status 0xc000014C

Similar Questions

• Error "Windows failed to load, status: 0xc000014c" when starting.

  Original title: help Edition Vista Home basic 32

  my pc has stopped working it is an acer aspire m1610, all I get is file: / windows/system32/config/system status: 0xc000014c windows failed to load because the system registry file is missing or damaged.    I tried to use my disc drivers and restore dvd does not...

  You have the Vista DVD?

• Windows could not start. Status: 0xc000014c

  I had a Final message on my computer when I started my computer, instead of going to Windows, it will put in place then fanally this message.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  Status: 0xc000014c

  File: \Boot-BCD

  Status: 0xc000014c

  Info: An error occurred trying to read the boot configuration data.

  I did not "Windows installation disc", it needs to restart the computer.

  Where can I get this for my 'Windows Vista', because it is a very old from the beginning of 2007 version, please notify Dell INSPIRON 1501.

  Thank you

  Kind regards

  Imtiaz.

  Hello

  Note:

  Will need you the Windows Vista follow these steps. You can get in touch with the manufacturer in case you have Windows Vista preinstalled on the computer for using the Windows Vista DVD recovery system.

  Method 1:

  Do the Startup Repair.

  Reference:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  To solve the problem with the data (BCD) configuration of startup, you can check the link below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• Vista, computer dell, a missing or damaged system registry file status: 0xc000014c

  Hello
  My dell computer came up with an error message:

  "Leader: \windows\system32\config\system.
  Status: 0xc000014c
  Restore system file is missing or damaged. »
  I would be grateful for any suggestions on how to address this issue. I tried a number of things, but without success.
  Thank you.

  Hi ange.l,

  1. When did you start to question?

  2. do you rememeber to make changes to the computer before this problem?

  3 have you tried booting in safe mode?

  Step 1:

  You can try to start in safe mode and check if the problem occurs.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are unable to boot into safe mode, then perform a startup repair

  If you have startup repair as an option of recovering preinstalled on your computer, then you can try that. Otherwise, you need a disk for Installation of Windows Vista to perform the Startup Repair.

  Startup Repair is designed to detect the operating system startup problems and troubleshoot all found and corrected with little user interaction.

  For more information, see the links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• file 0xc000014c error code: \windows\system32\config\system

  The power blew home, when I tried from my computer, the error message appears

  Cannot start Windows, a recent hardware or software change might be the cause. TO solve the problem:

  1, insert your windows installation disc and restart your computer

  2. choose your language settings, and then click "Next".

  3. click on "repair your computer".

  If you do not have this disvc, contact your system administrator or computer manufacturer for assistance.

  File: \windows\system32\config\system

  Status: 0xc000014c

  Info: windows could not load because the system registry file is missing or corrupt.

  I have a reinstallation dvd, which was given by dell when the computer came, but wanted to know if it would be delte all my files on the computer, because I have not backed them up recently and have important information on the computer.

  It allows me to start in the mode without failure or last known good configuration option.

  Help, please

  Thank you

  Hi nav singh,.

  Reinstall Dell drive is the installation as well as full disk, we can use it to perform the startup on computer repair.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0xc000014c error at startup

  Hello

  I have been using Windows Vista on my NET built office for a few years now but recently I had to force a shutdown after a crash of the game and the computer become unresponsive for a while.  I am now unable to boot and taken directly to the Windows boot manager with the following screen

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\config\system

  Status: 0xc000014c

  Info: Windows could not load because the system registry file is missing or corrupt.

  ENTER = continue ESC = exit

  By pressing ENTER I am taken to Boot Options where all choices (Safe Mode) (last known Config etc) take me to the Windows Boot Manager initial screen and I can't get past the boot.  A large number of responses I've seen because that require you to connect through the safe mode and run a system restore which I am unable to do.

  I have not a paper copy of the recovery disc I understand could help.  Is there a way to get your hands on a copy of it?  Nevertheless, any help would be greatly appreciated.

  Richard

  Hi Richard,

  If you are looking for a recovery disk, you must contact the manufacturer of the computer for the same.

  If you can organize a disc of the full version of Windows Vista, then you try to perform a repair restoration and commissioning of the system of Windows recovery environment tio fix the issue.

  For more information, see the following article:

  What are the system recovery options in Windows Vista?

• Windows Boot Manager

  HELP I have a laptop A210 series and I have it turned on this morning to find the following message is displayed:
  Windows Boot Manager.
  Windows could not start. A recent hardware or software change might be the cause. To solve the problems:
  1. Insert your windows disk installation and restart your computer.
  2. choose your language setting, and then click Next
  3. click on repair your computer

  If you do not have the disk, contact your manaufacturer of computer or the system administrator.

  File: \Boot\BCD
  Status: 0xc000014c
  Info: an error occurred trying to read the boot configuration data

  I tried to restart the computer by pressing F8 without result

  I found what I think, it is the "product recovery" disk recovery Windows vista Home premium

  Please help I am a novice in computers but will try my best if you give me guidance. I really don't want to lose what I have on the computer, because it is really important for me

  Thank you

  If you have not some data on the best HARD drive for you is important to install the operating system using supplied recovery disk.
  After doing this you should clean Vista pre-installed and all will be well.

• Boot Manager Windows couldn't start?

  I have an advent netbook that is not a hard drive. my laptop suddenly stops while I use it and when I turn it on it says that you cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (I CAN'T DO THIS BECAUSE I HAVE NO DISC DRIVE IN MY NETBOOK)
  2. choose your language settings, and then click "next".
  3. click on repair your computer.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.
  I'm not a very experienced user and I don't have any idea what to do!
  any help? THIS IS URGENT.

  Hi Emma,

  ·         You have Windows XP or Windows Vista/7?

  Check to see if the following is useful.

  Method 1: Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration - Windows Vista/7

  How to start your computer by using last good known Windows XP Configuration

  Method 2: Note: Check if you have the repair your computer option in the advanced boot menu.

  If you do, perform a startup repair, check to see if it helps. (For Windows Vista/7 only)

  Startup Repair: frequently asked questions - Windows 7

  Startup Repair: frequently asked questions - Windows Vista

  Respond with more information so we can help you best.

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• How to troubleshoot a failed transplant recovery?

  Hello

  I tried to click on "Start Windows normally" but when I do it directs me to the "Windows Boot Manager" page & says:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc, and then restart your computer.
  2. Choose your language settings, and then click "next".
  3. Click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\config\system

  Status: 0xc000014c

  Info: Windows could not load because the system registry file is missing or corrupt.

  and the biggest problem is that I do not have a cd of windows with me as it came pre-installed vista, I presume... Please suggest what I do... more details...

  1. When I press on enter it leads me to windows Boot Manager screen and asks me to choose an operating system...
  2. I have only vista as a listed option and when I select that and enter and it brings back me to the recovery page error windows even to choose "Safe Mode" option and other...
  3. I even tried to make the windows memory diagnostic test, but it doesn't seem to help, and I think it seems totally out of context for me if I'm wrong please correct me.
  4. And by the way, mine is a Sony Vaio laptop... and I don't really know what to with the F8 options when I start the computer I mean that's what I don't know if I force wanting to take risks and do everything jump.

  Please help me, I hope I won't be losing my data...

  //
  MessageId: STATUS_REGISTRY_CORRUPT
  //
  MessageText:
  //
  {The registry is damaged}
  The structure of one of the files containing registry data is corrupted, the image of the file in memory is damaged or the file could not be recovered because the other copy or a newspaper is missing or corrupted.
  //
  #define STATUS_REGISTRY_CORRUPT ((NTSTATUS)0xC000014C L)

  Restore the factory setting of your laptop from Sony. Backup your personal data before you do. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Vista will not solve, goes directly to the start of the repair/cannot fix the problem.

  It says wwindows faid load because the system registry file missisig or corrupted.lve tried everything, and he always comes back to the same tried message.even now the key f8 during the restart and no matter that l can't just back.can help you please and thankyou.also says status: 0xc000014c if this helps

  Hello
   
  1. don't you make changes before the show?
  2. who is the manufacturer of the system?
   
  We checked for error "status: 0xc000014c ' and the troubleshooting step for this problem is to perform the Startup Repair by using the Vista DVD. To do this, follow the steps mentioned below:
  1. Insert the installation disc into the CD/DVD ROM.
  2. restart your computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
  8. once the Startup Repair tool is completed, remove the Vista DVD from the CD/DVD ROM and restart the computer as usual.
   
  For more information about the Startup Repair, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  IMPORTANT: If the startup repair does not resolve the problem, you can choose "System Restore" Windows recovery environment and check the result.
   
  If you do not have the Vista DVD, and then contact the manufacturer of the system for more support options.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• People scan status

  On my MBP, I see the the following information when I click on people in the sidebar of Photos.

  

  However, when I click on the people in my 27 iMac it goes always directly to page list all the people who exist in the data of my people.

  Is it possible to get the status information shown above for the MBP?

  If there is no statue, then the analysis is completed on this system

  LN

• Sierra, stuck in the 'Downloaded' status

  The Sierra dmg has failed with an error "invalid checksum". I would like to re - download the file to see if it has been altered during the download - but the app store has the gray Sierra drop-down selection in a status of "downloaded".

  How can I redownload the dmg file and try again?

  Finder > Applications

  Don't you see macOS Installer Sierra?

  If so, place the macOS Installer Sierra in the trash and try to download it again.

• Disappears from the status bar

  When I'm away from mobile data my status bar disappears.

  What mobile data?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings