Static set point Watlow F4

Similar Questions

• Eurotherm 2404% manual power set point

  I'm using the LabView ET24xx driver. It works fine if I want to set and control in automated mode. I'm looking for the ability to create a vi that allows me to switch to manual mode (able to do that) and adjust the set value (can't do it). The set point in Manual Mode is generally the percentage of power. I would like to be able to establish to anything other than 0% or 100%, however when I use the driver it does not appear as a method of manipulation of this. I know I'm missing something, and any help would be greatly appreciated.

  Thank you

  Tennessee Paul

  Thank you, Robert. After a lot of research I found the solution:

  Use the VI: ET24XX configure OP key parameters 2. VI

  key point in the use of this VI. The power (or control) setting labeled power output target is in tenths. A value of 5 = 50%. A value of 0.5 = 5%. With this VI no value greater than 10 will work. The VI will timeout on the "Write" command, if the value is greater than 10. I don't know why this VI was established in this way. Remove the output target x 10 serving power and wiring of the power output target control directly in the table of generation within the VI allows a more intuitive entry of power, until we realize the value of the power output target is %.

• Profile of PID Set point

  Hello guys

  im working on the project to control the position of the hydraulic cylinder using labview connected with the NI USB 6251 housing. IM using the sensor LVDT (1V = 20 milimeters) as a measuring device.

  I have a problem when using profile.vi PID setpoint. I need to define the profile of set point (in milimeters) and then divide by 20 (to be converted to voltage) before entering the profile.vi of PID setpoint. I don't know how to divide that cluster of data types (composed of 2 elements (time and setpoint)) with a constant '20', I want only to divide the element of set point, not to divide the time element. Please see my attached VI... Thank you very much for your help guys...

  No I got it myself using bundle features... Thank you guys

• Put the data of the set point in a waveform graph

  Hello

  In a graph of measure, which is the result of a waveform, I would add data of the set point as well. How can I add this data to set for the chart value?

  In a control loop system, the output is controlled by a labview program. I would like to see the point of this system as well as in the graph, these thresholds are changed at random times, so I don't know how to create a waveform of these data. Should I create a waveform of the setpoint, or y at - it another option to show the set value in the chart?

  See you soon,.

  Rolf

  That can make it much more difficult.

  At one point an array of 1000 points need to be assembled (obviously). How do depends greatly on your structure. Synchronize the time of the two signals can be very difficult. It would be easy if the set value only changed once a cycle of 1000 point.

  You may want to read the SP as an analog input, so you get 2 samples of the material here. In this way the two will always be synchronized. But I'm done alleady assumption, like this, the signal is an analog input (and the target value of one analogue output). What equipment do you use?

  I think always need you a loop to get data and a loop to set the SP. The two loops will be more parallel execution GLSL and synchroniseent. The trick is to synchronize, or for the deterministic timestamps in two loops. If you can make that happen, you 80% there. You could do loops timed loops (using the same clock). Then you get the timestamps in two loops. The MS loop has the queue changes, pushing the value and time. Then the loop of data can use values and hours to create examples of sp 1000.

• Having bad to write the set Point to clip MFC

  I've already written a Subvi for reading and parsing the output of a scientific MFC of clamp (16 series), which works very well, however, I have some difficulty in sending a set-point in the MFC. I have attached a Subvi test as I write. All of the com parameters are matched to the CMF as well (19200 baud, 8 bits of data, no parity, 1 stop bit, no flow control). After setting the appropriate resources channel, I enter the following in the field of the buffer:

  \r\r\r\r\r\r\r32000\r

  which I believe must send the deposit to the MFC, but I am seeing no response. When I entered the same string in the VISA test panel in MAX, it works however. Anyone has an idea on what I'm doing wrong? Please also let me know if there is any additional information I could provide that would be useful. Thank you.

  You send the characters '-' and 'r', not a carriage return.

  Place the command string buffer writing '-' display of Codes in order to send '-' Codes correctly. It's a simple right click.

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.

• Sustaining the values of point unchanged after a "set-point and redirect.

  I use the instance online on apex.oracle.com
  
  I have a form that looks like this:
  
  Name: < text field >
  Type: < select list >
  Property1: < select list >
  
  When Type is changed, a "set-point and redirect" are performed.
  
  The source of Property1 is determined by the value of Type. This means that whenever the Type is changed, the Property1 value could change.
  
  'Name' is not affected. The problem is when I change the 'name' and then change 'Type', the action "Set the value and redirect" returns 'Name' to the value it had when the first load of the page.
  
  The question is: is it possible to ensure that the 'name' retains some value it had just before "the set value and redirect" was carried out?
  
  Thank you.

  popovitsj wrote:
  I use the instance online on apex.oracle.com

  I have a form that looks like this:

  Name:
  Type:
  Property1:

  When Type is changed, a "set-point and redirect" are performed.

  The source of Property1 is determined by the value of Type. This means that whenever the Type is changed, the Property1 value could change.

  'Name' is not affected. The problem is when I change the 'name' and then change 'Type', the action "Set the value and redirect" returns 'Name' to the value it had when the first load of the page.

  The question is: is it possible to ensure that the 'name' retains some value it had just before "the set value and redirect" was carried out?

  Create it Type and Property1 by using the ability of LOV cascade integrated rather than try to to re-create yourself.

• 3.6 spot healing Lightroom crashes, not showing do not set points

  I waited months to update to 3.6 because I finally got Lightroom works fine on my machine. Earlier versions would hang on the spot on the sharp heal tool I have to close it using the Task Manager. The problem comes when I edited a file in an external editor and I'm working on the tif file that was imported into Lightroom. The just spot Healing Brush tool will not work. This continues to happen even when I close Lightroom and return to the file later. This me really bums as it overwrites just my workflow!

  I also have a new problem. It could be that I touched something somewhere to cause the following behavior. When I work on an image with the adjustment brush, the set point disappears. It appears so if I want to change the brush settings the point are there not to click on an active brand, so I can adjust the settings again. It started just because I upgraded to 3.6. I think I was using 3.4 before and I've never had this problem.

  Thank you in advance for any help you can provide.

  There is a bug in Windows that will cause LR to hang when you move the circle 'source' (at least some) JPEG files. It can so happen with TIFF. Lightroom will lock tight for a period of time in seconds to several minutes.

  To work around the problem, you can set the processor affinity for Lightroom to use only a single core. Under windows, bring up the Windows Task Manager, go to the process tab, right-click on the process of Lightroom and choose Set Affinity... Disable everything except a processor.

  This bug will be fixed in LR 4, of course.

  HAL

• Question buttons, redirect optional URL and "Set points".

  Hello Apex experts... and others!
  I tried to use the "redirect to URL Optional" and "Set POINTS" a button to initiate new elements of page target.
  It does not, the target_page elements are not being updated!
  Deletion of the redirect URL and create a branch when 'NEXT' and assigning the same target page elements works fine
  What is the difference?
  When should I use the "Optional URL forwarding" option?
  / Curious Guan

  When the creation of a button if you select "Create Button in a position of region" button becomes an of the Page "button, if you select 'Create a button displayed among the elements of this region', it becomes just a button or a region...

  V/R

  Robert

• How can I set point-descriptor property type data external media?

  Dear,

  I created my own point descriptor and it works fine when all the properties of type string, but I have a picture property, and I want it to be of type external media, so I can search in bcc. Also I want to set the product type property and category, how can I do this?

  I did the below but I got an exception

  < property name = "promotionImage" column name = display name "Promotion_Image_Id" = "Promotional Image" data type = "media-external" / >

  any help is appreciated... Thanks in advance.

  I thought what is the problem, I have to use the element instead of the type of data type

• Origin of the mobile ruler, setting point of reference etc.

  Hello

  I'm quite new to script InDesign. I do a script that moves and makes duplicate various page elements. My problem comes when the user has moved the origin of the rule it messes up my script.

  How, within a script, can you put the ruler origin to the top left of the page/spread?

  In addition, when you use a method pageItem.move (to) or pageItem.duplicate (to) , how do you know if you are using a left upper anchor point reference or a reference point of the centre centre etc.?

  Thank you!

  Nicolas

  1. RulerOrigin sets whether the rule is relative to the page or spread (or vertebral column, which I say - highly recommend for normal use...). This enumeration is used (see below) to "ViewPreference.rulerOrigin" and "ViewPreference" is in turn used as "Document.viewPreferences". This gives you the line

  app.activeDocument.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
  

  This defines the relative position. The absolute zero can be defined via a document property: Document.zeroPoint ("the origin of the rule, specified as contact page in the format [x, y]"):

  app.activeDocument.zeroPoint = [ 0,0 ];
  

  2. the methods that are in need of a proxy site all accept an AnchorPoint, which it can be "Left", "Top", "Center right" and so on as in the proxy form.

  But if you check the command PageItem, move , you can see there is nothing on the "anchor". It seems that this command uses only the anchor on the left for the "to" (for movement of which corner you use, it does not matter). It goes the same for PageItem.duplicate.

  If you want to experiment and play around a bit, you can read the 'current' setting as 'LayoutWindow.transformReferencePoint ': Control Panel

  alert ("Current setting is "+app.layoutWindows[0].transformReferencePoint);
  

  that shows one long on AnchorPointnumbers, or a newer version of InDesign, if I'm not wrong, the full name.

• How to set point by default in oneSelectChoice

  Hi guy. I have af:selectOneChoice with VO point.
  
  JSPX
  < af:selectOneChoice value = "#{.inputValue links ['Edit_RequestIdentityCardTypeId']}."
  Label = "#{.label links ['Edit_RequestIdentityCardTypeId']}."
  required = "true".
  Binding = "#{speedformula_EditRequest.selectOneChoiceDocType}" >
  < f: selectItems value = "#{.some links ['Edit_RequestIdentityCardTypeId']}."
  / >
  
  < / af:selectOneChoice >
  
  
  pageDef
  < list id = "Edit_RequestIdentityCardTypeId".
  IterBinding = "Edit_RequestIterator" StaticList = "false".
  ListOperMode = '0' ListIter = 'IdentityCardTypeIterator. '
  NullValueFlag = "1" NullValueId = "Edit_RequestIdentityCardTypeId_null" >
  < AttrNames >
  < point Value = "IdentityCardTypeId" / >
  < / AttrNames >
  < ListAttrNames >
  < point Value = "IdentityCardTypeId" / >
  < / ListAttrNames >
  < ListDisplayAttrNames >
  < point Value = "IctShortName" / >
  < / ListDisplayAttrNames >
  < / list >
  
  
  How to set default value oneSelectChoice?

  You can set the default value of the attribute in your VO. ensure that you give the default value is literal a valid value of your LOV. By this way, when it makes you see the default value set here to be selected.

• What is the setting point in v2 profile us Web Coated Swop of gain?

  Hey guys,.

  This may seem a bit of a n00b question, but I really can't find that info all what I Googled it.

  What is the point of setting default in v2 profile us Web Coated SWOP of gain?

  Let me explain my dilemma:

  My printer told me to use the US Web Coated SWOP v2 this profile for a catalog that we will print. 4/4 on gloss 100 # book stock. However, I have used this profile in the past and the prints came out darker as I expected. I don't have a printer of high enough quality to be able to test this in-house, but I am sure that my monitor is too bright or set a contrast too high level. They told me that their standard mast is approximately 10-15%

  I assumed the SWOP v2 profile 20% fattening as seems to be the default for most of the other color settings, but I've never known with certainty. I am trying to decide if I need to use a custom profile with a highest point gain setting.

  Thanks for any help!

  Kenzier

  Hello Kenzier,

  the U.S. Web Coated SWOP ICC profile contains a reproduction of the tones (CRT) curve

  which can only be described accurately by Dot Gain or Gamma.

  For entry into the color settings > Gray we can proceed as follows:

  Color settings > Gray > grey load > (click on) USWebCoatedSWOP.icc > save gray

  This saves a 'black-ink-profile' with a similar name, which replaces the Dot Gain

  or Gamma settings.

  This profile can be interpreted by the ICC profile Inspector (free) program:

  Here we have kTRC (shades of black ink reproduction curve), the red line.

  With the diagonal black auxiliary, it reads 20% efficient fattening,

  the blue line.

  

  The printer should tell you a representative profile (a good approximation)

  for its actual process.

  Cordially - Gernot Hoffmann

• How to set point without the use of fields values in the block of the branch action?

  Well, I'll try to say this in an easy way, isn't weird.
  
  I created a button, RECORD, which is a branch of the type of management: management of the function return A Page. This is my code for the branch:
  
  If: P2008_NAP_SUPPORTING_MATERIALS = "Yes" then
  return "2092";
  on the other
  return '2040';
  end if;
  
  The code for this type of service is stored in the block the ACTION of the direction of the page. The ACTION block for a branch of the type of direction: direction to the function return A Page is different from that of the ACTION block for a branch of type branch: branch Page or URL.
  
  I need to set some values of point with specific values, which I can do with a type of branch: branch Page or URL. This is not possible with the type of direction: direction of the function return A Page. The ACTION block is totally different.
  
  How can I set certain values on Page 2040 of 2008 Page say without using field block action of the branch?
  
  Thank you in advance,
  Maggie

  You must change the Source used to "only,...". "If you want the value passed to use instead of the value of the extraction of the line. However, in case you go to the page and look for the value of line-extraction used, you must pass in a flag of some sort, the presence or the absence of which can report a process header before or calculation to set the item null, allowing the extraction line value to use.

  Scott

• Set point for RichOutputText

  Hello!!

  I have a RichOutputText in my class:

              private RichOutputText usuarioLogado;
  //getters / setters
  //somewhere in a method:
              this.usuarioLogado = new RichOutputText();
              this.usuarioLogado.setValue(mesaUsuarioBean.getUsuarioLogadoMesa(m).getNome());
              AdfFacesContext.getCurrentInstance().addPartialTarget(getUsuarioLogado());
              RichPopup popup = this.getPopup();
              RichPopup.PopupHints hints = new RichPopup.PopupHints();
              popup.show(hints);
  

  and on the page:

  <af:popup childCreation="deferred" autoCancel="disabled" id="p2"
                                                    binding="#{AcessoMB.popup}">
                                              <af:dialog id="d3" title="Mesa em uso" type="none">
                                                  <af:outputText clientComponent="true" value="O usuario #{AcessoMB.usuarioLogado} está operando a Mesa. Você deseja forçar 'logof' deste Usuário?" id="ot3"
                                                                 inlineStyle="text-align:center; vertical-align:middle;"/>
                                                  <f:facet name="buttonBar">
                                                      <af:panelGroupLayout layout="horizontal" halign="right"
                                                                           styleClass="AFStretchWidth">
                                                         <af:commandButton text="Yes" id="yes" actionListener="#{AcessoMB.popUpAction}" partialSubmit="true"/>
                                                         <af:commandButton text="No" id="no" actionListener="#{AcessoMB.popUpAction}" partialSubmit="true"/>           
                                                       </af:panelGroupLayout>
                                                  </f:facet>
                                              </af:dialog>
                                          </af:popup>
  

  The problem I have, instead shows the ". getNome()" (it is a string) on the message, it shows me "usuarioO RichOutputText [UIXFacesBeanImpl id = j_id14] esta operando one Mesa. "Você quer forcar"logof"deste Usuario?"

  How can I display the actual value of the string "RichOutputText [UIXFacesBeanImpl id = j_id14]" instead on the value of my outputText?

  Thank you

  Well, it's what you're asking him to do what you copy the address of the instance of the RichOutputText. instead of using a richOutputText variabel use a normal string variable, add the getter and setter for the variable and use this:

  1. private String usuarioLogado;
  2. getters / setters
  3. somewhere in a method:
  4. this.usuarioLogado = (String) mesaUsuarioBean.getUsuarioLogadoMesa (m) .getNome ();

  It should work.

  Timo