Status bar at the bottom of the screen will not allow

Similar Questions

• Hi everyone, I have a downloaded version of Lightroom 5 (not the online version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Hi everyone, I have a downloaded version of Lightroom 5 (not the web-based version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Help is appreciated.

  Have a great day,

  Omar

  Hi Omar,.

  Could if it you please let me know are you not capable of working in the develop Module?

  Or is the Panel on the right in gray?

  Also could you please attach a screenshot.

  Kind regards

  Tanuj

• In an attempt tp install I-tunes, I said "the administrator will not allow him" - what can I do?

  I try to install I-Tunes, but my Vista system does not end.  At the end of installation, I get a message indicating that the administrator will not allow the program to add.  I have had no problem in the installation of I-Tunes on my other PC with a system 7.

  Hello

  (1) did you of recent changes to the system before the show?

  (2) are you connected to the system as an administrator?

  (3) what is the exact error message?

  Method 1:

  Follow the links below to solve problems and then try to install iTunes and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: Uninstall and reinstall iTunes.

  Follow the article mentioned below to uninstall and reinstall iTunes in high mode and check if this solves the problem.

  Uninstall and reinstall iTunes.

  http://support.Apple.com/kb/HT1923

  Also visit the below mentioned link.

  http://support.Apple.com/kb/ht1926

  http://support.Apple.com/kb/TS1331

  It will be useful.

• Problem in the scroll bars when the screen is not any field focus...

  Hi all

  I have a screen on which I need to display a list of items. and the list total appears at the bottom of the list. everything works fine if the lily a few number of lines. but as soon as the number of rows and Lily exceeds the length of the screen, there is the problem. I don't see the total at the bottom because I can't scroll the list. Here is the code in my class. in the class list, I use a CustomGridManager, which shows data in a table (I downloaded it). I made a few changes in the present. the code for this handler is also attached. Please tell me what changes should I make, so that the screen can be the object of a scroll. (Please go through the code)...

  SerializableAttribute public class MyClass extends {screen

  public MyClass (dataList DataList []) {}

  Super(Manager.VERTICAL_SCROLLBAR |) Manager.VERTICAL_SCROLL);

  Super();

  int noOfColumns = 2;

  int noOfRows = dataList.length;

  int [] columnWidth = {50.50};

  CustomGridManager gfmHeader = new CustomGridManager (noOfColumns, 0, columnWidth);

  Adding headers

  LabelField lblHdrCol1 = new LabelField ("Col1");

  gfmHeader.add (lblHdrCol1);

  LabelField lblHdrCol2 = new LabelField ("Col2");

  gfmHeader.add (lblHdrCol2);

  VerticalFieldManager vfmTitle = new VerticalFieldManager();

  vfmTitle.add (new LabelField ("my class"));

  vfmTitle.add (gfmHeader);

  setTitle (vfmTitle);

  Addition of body

  GFM CustomGridManager = new CustomGridManager (noOfColumns, 0, columnWidth);

  for (int i = 0; i)< noofrows;="">

  LabelField lblICol1 = new LabelField (dataList [i] .getCol1 ());

  GFM. Add (lblICol1);

  LabelField lblICol2 = new LabelField (dataList [i] .getCol2 ());

  GFM. Add (lblICol2);

  Adding a footer

  CustomGridManager gfmFooter = new CustomGridManager (noOfColumns, 0, columnWidth);

  LabelField lblFtrTotal = new LabelField ("Total");

  gfmFooter.add (lblFtrTotal);

  LabelField lblFtrValue = new LabelField ("CalculatedValue");

  gfmFooter.add (lblFtrValue);

  Add (gfmHeader);

  Add (new SeparatorField());

  Add (GFM);

  Add (new SeparatorField());

  Add (gfmFooter);

  Add (new SeparatorField());

  }

  ======================================================

  SerializableAttribute public class CustomGridManager extends Manager {}

  private int [] columnWidths;

  private int [] staticColumnWidth;

  private int columns;

  private int allRowHeight = - 1;

  /**

  * Built a new CustomGridManager with the number of columns specified.

  * Lines will be added to the need to display the fields.

  * Fields will be added to the grid in the order they are added to this Manager.

  to complete each row from left to right:

  *

  * For example, a Manager 2 column:

  *

  * [Field1] [Field2]

  * [Field3] [Field4]

  * [Sphere5]

  *

  * Column widths are equal, and the Manager will attempt to use the entire available width.

  Each line height will be equal to the height of the field higher in the same row.

  * Styles positional field are met, then the fields that are smaller than the row/column

  * they can be set to left, right, up down, or centered. They have by default at the top left.

  *

  @param columns number of columns in the grid

  @param style

  */

  public GridFieldManager (columns int, long style) {}

  Super(Manager.VERTICAL_SCROLLBAR |) Manager.VERTICAL_SCROLL);

  Super (style);

  This.colonnes = columns;

  }

  /**

  *

  @param columns columns number of columns in the grid

  @param style

  @param columnWidths width of each column in a table

  */

  public GridFieldManager (columns int, long style, int [] columnWidths) {}

  Super(Manager.VERTICAL_SCROLLBAR |) Manager.VERTICAL_SCROLL);

  Super (style);

  This.colonnes = columns;

  this.staticColumnWidth = columnWidths;

  }

  protected boolean navigationMovement (int dx, int dy, int, int time status) {}

  int focusIndex = getFieldWithFocusIndex();

  While (dy > 0) {}

  focusIndex += columns;

  {If (focusIndex > = {getFieldCount())}

  Returns false; The focus moves on this manager

  }

  else {}

  Field f = getField (focusIndex);

  If (f.isFocusable ()) {/ / only move the focus on the fields of the object of focus}

  f.setFocus ();

  -DY;

  }

  }

  }

  While (dy< 0)="">

  focusIndex = columns;

  If (focusIndex< 0)="">

  Returns false;

  }

  else {}

  Field f = getField (focusIndex);

  If (f.isFocusable ()) {}

  f.setFocus ();

  DY ++;

  }

  }

  }

  While (dx > 0) {}

  focusIndex ++;

  {If (focusIndex > = {getFieldCount())}

  Returns false;

  }

  else {}

  Field f = getField (focusIndex);

  If (f.isFocusable ()) {}

  f.setFocus ();

  -DX;

  }

  }

  }

  While (dx< 0)="">

  -focusIndex;

  If (focusIndex< 0)="">

  Returns false;

  }

  else {}

  Field f = getField (focusIndex);

  If (f.isFocusable ()) {}

  f.setFocus ();

  DX ++;

  }

  }

  }

  Returns true;

  }

  protected void sublayout (int width, int height) {}

  int y = 0;

  columnWidths = new int [columns];

  If (staticColumnWidth == null: staticColumnWidth.length)<= 0)="">

  for (int i = 0; i)< columns;="" i++)="">

  columnWidths [i] = width/columns;

  }

  } else {}

  for (int i = 0; i)< columns;="" i++)="">

  columnWidths [i] = (width * staticColumnWidth [i]) / 100;

  }

  }

  On the field [] fields = Field [new columnWidths.length];

  currentColumn int = 0;

  rowHeight = 0 int;

  for (int i = 0; i)< getfieldcount();="" i++)="">

  fields [currentColumn] = getField (i);

  layoutChild (fields [currentColumn], columnWidths [currentColumn], height-y);

  If (fields [currentColumn] .getHeight () > rowHeight) {}

  rowHeight = fields [currentColumn] .getHeight ();

  }

  currentColumn ++;

  {If (currentColumn == columnWidths.length | I == {getFieldCount () - 1)}

  int x = 0;

  If (this.allRowHeight > = 0) {}

  rowHeight = this.allRowHeight;

  }

  for (int c = 0; c)< currentcolumn;="" c++)="">

  long fieldStyle is fields [c] .getStyle ();.

  int fieldXOffset = 0;

  long fieldHalign = fieldStyle & Field.FIELD_HALIGN_MASK;

  If (fieldHalign == Field.FIELD_RIGHT) {}

  fieldXOffset = columnWidths [c] - fields [c] .getWidth ();

  }

  Else if (fieldHalign == Field.FIELD_HCENTER) {}

  fieldXOffset = (columnWidths [c] - fields [c] .getWidth ()) / 2;

  }

  int fieldYOffset = 0;

  long fieldValign = fieldStyle & Field.FIELD_VALIGN_MASK;

  If (fieldValign == Field.FIELD_BOTTOM) {}

  fieldYOffset = rowHeight - fields [c] .getHeight ();

  }

  Else if (fieldValign == Field.FIELD_VCENTER) {}

  fieldYOffset = (rowHeight-fields [c] .getHeight ()) / 2;

  }

  setPositionChild (fields [c], x + fieldXOffset, y + fieldYOffset);

  x += columnWidths [c];

  }

  currentColumn = 0;

  y += rowHeight.

  }

  If (y > = height) {}

  break;

  }

  }

  totalWidth int = 0;

  for (int i = 0; i)< columnwidths.length;="" i++)="">

  totalWidth += columnWidths [i];

  }

  setExtent (totalWidth, Math.min (y, height));

  }

  }

  Do you really want now fields is active.

  You can try adding a NullField after your Manager - a NullField is active, if it does not size.

  Other than that, you can try the substitution of navigationMovement and Manager.setVerticalScroll to go up and down the window scrolling.  I think it should work, although I never did.  You can control the scope of the first Manager to ensure that you do not have to scroll through to the end.

• Whenever I have press F11 or click full screen, my address bar and the tabs will not go down as they normally do. How can I fix it?

  I recently hooked another monitor to my laptop, that was when the problem occurred, but even after restarting Firefox * and * my computer, it did not always work. By collapse, I mean when you press F11, the open tabs and the address bar appear smaller, and then they slide up until what you don't see it (unless you mouse over). Please help me solve this =)

  Thank you!

  You can right click on the tab bar or the Navigation bar mode full screen (F11) and make sure that "Hide toolbar" is enabled.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My dell Inspiron 1150 windows xp password son has locked and the screen will not change, we do not know the password or have we not the reset disk, how can connect to reset password

  My dell Inspiron 1150 windows xp password son has locked and the screen displays the dell logo and says that I need the master password or administrator, my son can't remember and we do not have the reset disk, is it possible to get and reset the password or enter the system

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of your normal connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Tricky

• The printer will not allow the default printer

  Adobe will not print file, said printer must be installed
  .  OfficeJet 6500 removed and reinstalled.  When installing the message says "cannot set as default printer".  Fix Microsoft, he says that he cannot solve the problem. Help, please.    Problem is recent.

  Hi Jerry93306,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to print using applications such as WordPad or Notepad Windows?

  4. what Microsoft fixit tool you have installed on the computer?

  See the link below and try the steps mentioned, if you get the error message when you print from Adobe applications.

  Error "you must install a printer.

  http://kb2.Adobe.com/CPS/409/kb409119.html

• the box will not allow OK to be selected to activate it.  What should I do?

  I bought Adobe Sketch 7 stand-alone license and I enter the product key and the number sereal but OK to enter the information does not become active, so I can submit the information.  What should I do?

  -Chris

  Hi Chris,

  I think you have Adobe Photoshop sketch confused with another product. Adobe Sketch is a drawing mobile application and does not require a serial number or product key.

  Sue.

• A yellow bar in the timeline will not be rendered

  It seems that others have had this problem and it did not,

  First Pro CC 2015.2 version.

  I tried to make' whole work space,"I tried to put one at point but he lost my" make to the and outputs.

  How to return the yellow bars, it no longer works.

  File attached

  Reach out is only available when the work of the cut area bar.

  Change the in and out point and make selection will appear.

• I installed a new router. Now, one of the PC will not allow the rest of the pc s are there to connect. He is able to connect to each computer on the network. I can't find the question, any help?

  I have checked the computer name, sharing, turned off the firewall.  Still can't find the question.

  I've corrected in fact accidentally the problem today.  I uninstalled a Malware program and tada!, the other pc on the network were immediately able to access the XP pc.  The 'good' pc was always able to access internet, router, network between them.  The only problem we had was the 'bad' pc was able to connect at all, but the 'good' pc were unable to connect to the computer of 'bad '.

• Moving from one box to check if the needle will not allow resizing when not not using arrows

  Moving a box which was resized if small pointer will only resize diagonally or vertically. It is impossible to use the arrow keys. Is it possible to retrieve and move an object by clicking on it and possibly pressing another button or something similar?  Thank you

  Zoom a lot and you will be able to enter the central part of the field and

  Move it.

  One game, June 25, 2015 at 04:46, tonyp15249544 [email protected]>

• By mistake, I downloaded a program called driver of dog. But now the program does not allow me the 'uninstall '. Help! Thank you

  Recently downloaded a program called 'dog driver.  It was a mistake.  But when I went into Control Panel to use the feature to "Uninstall" to remove the program... the program will not allow the uninstall feature to remove it.  Any suggestions?  Thank you

  If the Control Panel does not remove the software, you can use an uninstall program:

  Revo Uninstaller - if she is not fully removed - follow the link and download the free version:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• How to remove the status bar at the bottom of the browser full screen

  We have an application that is running in mode full screen for public display, so having the popup status bar at the bottom of the screen is annoying when it moves between pages is distracting and takes away from the experience of the user.
  How to turn off the status bar so that it is no longer appear when the browser is in full screen mode?

  Or you hear the floating message that describes the current activity of the browser (for example, waiting...) or displays the URL of the link currently hovered?

  Which can be deleted using custom style rules. Here is an example of a thread on how you could do this:

  How can I disable the popup to address link at the bottom of the page?

  It is from Firefox 25. It still works in Firefox 30?

• How Javascript to work? It is enabled in options, but nothing happens when I select something that starts "javascript" on the status bar at the bottom of the screen.

  When I tried to download a file from the Canon U.S.A., I clicked on the button "I agree - begin download" and nothing happened. The information contained in the status bar at the bottom of the screen, when the mouse cursor is on the download button is "javascript:downloadFile(). I followed from the error console-
  Error: The stylesheet http://www.usa.canon.com/wsss/GeneratedPages/wsss_xsl/global.css was not loaded because its MIME type "text/html", is not "text/css".
  Source file: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/i_series/i950_series?selectedName=DriversAndSoftware

  There are also many warnings on the analysis of the orders.

  This kind of thing seems to happen every time that whenever that javascript is involved.

  Make sure that you do not block the JavaScript settings and preferences for interactive web pages

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox