Statically the PSA value constantly fall on DHCP

Similar Questions

• HP Envy 15-k233ca Notebook: Wifi constantly falls on the brand new HP Envy laptop.

  I always thought that if highly HP and as such, has decided to buy a laptop HP - HP Envy 15-K233ca laptop.

  I had a few problems early and one in particular, makes for an unpleasant experience.

  The wifi connection continues falling.  It drops when the system is put into mode 'sleep', when I surf on the net and even after a reboot.

  I went through the question (and a few others) with HP tonight and after 2 hours assistance service has encountered the same problem.  I'm now having to restart the computer and solve problems to try to maintain a wireless connection.  This is my first experience with an HP laptop and I'm disappointed.  It's unfortunate, but I may have to return it.  I'll walk to Apple for a replacement.   If someone from HP can solve this problem for once and for all, it would be useful. Otherwise, I will have no choice but to return the unit.

  Note: I noticed that others are experiencing the same issue.  I asked that the HP help desk install drivers to fix the problem.  If this does not work after our session tonight, then I fear, that it may be a hardware problem.

  Hello

  Thank you for taking the time to answer.  It seems that the box was already unchecked.  Good idea look even if, as others may have this checked and may, if all goes well in this solution.  I asked a tech support in India for download drivers that may correct the problem.  It seems to have worked.

  Thank you once again.

  Madison.

• Constantly get the alpha value

  Hi all

  I try to get the alpha value of the target film element, which is busy.

  When the alpha value is reached to a certain value, I want to trigger certain events.

  Is a way to get the alpha value of the target of the current image using the set list interval or one event?

  Any help would be appreciated, thanks.

  use:

  var getAlphaI:int;

  function getAlpha1() {}
  var alpha1:Number = BG1_mc.alpha;
  testTxt1.text = alpha1;
  {if(alpha1>=1)}
  clearInterval (getAlphaI);
  }
  }

  function curAlpha1() {}
  clearInterval (getAlphaI);
  getAlphaI = setInterval(getAlpha1,100);
  }

  curAlpha1();

• Battery Tecra M11-130 with not power and the fan runs constantly

  We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
  In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
  * Power *.
  Other costs 14%
  40% of energy consumption system
  Good battery
  * Temperature and fan *.
  CPU temperature 67%
  System internal temperature 56%
  88% fan speed

  I would like suggestions.

  > We have mounted a battery new but still only get about 1.5 hours.

  1.5 hours is a common value, you should consider that dough working time depends on its portable use.

  Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

  In addition, you said that the fan runs constantly this could discharge the battery too.
  Therefore, it would be interesting to know what process emphasizes the central unit.

  Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

  In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

• Satellite P300-156 - and the button Return give the same values

  Hello

  I have a satellite P300-156, and it has a numeric keypad.
  I have problems because the Enter key and the Return key give the same values. I believe that it is incorrect.
  Can anyone help.

  Key on the numeric keypad should give an input it does.
  the Enter key on the main keyboard should give a carriage return value, but it gives an input value.

  Usually this does not cause a problem, but with software like photo shop that makes the distinction between a carriage return and a hard fall it does not work.

  Can someone help me please

  Thank you

  Hello

  To my eyes the entry and return keys are the same keys that provides the same functionality.
  I really put t know why you believe that there is something not right

  By the way; Check if you are using the latest version of the BIOS!

• The point value of graphic display WPF overview

  Hello

  Y at - it an easy way to display the value of a point (with formatting similar to a slider) flying over when the mouse point? I use the chart control WPF (MStudio 2013) with several plots represented graphic on an AxisDouble. (y-axis) and AxisPrecisionDateTime (x axis). Let me know if you need more information and thanks in advance.

  When a Cursor is set to align the data, it uses the FindNearestValue method to find the value of land near. When it is not set to align the data, he reports the value of the current screen with the ScreenToData method. The following code example shows how to use both to display the current value of the mouse on a chart using a ToolTip:

  private static readonly GraphQueryArgs query = new GraphQueryArgs(

        PlotsToSearch.Any, SearchDimensions.HorizontalAndVertical,

        SearchDirections.ForwardAndReverse, isInclusive: true );

  public MainWindow( ) {

        InitializeComponent( );

  graph.PlotAreaMouseMove += this.OnPlotAreaMouseMove;

        graph.PlotAreaMouseLeave += delegate { graph.ToolTip = null; };

        ToolTipService.SetInitialShowDelay( graph, 0 );

        ToolTipService.SetShowDuration( graph, int.MaxValue );

    }

  private void OnPlotAreaMouseMove( object sender, MouseEventArgs e ) {

        IPlot plot = graph.AllPlots[0];

        Point screenPosition = graph.GetPlotAreaPosition( e );

        IList pixelValue = graph.ScreenToData( plot, screenPosition );

        string tip = string.Format(

            "Absolute value at point {0} is {1}.",

            screenPosition, FormatValue( pixelValue ) );

        Point relativePosition = graph.ScreenToRelative( screenPosition );

  PlotValue nearestValue = graph.FindNearestValue( plot, relativePosition, query );

        if( nearestValue != null )

            tip += Environment.NewLine + string.Format(

                "Nearest value on {0} is {1}.",

                nearestValue.PlotObserver.Label,

                FormatValue( nearestValue.Value ) );

  graph.ToolTip = tip;

    }

  private static string FormatValue( IList values ) {

        return string.Join( ", ", values.Cast

    }

• Subtract value of the signal of the current value 2 seconds ago

  Hello

  I'm relatively new to LabView, but I went through the Forums and google a lot and have not found a solution. I have this problem:

  I have an analog signal from my USB6009 DAQ of NOR. I want to take the signal I got 2 seconds ago and subtract its value to the current value. And I want to do it countinously.

  My data are acquired 1 sample on request by NIDAQ Deputy in while loop.

  Signal result should be something like:

  Y = y - y(t-2), where there is a result and there is a signal of NIDAQ.

  Can you help me or anything else you need to know to help me? Thank you.

  You must use a ring instead of the shift register buffer.

  

  Your signal source must be configured to read constantly (take readings more (best would be multiple of line period) and average)

• The rounding value

  How can I round the double value of a not given numbers fraction, Say for example: my double is 10.222222222 for this issue, I want only 10.22 and 10.899999 for that 10.90

  How can I do this task?

  I wrote getDoubleValue (double) method that rounds the fractional pats

  public static double getDoubleValue (double value) {}
  Dim str As String = String.valueOf (value);
  int index = str.indexOf ('.) ', 0) + 1 ;
  String integer = str.substring (0, index-1);
  Decimals of string = str.substring (index);
  If (decimal.length)< 4)="">
  Returns the value;
  }
  isPre boolean = true;
  int i;
  for (I = decimal.length () - 1; i > 3; i-) {}
  Val As Char = decimal.charAt (i);
  If (val > = '5' & val)<= '9')="">
  isPre = true;
  } else {}
  If (isPre & val == '4') {}
  isPre = true;
  } else {}
  isPre = false;
  }
  }
  }
  decimal = decimal.substring (0, i);
  If {(isPre)
  int val is (Integer.parseInt (decimal) + 1);.
  {if(Val>=1000)}
  Integer = String.valueOf (Integer.parseInt (Integer) + 1);
  decimal = '0 '.
  } else {}
  decimal = String.valueOf (Integer.parseInt (decimal) + 1);
  }
             
  }
  return Double.parseDouble (integer + "." + comma);
  }

• Permanantly disabling "Install Google Toolbar" and change the default value for future updates

  I use Adobe products for years and, in general, is that Adobe produces some really useful tools for users of computers and productivity.  Thereby, ever time I get notice of an 'Adobe Flash Player' update I have to answer the same questions during the update / install process.  During the installation of the installation application ask if I want to install the toolbar 'Google', and the default value is Yes, then I have to uncheck the box before installation or I receive the software on my system I do not want or do not want.  In addition, towards the end of the update, the installation application provides three options on future updates:

  (1) download and install automatically

  (2) ask before installing

  (3) never install...

  And each installation I have to uncheck the installation of "Google Toolbar" and tell them that Adobe 'ask me... ' "before you download and install future updates.

  Is it possible permanently disable toolbar Google and by default my response to the update download and install question to always be 'Ask Me' first?  Adobe's witnesses crossing the machine during this process, so please do not suggest that it is not possible.  Adobe simply needs to modify the setup package to find these cookies and apply preferences users for the installation process instead of constantly trying to push unwanted applications and choices to the user.

  The displayed offers are based on the OS and the browser used.  If the two of you are essentially correct, for the browsers you use.

  If you opt in background updates, update option = allow Adobe to install updates (recommended), Flash Player will be updated within 24 hours of a new version is released.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) all drive types are updated within 24 hours of the new versions available.

  If you opt in notification updates, update = option Notify me when updates are available, the update notification generally appears within 7 days of an update is available and it is after that the system was restarted or that you log on/off voltage.   Opting to put up-to-date will launch the browser to a download page to download and install Flash Player.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) as the type of player who set the notification of update is updated.  The other type of player is not updated.

  Essentially, opting in the background updates will update all types of drive on the system within 24 hours and avoids downloading accidentally offers from third-party vendors.

  Note: there are slight differences for OS X updated behaivour but since you have Windows I described the behavior under Windows.

• Inside af AF:selectOneChoice: table sometimes does not display the appropriate values, based on the results of the query of the view object

  Hello

  I use jdev 12.1.2.

  I have a few components of af: selectOneChoice that is contained in an af:table element.  The table is extracting lines from database and display data.  Now here's the weird part: sometimes the component of selectOneChoice will have the correct value selected, and other times it will be just left unchecked.  I can verify that the data in the object view lines are indeed correct after I request them.  The LOV for soc components are properly set up (some are configured as static list display objects and some are set up as model driven lists based on display objects).  I have just completely puzzled me as to why they work sometimes and then not work at times even though I am following the exact same steps to reach that point in my application.  Someone at - he never meets this problem before?

  Thanks for reading.

  Problem solved!

  For anyone having this problem in the future: do not try to do a partial trigger on a table that is not in the visible panelTab.  The problem is that when my view criteria applying, I was refreshing the TWO tables.  This caused that was not visible to lose the selectOneChoice selection, while the other table was very good.  Remove the partial relaxation for the table that was not visible caused the data to be maintained properly during the exchange between the tabs and change the view criteria.  Thanks for the help again Ashish, stumbled on the real root of the problem, after following some of your suggestions.

• By the way the item values without using the URL for it

  Hello

  I want the value of an element to another page.

  Is there a good tutorials on it? I don't want to use the URL for it, if you understand what I mean.

  Also I would like to learn more about session state in the apex and how it works and how I could display a value of an element stored in the session state. So if you have some good reads on that I would appreciate it.

  d6752e93-BC8D-48f1-b3ef-073ab316b748 wrote:

  Update your profile with a readable handle.

  Also, how do I acsess an element that was previously presented on a page.

  A value of element are accessible anywhere in the APEX using the syntax of reference described in the documentation appropriate session state. The required syntax depends on where the item is referenced. In general, use bind value [: MY_ITEM] syntax in queries SQL for APEX and PL/SQL expressions and blocks; the functions V and NV [V ('MY_ITEM')] in stored program units; and the substitutions of static text [& MY_ITEM.] in the properties of code, templates and HTML component. The actual value returned will depend on where the item is referenced in the APEX show/accept treatment.

  For example that I want to fill a text field empty with a value of an element that has been filled with front page.

  What do you mean by "an element that was filled in front page? Before what? By the presentation of previous page? On the same page layout or a different page?

  Please try to make your questions more clear: How to ask questions

• Need to remove the advanced values in VMX file

  Former Director elected to harden all VMs VMX files in order to avoid interruptions in service unwanted individuals manual installation of the VMware tools upgrades.

  I agree with him and understand in previous versions, it was a good idea to disable these but now with 5.1 with the fact that we have more to restart for the modernization of the tools happen my life has become much more complicated and we constantly have problems with VM with mounted tools and no way forced to disassemble the tools.

  I am looking for PowerCLI script to remove these advanced values in the VMX file for all the virtual machines attached to a vCenter. I guess these are the following values:

  isolation.tools.autoInstall.disable = true

  isolation.tools.guestInitiatedUpgrade.disable = false

  insulation. Tools.connectable.Disable =true

  If there are other values that I should check, please let me know and I will review the VMX file.

  This is another option, but lines will remain in the VMX, albeit with different values

  You can do it with this script

  $vm = Get-VM -Name MyVM
  
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec$spec.tools = New-Object VMware.Vim.ToolsConfigInfo
  
  $extra1 = New-Object VMware.Vim.OptionValue$extra1.Key = "isolation.tools.autoInstall.disable"$extra1.Value = "false"$spec.ExtraConfig += $extra1$extra2 = New-Object VMware.Vim.OptionValue$extra2.Key = "isolation.tools.guestInitiatedUpgrade.disable"$extra2.Value = "true"$spec.ExtraConfig += $extra2$extra3 = New-Object VMware.Vim.OptionValue$extra3.Key = "isolation.tools.connectable.disable"$extra3.Value = "flase"$spec.ExtraConfig += $extra3
  
  $vm.ExtensionData.ReconfigVM($spec)
  

• Copy the default value from another field in the same page

  Hello

  I need to pass a value from one page to another page and I want to use this key as DEFAULT VALUE for a field.

  If I create a form tabular all it's ok, but if I create a normal page. I am not able to do that.

  1. 1. I call the page and I pass the value. I also have a FIELD of VIEW and I can see the correct value.
  2. 2. I create a field with attributes of this:
     1. a. source > Source = database column type
     2. b. sources > Source value or expression = FK_ID_DA (the column name)
     3. c. default > default = P27_PK_ID_DA (the field that contains the value)
  3. 3. on the screen, I see P27_PK_ID_DA and not the value

  Where is the error?

  Thank you very much

  TexasApexDeveloper wrote:

  You missed one: before the variable, without it, the default value is the string...

  Not sure that you can READ the other pages... Such that if you are on Page 27 and have a field that you want to use on page 30, page 27 is presented and its items in session state, you can 'see' on page 30.

  So, if you set the default value: P27_PK_ID_DA, then you should get by default, you are looking for...

  Only if the default value Type is set on the PL/SQL Expression. If the literal value "P27_PK_ID_DA" is seen then the Type of default value should currently be set static text with Substitutions of State of Session, in which case the value of session state must be referenced using the syntax of substitution string:

  &P27_PK_ID_DA.

• Dynamically set a value based on the selected value of LOV

  Apex 4.2

  I can't create a dynamic action to set a value. I have used dynamic actions to hide and display areas but for some reason any cannot set a value.

  I have a list of selection-> P101_LIST. Type of source is "Column of the database". Source of value or an expression is "person_id" the query is as follows:

  Select first_name, person_id
  From Persons
  

  I have a display-> P101_DISPLAY value. Source type is 'static Assignment. The source value or expression that I left blank.

  I would like for each time the user selects a name of P101_LIST, the P101_DISPLAY element is updated to display the value (person_id) correspondent.

  Because there are other page elements / information on the page, I prefer that to not submit / update of the page. Would not want other page elements / information update.

  Any help on this would be greatly appreciated. Thanks in advance.

  Hello

  Create a DA:

  -event onChange P101_LIST

  -Action: PL/SQL

  -PL/SQL code:

  : P101_DISPLAY: =: P101_LIST;

  What to submit: P101_LIST

  Point of return: P101_DISPLAY

  And in fact.

  Kind regards

  Joni

• Change the default value for new messages of the 'paragraph' in "text" format the answer currently online because it does not work

  The answer currently online for this problem said to follow the sequence "tools-options-composition" and then change the default value, but this sequence "tools-options-composition" does not exist in Thunderbird (at least in the version I have, 45.4.0). Under 'tools', there is no option 'options... '

  It can depend on what menu you look and which operating system you are using.

  Tools | Options | Composition refers to the menu bar on top old.

  You can use alt or F10 to make the menu appear temporarily. Go to the view of . Toolbars and check the boxes if you want it constantly on the show.

  If you use the button 'Menu of the Application' new fashion (with three horizontal lines - see the attached picture) then it's probably Options | Options | Composition -I say 'probably' because I'm on Linux where 'Options' are replaced, I think that, by "Preferences". Another complication with this infernal Application Menu is that different things happen depending on whether you click or hover. Place the cursor on the Options of the first and the second appears after some time.

  See http://kb.mozillazine.org/Menu_differences_in_Windows, _Linux, _and_Mac of the differences in Windows, Mac and Linux menus.