem?

Hi John, it may not be useful, but you can try a different Web browser? Obviously it worked, now it does not work. Maybe the browser is not loading correctly or "recovery" in itself.

-Tom
Please mark replied messages useful

Tags: Cisco Support

Similar Questions

  • Sending an address from google maps to 765 does not work

    I tried to send an address from my office to my gps. It would not work?


  • I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

    I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

    Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

    If not, try these standard troubleshooting steps.

    -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

    -Restore your iDevice: https://support.apple.com/en-us/HT204184

    If your backup is in iTunes, make sure that it is encrypted.

  • XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

    This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

    Hi MarkReeves,

    1. What is the accurate and complete error message?

    I suggest you try the steps from the following links in the article and see if it helps:

    The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

    How to reset the Protocol Internet (TCP/IP)

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    I hope this helps.

  • Photosmart HP 7520: Scan to email does not work

    Hello

    For the last few days I am facing problems of scan to e-mail function. It gives me an error - "failed to connect to Web Services. "Confirm access to the internet and try again. I checked access to internet, is turned off and turned back on, but everything is fine, except that scanning to e-mail still does not work.

    I also tried the suggestion of manual entry of the DNS server in the DNS address configuration, but it does not work.

    Kindly help.

    Kind regards

    Alok

    Hello @alok7,

    Welcome to the HP community!

    I understand that you have a problem with scanning to E-mail app on e-all-in-one printer, HP Photosmart 7520. I'd love to help you with this.

    Here are the steps I suggest to try everything first:

    Network Power Reset:

    We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

    Restore the default settings of the network and reconnect:

    1. on the front panel of the printer, press your up wireless icon

    2. Select settings.

    3. Select restore default network settings.

    4 turn on your printer.

    5. once it is initialized to save, press the wireless icon again.

    6. Select settings.

    7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

    8. try to activate the web services again.

    Configure a manual DNS for your printer:

    You mentioned that you have already tried defining a manual DNS for your printer, DNS that you used. If you have not already tried so, I suggest to use primary like DNS 8.8.8.8 and 8.8.4.4 as the secondary DNS.

    If your web services connected, even if scanning to email does not work, you may need to reset the web services on the device.

    NOTE: Reset web services clears the custom email ePrint you have configured on your printer. Please be aware that if you have a personalized email ePrint, after doing this, you will need to configure again and will not be able to use the same address.

    1. press the Web Services button on the front panel.
    2. tap on settings.
    3. pressremove web services"and confirm deletion.
    This will bring you to the homepage.
    4. press on the icon Web Services , once again on the printer and go through the installation process.

    5. once the web service has been activated again, try to configure your scan to E-mail

    Please reply to let me know if these measures have helped to solve your problem.

    Thanks for posting!

  • I can't connect to my hotmail and windows live reset does not work for now please help

    I can't connect to my hotmail address and reset link does not work... keeps telling me to come back later

    Hello

    Please repost in the correct hotmail forums the link below

    http://windowslivehelp.com/product.aspx?ProductID=1

  • Urgent need help - APEX URL does not work when computer conncects to the Internet

    APEX, I installed it on my computer. But the APEX is unusable until the computer is running in offline mode.
    If I connect to the internet. Using the URL now
    http://localhost: 8080/apex
    I get the message below.
    ---------------------------
    Internet Explorer cannot display this webpage
    -----------------------------
    I also use the name of the computer/IP addresses to test, it does not work either.
    But if I work offline, APEX can work.

    I tried to disable IPv6 on my computer, but it still does not work.
    My OS is Win7. Recently, I changed my OS, the latest operating system is Windows XP and APEX worked correctly.
    Can anyone help with this?

    Thank you in advance.

    Disable the proxy for your localhost configuration (or add on an exceptional basis through manual configuration). Your network is not finding your host when searching the path (to the internet) to reach it.

  • Static IP address does not work

    Hi everyone, small problem.

    I put a static IP address (http://www.youtube.com/watch?v=rHQzHCQhHHgup, this is how I did it) and now my WiFi does not work. I tried most of the things at this point, and its getting on my nerves. When I go to my modem config (192.168.0.1) I see the device listed with the IP address has changed, but when I go to any Web site other then my modem config, internet will not work. It also shows that if I ha no WiFi in my task bar thing. I have a static IP address on my Tablet very well and want to do the same with my laptop win8.
    Any suggestions?

    Hello

    1 have. what measures you taken to set the static IP address?

    2. don't you get any message/error code when you try to access the internet?

    3. What is the brand and model of the computer network adapter?

    I imagine the inconvenience that you are experiencing.

    This problem may occur if you have correctly configured the static IP address.

    Here are the steps to manually configure the IP address in Windows 8

    a. go to the search box, type ncpa.cpl , and click the icon that appears in the result.
    b. a network connection window opens. In the network connection window, right click on 'connect to the Local network' and select 'properties '.
    c. a Properties window opens. In this window, select "Internet Protocol version 4", and then click on "Properties".
    (d) another new window will be opened. In this window, click on 'use following IP address ". Your IP address, then click 'OK' to save the setting.
    e. in this step click on 'Close' in the Ethernet Properties window. All your network settings will be changed.
    f. now you can see your address IP changed. That open to a command invites as administrator and type ipconfig and press Enter.
    g. your network adapter settings have been changed.

    If you are still having problems connecting to the internet, so I would ask you to reset TCP/IP and check if it works.

    Follow these steps:

    one) starts at the desktop view.

    (b) open the command prompt, right-click in the corner when the start window appears, select command prompt (admin).

    (c) at the command prompt, copy and paste (or type) the following command and then press ENTER:
    netsh int ip reset c:\resetlog.txt

    Note: If you do not specify a path of the directory for the log file, use the following command:
    netsh int ip reset resetlog.txt

    (d) restart the computer.

    See also:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • network connection does not work on the static ip address

    Hello:

    I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

    Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:

    Capture.JPG

    Hello and welcome to the community

    There are a few things to consider in this regard

    First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

    Just in case, here is the procedure to do so:

    http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx

    Second of all, to virtualize a domain controller also has a specific process that must be followed.

    Most of the people prefer to create a new virtual domain controller and move all of the above roles.

    Here are two rounds, that you might find useful:

    http://communities.VMware.com/thread/209813

    http://communities.VMware.com/thread/209889

    Don't forget to assign points if you find this useful/correct

  • Network (NIC) card does not work with DHCP or static IP

    Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

    Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver

  • AutoComplete does not work on the address field.

    AutoComplete does not work on the address field. This means that the completed form is missing from the address. What is special about the address field and why doesn't autocomplete work? I have NOT opted for "don't follow it.

    http://www.thepetitionsite.com/TakeAction/918/708/047/

    Hi robmm76. I looked at the link you provided. It seems that the reason why AutoFill does not work for the address field is because of the way this field has been programmed on the site. It has been programmed to make type you part of your address and click on the right pair and it would then fill in city, State and zip code. If this field is just a special case.

    I hope this information answers your question. If you need more information or help please do not hesitate to reply to this reply.

  • Firefox address bar does not work

    I recently updated my software Kaspersky of Kaspersky Internet Security Kaspersky Total security, 2015 at around the time that Firefox automatically updated from version 35 to 36. I don't know if the update of Kaspersky has nothing to do with the problem, but now the Firefox address bar does not work. I've 'come down' Firefox to version 35, but it still does not work.

    You can add a URL in a window of the Firefox window (Firefox or Google) search engine, and that works, like clicking on the hyperlinks that appear. But the address bar is totally dead! The address in my browser Google toolbar also works OK

    I hope that someone familiar with the operation of Firefox knows how to solve this frustrating problem as I prefer Firefox Google.

    Thanks for the help.

    Tallboyrip

    Hello

    Follow this:

    https://support.Mozilla.org/en-us/KB/navigation-buttons-missing

  • The address bar does not work in Thunderbird 3.31

    In TBIRD 3.31, entered an address does not work. Is there a fix, or TBIRD has just been lazy fixing a huge problem in the update. Besides the gray boxes that we seem all to hate, this is what happens. Let's say I want to send an email to David Richards. I go to the first line of the address on my message, type "dav" and four addresses are presented for me to choose... David Elliott, David Richards, David Franks, and David Bloom.

    I click on 'David Richards' and the insert name and e-mail address on the address line 1. I hit TAB or ENTER, to go to line 2, to insert a second address and immediately 'David Richards' is replaced by David Elliott - the first name in the suggestion list.

    Only two workaround solutions are, after you have inserted the correct name in the list, 1) right-click on the 2nd line of the address, or 2) type the name on line 1, so that it is the first choice in the suggestion box until I hit TAB or ENTER.

    This, of course, defeats the function addresses completely automatic filling.

    Lazy Thunderbird HELP. How can you not have noticed and it's already fixed?

    Yes, it's a bug, and no one is being lazy.

    People volunteer their time to bring you a mail client and as soon as there is nothing like a problem, someone is lazy. Seriously, this is not acceptable. Before commenting on the contributions of others, please indicate what your contributions have been.

    Bug 1107844refers

  • my firefox has been updated yesterday, and since then I can't copy any link in a text of the e-mail, more. I drag the address of the page, but the link does not work. Thank you.

    my firefox put updated yesterday, and since then I can't copy any link from a web page in an e-mail message more to send. usually, I could drag the address of the page and it automatically copied the blue link and it could open. now, it does not work. I use gmail, but I don't think it is related to the post.

    In Firefox, you usually use a string as button in the toolbar all foregoing enamel make up the zone Editor to create a clickable hyperlink.

    Sometimes, it happens automatically if you send the message, but I've never seen this in Firefox when you compose a message.

  • How to remove a web address in the address bar drop down list? The old advice does not work. Help!

    The OLD advice for this problem, listed below, does NOT work. Web addresses just do not detach:

    1) click the arrow located on the right side of the address bar of Firefox. A list of URLS will come down.

    (2) place your cursor on the URL that you want to delete manually.

    (3) press and hold the "shift" on your keyboard. Then, press the "Del" key The URL highlighted is removed. Or I have been advised to hold the 'Ctrl' key Neither work.

    There are a few new instructions, updates on how to remove the unwanted drop web addresses. Everyone?

    Hi, if your problem is removal of the history of the site. Click on the firefox menu and go to history-> history-> click history on the left side of the window. Now you can remove unwanted Web sites from the list.
    If you want to delete bookmarks fallow the instructions remove bookmarks

Maybe you are looking for

  • laptop 15: cut the light on the button no longer works.

    Hi, I've updated the audio driver, but mute the light still does not work. I'm hesitant to do a system restore, because as soon as there is an update, it will be more wright drivers and the problem will re appear. Let me know when there is an update

  • HP p2-1334: do not install drivers

    I installed Win 7 Pro 64-bit on the desktop HP-P2-1334 which had win 8 above. I downloaded the network and video drivers to win the 8 initially provided with the computer The two pilots installs drivers but nothing happens. At the beginning when I in

  • Express installation media player on Satellite M40x 183?

    Is it possible to install M40x-183 express media player and play DVDs and audio CDs without booting windows using media buttons?

  • M70-147 need of new graphics card drivers

    Is this a new version of the drivers for my Ati Radoen X600se because I have some problems with a Vertain game I play? When I type alt tab at any time and im using the drivers from the Web site.

  • HP Officejet 4622: Printer HP Officejet 4622 cannot read alignment page

    I use a HP Officejet 4622. It ceased to print correctly. I've cleaned and tried to align the heads, but the impression seems to be so vague that the printer cannot read the alingment sheet when I try to scan to complete the process. Is that what I ca