Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support
Hello
I work with card 4461.
When writing the data on the card I get this error
The channel which has been set up had
Update rate: 9210
None of the samples: 87643
Sample mode: finite samples
Sync: Synchronization with AI0 even of the same device
The values lie between 6 V and 1 .2V
error occurred in the function
{Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}" The Stack Trace: «to nNIMSSAIL100.StatusObserverT<><>
to nNIMSSAIL100.StatusObserverT<><> to nNIMSSAIL100.StatusObserverWrapperT<><> to nNIMSSAIL100.Write to nNINETAI2005100.Write1D
at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n) at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n) at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n) at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n to System.Threading.ThreadHelper.ThreadStart (). TargetSite: {Void nNIMSSAIL100.StatusObserverT<><>
I am using VS2005 c# Please tell me what wroing Kind regards Alok dandois Hey Alok,.
This error code means that the revision of the map is more recent and not yet supported by the driver. That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx. Try upgrading to the latest version of DAQmx and try again.
While you're there. See if you can find the product ID located in Device Manager (if you are using Windows). Once in the Device Manager, right click on the device and click Properties. Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id". It should look something like PCI\VEN_xxxx & DEV_xxxx... Paste in a reply in this thread can I be sure of your problem. Germano- Tags: NI Hardware Communication error has occurred during the last request please check connection. I get this error, Communication error occurred during the last request please check connection. Request failed with the following error message:
--. You want to start the last request? Original title: Communication Error Message It seemed have lost ANY ability to network. I have aparantly been hit with some sort of trojan_downloader that killed my ability to use administrative tools, regedit, System Restore. Get other mistakes, too (the drivers are corupt, material of finds which is no longer on the machine, etc.). Got rid of the virus, but still cannot use the net. Any ideas on how to restore would be appreciated. Your computer is not really clean or the operating system was severely damaged by the infection. Make sure that the computer is free of viruses/malware, take a look at the removal steps listed in the following link. If you were this in-depth, go to the next thing. If you were not this thorough, go through the steps. http://www.elephantboycomputers.com/page2.html#Removing_Malware If the computer is really clean now, and you still have problems you have described, the best solution is to backup your data and do a clean install of Windows. I understand that this is not the answer to most people, but from my experience, it will be extremely difficult, if not impossible to establish such a system damaged. http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to Ok... Seriously I'm banging my head against the wall here. I'm using LabVIEW 2011 SP1. VideoMASTER 3.1! I have compiled mass screw on the 2011 folder. It does nothing good. 2 machines to put up with the same versions of LV and VMS. I use the VBF in Image file VI niVMS to convert .vbf files to jpg. I browse to folder of waveforms in the public domain for VideoMASTER and select the native C:\Users\Public\Documents\National Instruments\VideoMASTER\Waveforms\480p RGB OmniGen.vbf file. I then monostable it in the same folder as the jpg file. I get the following error: "Error 1 occurred in C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data. Possible reasons: LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. On computer A, I do NOT get this error (in fact, everything works fine for all files). On computer B, I get the error. Do the same for the vbf HDMI file in the folder of waveforms and it works very well. Do the same for the 480 p file, but a bmp file and no error, however the bmp file is corrupted with no data. I need to know what is happening in the bowels of this dll. Maybe I'm missing a codec on Machine B? It seems that I'm missing a dependency for this file type. If so how would I know which? VMS I reinstalled several times. I copied the dll over the Machine A. I checked is NOT a licensing problem. Any thoughts? Thank you Jigg, with some quick research, it seems that the accident that you see can be related to do not call the niVMS function initialize before VBF to picture file feature. Please try to run each of the screws after the launch of LabVIEW 2011 and see if you get the same results, and also adding the Initialize works in your code solves the problem. If so, it seems that it will be your workaround solution, but we will also file a bug report; crash is not an expected way to treat this condition. Edit: Also, if you have other versions of LabVIEW, 2012, etc., which you can compare run this code, we would be interested in the results. Thank you "An internal system error has occurred" when you try to install DirectX. A week or so, I tried to install a game requiring the use of DirectX. Well when I go to install DirectX, it gives me an error that reads, 'an internal system error has occurred. " "Please refer to DXError.log andDirectX.log in your Windows folder to determine the problem." I can't find the files mentioned above on my computer, so therefore, I can't see them. Here's my DXDIAG: ------------------ Information System ------------------ Time of this report: 07/02/2011, 17:24:20 Computer name: ZACH-PC Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618 - 1621) Language: English (regional setting: English) Manufacturer: Acer System model: Aspire 5532 BIOS: Version InsydeH2O V1.08 Processor: AMD Athlon (TM) Processor TF-20, ~1.6GHz Memory: 3072 MB RAM Available OS memory: 2812MB RAM Page file: 1623MB used, 3998 MB of available space Windows Dir: C:\Windows DirectX version: DirectX 11 DX setup parameters: not found DPI setting: Using System DPI System DPI setting: 96 DPI (100%) DWM DPI Scaling: disabled DxDiag Version: 6.01.7600.16385 64 bit Unicode ------------ DxDiag Notes ------------ Display 1 tab: No problems found. Sound tab 1: No problems found. 2 Audio tab: No problems found. 3 Audio tab: No problems found. Input tab: no problems found. -------------------- DirectX Debug levels -------------------- Direct3D: 0/4 (detail) DirectDraw: 0/4 (detail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (detail) DirectSound: 0/5 (retail) DirectShow: 0/6 (detail) --------------- Display devices --------------- Card name: ATI Radeon HD 3200 graphics card Manufacturer: ATI Technologies Inc. Type of piece: ATI display adapter (0 x 9612) DAC type: DAC (400 MHz) internal The device key: Enum\PCI\VEN_1002 & DEV_9612 & SUBSYS_028D1025 & REV_00 Memory display: 1403 MB Dedicated memory: 253 MB Shared memory: 1150 MB Current mode: 1366 x 768 (32 bit) (60 Hz) Name of the monitor: generic PnP monitor Monitor model: unknown Monitor ID: AUO10EC Native mode: 1366 x 768 (p) (60,114 Hz) Output type: internal Driver name: atiumd64.dll, atidxx64.dll, atiumdag, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll The driver file version: 8.14.0010.0678 (English) Driver version: 8.634.0.0 DDI version: 10 : Model WDDM 1.1 driver Driver attributes: Final retail Driver Date/size: 2009-07-29 06:43:14, 4059648 bytes Would be WHQL logo: Yes Date stamp WHQL: The instrument identifier: {D7B71EE2-D552-11CF-3371-8722A1C2C535} Vendor ID: 0 x 1002 Device ID: 0 x 9612 SubSys ID: 0x028D1025 Revision ID: 0x0000 Strong name of the driver: oem7.inf:ATI. Mfg.NTamd64.6.1:ati2mtag_RS780M:8.634.0.0:pci\ven_1002&dev_9612&subsys_028d1025 The driver rating: 00E60001 Video Accel: ModeMPEG2_A ModeMPEG2_C Deinterlace caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) (YV12, 0 x 32315659) = Frames(Prev/Fwd/Back) = (0,0,0) Caps
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps D3d9 Overlay: Unsupported DXVA-HD: not supported DDraw status: enabled D3D status: enabled AGP status: enabled ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default audio playback: Yes Default voice playback: Yes Hardware ID: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0272 & SUBSYS_1025028D & REV_1000 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver name: RTKVHD64.sys Driver version: 6.00.0001.5904 (English) Driver attributes: Final retail Would be WHQL logo: Yes Date and size: 2009-07-28 08:00:14, 1966624 bytes Other files: Driver provider: Realtek Semiconductor Corp. HW Accel level: basic Cap flags: 0xF1F Min/Max sample rate: 100, 200000 Mix beef static/Strm HW: 1, 0 Static/Strm HW 3D steers: 0, 0 HW memory: 0 Management of the voice: No. Listen/Src/EAX (TM) 2.0: No, no Listen/Src/I3DL2 (TM): No, no Sensaura (TM) ZoomFX (tm): No. Description: Speakers (Avnex Virtual Audio Device) Default audio playback: No. Default voice playback: no Hardware ID: Manufacturer ID: 1 Product ID: 100 Type: WDM Driver name: {0.0.0.00000000}. {1f21753a-ec03-4b7e-b4b5-fc9a36a3aafd} Driver version:) Driver attributes: Final retail WHQL Logo would be: No. Date and size:, 0 bytes Other files: Driver provider: AVNEX Ltd. HW Accel level: basic Cap flags: 0xF1F Min/Max sample rate: 100, 200000 Mix beef static/Strm HW: 1, 0 Static/Strm HW 3D steers: 0, 0 HW memory: 0 Management of the voice: No. Listen/Src/EAX (TM) 2.0: No, no Listen/Src/I3DL2 (TM): No, no Sensaura (TM) ZoomFX (tm): No. Description: Speakers (USB-2 Audio device) Default audio playback: No. Default voice playback: no Hardware ID: USB\VID_0D8C & PID_0008 & REV_0100 & MI_00 Manufacturer ID: 65535 Product ID: 65535 Type: WDM Driver name: USBAUDIO.sys Driver version: 6.01.7600.16385 (in English) Driver attributes: Final retail Would be WHQL logo: Yes Date and size: 2009-07-13 19:06:32, 109568 bytes Other files: Driver provider: Microsoft HW Accel level: basic Cap flags: 0xF1F Min/Max sample rate: 100, 200000 Mix beef static/Strm HW: 1, 0 Static/Strm HW 3D steers: 0, 0 HW memory: 0 Management of the voice: No. Listen/Src/EAX (TM) 2.0: No, no Listen/Src/I3DL2 (TM): No, no Sensaura (TM) ZoomFX (tm): No. --------------------- Sound Capture devices --------------------- Description: Microphone (2 - USB Audio Device) Capture audio by default: Yes Default voice Capture: Yes Driver name: USBAUDIO.sys Driver version: 6.01.7600.16385 (in English) Driver attributes: Final retail Date and size: 2009-07-13 19:06:32, 109568 bytes Cap flags: 0x1 Format flags: 0xFFFFF Description: Microphone (Avnex Virtual Audio Device) Capture audio by default: No. Default voice Capture: No.
Driver name: {0.0.1.00000000}. {748162c7-28eb-437c-928f-6328b0338d58} Driver version:) Driver attributes: Final retail Date and size:, 0 bytes Cap flags: 0x1 Format flags: 0xFFFFF ------------------- DirectInput devices ------------------- Device name: mouse Joint: 1 Controller ID: n/a Vendor/product ID: n/a FF driver: n/a Device name: keyboard Joint: 1 Controller ID: n/a Vendor/product ID: n/a FF driver: n/a Device name: Razer gaming device Joint: 1 Controller ID: 0 x 0 Suppliers of products/ID: 0xBEEF, 0x0EED FF driver: n/a Device name: C-Media USB Audio Device Joint: 1 Controller ID: 0 x 0 Suppliers of products/ID: 0x0D8C, 0 x 0008 FF driver: n/a Poll w / Interrupt: No. ----------- USB devices ----------- + USB root hub | Suppliers of products/ID: 0 x 1002, 0 x 4397 | Matching Device ID: usb\root_hub | Service: usbhub | Driver: usbhub.sys, 13/07/2009 19:07:09, 343040 bytes | Driver: usbd.sys, 13/07/2009 19:06:23, 7936 bytes | + - + DeathAdder mouse | | Suppliers of products/ID: 1532 0 x, 0 x 0007
| | Location: Port_ #0001.Hub_ #0001 | | Matching device ID: usb\vid_1532 & pid_0007 | | Lower filters: DAdderFltr | | Service: HidUsb | | Driver: dadder.sys, 19/04/2010 17:04:44, 12032 bytes | | Driver: hidusb.sys, 13/07/2009 19:06:22, 30 208 bytes | | Driver: hidclass.sys, 13/07/2009 19:06:21, 76288 bytes | | Driver: hidparse.sys, 13/07/2009 19:06:17, 32896 bytes | | | + - + HID-compliant mouse | | | Suppliers of products/ID: 1532 0 x, 0 x 0007 | | | Matching Device ID: hid_device_system_mouse | | | Service: me | | | Driver: mouhid.sys, 2009-07-13 19:00:20, 31232 bytes | | | Driver: mouclass.sys, 2009-07-13 20:48:27, 49216 bytes ---------------- Gameport devices ---------------- ------------ PS/2 devices ------------ + Launch Manager | Matching Device ID: * pnp0303 | High filters: DKbFltr | Service: i8042prt | Driver: C:\windows\system32\drivers\dkbfltr.sys, 2009-03-25 22:16:08, 25608 bytes | Driver: i8042prt.sys, 13/07/2009 18:19:57, 105472 bytes | Driver: kbdclass.sys, 2009-07-13 20:48:04, 50768 bytes | + Keyboard HID device | Matching Device ID: hid_device_system_keyboard | Service: kbdhid | Driver: kbdhid.sys, 2009-07-13 19:00:20, 33280 bytes | Driver: kbdclass.sys, 2009-07-13 20:48:04, 50768 bytes | + Server terminal keyboard driver | Matching Device ID: root\rdp_kbd | High filters: kbdclass | Service: TermDD | Driver: i8042prt.sys, 13/07/2009 18:19:57, 105472 bytes | Driver: kbdclass.sys, 2009-07-13 20:48:04, 50768 bytes | + Synaptics PS/2 Port TouchPad | Matching Device ID: * syn1b1d | High filters: SynTP | Service: i8042prt | Pilot: SynTP.sys, 18/06/2009 07:12:32, 272432 bytes | Driver: C:\windows\system32\syntpapi.dll, 2009-06-18 07:10:42, 203560 bytes | Driver: C:\windows\system32\syncom.dll, 2009-06-18 07:10:36, 395048 bytes | Pilot: SynCtrl.dll, 18/06/2009 07:10:38, 260904 bytes | Driver: SynTPRes.dll, 2009-06-18 07:10:46, 8054568 bytes | Driver: SynTPCpl.dll, 2009-06-18 07:10:46, 1525032 bytes | Driver: SynCntxt.rtf, 2009-06-18 07:02:14, 7118958 bytes | Driver: SynZMetr.exe, 2009-06-18 07:10:34, 247080 bytes | Driver: SynMood.exe, 2009-06-18 07:10:32, 238888 bytes | Pilot: SynTPEnh.exe, 18/06/2009 07:10:32, 1808168 bytes | Pilot: SynTPCOM.dll, 18/06/2009 07:10:44, 120104 bytes | Pilot: Tutorial.exe, 18/06/2009 07:10:36, 337192 bytes | Pilot: InstNT.exe, 18/06/2009 07:10:28, 149800 bytes | Pilot: SynISDLL.dll, 18/06/2009 07:10:40, 197928 bytes | Driver: SynUnst.ini, 2009-06-25 20:39:44, 620786 bytes | Driver: SynChiralRotate.mpg, 2008-09-17 00:13:08, 382277 bytes | Driver: SynFlick.mpg, 02/09/2008 22:27:28, 737975 bytes | Driver: SynPinch.mpg, 02/09/2008 22:27:28, 286463 bytes | Driver: SynMomentum.mpg, 02/09/2008 22:27:28, 246230 bytes | Driver: SynLinearVHScroll.mpg, 02/09/2008 22:27:28, 929103 bytes | Driver: SynChiralVHScroll.mpg, 02/09/2008 22:27:28, 1620778 bytes
| Driver: SynTwoFingerVHScroll.mpg, 2009-03-15 20:44, 746464 bytes | Driver: SynPivotRotate_ChiralRotate.mpg, 04-09-2009 04:04:14, 1142810 bytes | Driver: SynThreeFingerFlick.mpg, 2009-03-15 20:44, 633621 bytes | Driver: SynThreeFingersDown.mpg, 2009-03-15 20:44, 215907 bytes | Pilot: SynTPHelper.exe, 18/06/2009 07:10:32, 120616 bytes | Driver: fx04.wav, 08/05/2007 20:48:26, 16898 bytes | Driver: SynAcer.exe, 2009-06-18 07:10:48, 160552 bytes | Driver: SynAcerCpl.cpl, 2009-06-18 06:38:40, 323072 bytes | Driver: SynTwoFingerVScroll.mpg, 2009-03-15 20:44, 501787 bytes | Driver: SynFlickLR.mpg, 02/09/2008 22:27:28, 495798 bytes | Driver: C:\windows\system32\syncom.dll, 2009-06-18 07:10:36, 169256 bytes | Pilot: SynCtrl.dll, 18/06/2009 07:10:38, 206120 bytes | Pilot: SynTPCOM.dll, 18/06/2009 07:10:44, 107816 bytes | Driver: i8042prt.sys, 13/07/2009 18:19:57, 105472 bytes | Driver: mouclass.sys, 2009-07-13 20:48:27, 49216 bytes | Driver: SynTPCo4.dll, 2009-06-18 07:10:42, 147752 bytes | Driver: WdfCoInstaller01009.dll, 2009-05-20 20:43:50, 1436920 bytes | + HID-compliant mouse | Matching Device ID: hid_device_system_mouse | Service: me | Driver: mouhid.sys, 2009-07-13 19:00:20, 31232 bytes | Driver: mouclass.sys, 2009-07-13 20:48:27, 49216 bytes | + Terminal Server mouse driver | Matching Device ID: root\rdp_mou | High filters: mouclass | Service: TermDD | Driver: termdd.sys, 13/07/2009 20:45:55, 62544 bytes | Driver: sermouse.sys, 2009-07-13 19:00:20, 26624 bytes | Driver: mouclass.sys, 2009-07-13 20:48:27, 49216 bytes ------------------------ Disk & CD-ROM/DVD-ROM readers
------------------------ Drive: C: Free space: 31.2 GB Total space: 140.2 GB File system: NTFS Model: WDC WD1600BEVT-22ZCT0 ATA Device Drive: D: Model: TSSTcorp CDDVDW TS-L633C ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (in English), 13/07/2009-18:19:54, 147456 bytes -------------- System devices -------------- Name: Bridge PCI to PCI standard PCI Device ID: PCI\VEN_1022 & DEV_9602 & SUBSYS_96021022 & REV_00\3 & 2411E6FE & 1 & 08 Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.01.7600.16385 (in English), 2009-07-13 20:45:45, 183872 bytes Name: OpenHCD Standard USB host controller Device ID: PCI\VEN_1002 & DEV_4398 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 91 Pilot: C:\Windows\system32\drivers\usbohci.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:30, 25600 bytes Driver: C:\Windows\system32\drivers\usbport.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:31, 324608 bytes Driver: C:\Windows\system32\drivers\usbhub.sys, 6.01.7600.16385 (in English), 2009-07-13 19:07:09, 343040 bytes Name: The standard host PCI bridge CPU Device ID: PCI\VEN_1022 & DEV_9600 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 00 Pilot: s/o Name: OpenHCD Standard USB host controller Device ID: PCI\VEN_1002 & DEV_4397 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 90 Pilot: C:\Windows\system32\drivers\usbohci.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:30, 25600 bytes Driver: C:\Windows\system32\drivers\usbport.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:31, 324608 bytes Driver: C:\Windows\system32\drivers\usbhub.sys, 6.01.7600.16385 (in English), 2009-07-13 19:07:09, 343040 bytes Name: AMD Setup various Device ID: PCI\VEN_1022 & DEV_1103 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C3 Pilot: s/o Name: Standard enhanced PCI to USB Host Controller Device ID: PCI\VEN_1002 & DEV_4396 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 92 Driver: C:\Windows\system32\drivers\usbehci.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:30, 51200 bytes Driver: C:\Windows\system32\drivers\usbport.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:31, 324608 bytes Driver: C:\Windows\system32\drivers\usbhub.sys, 6.01.7600.16385 (in English), 2009-07-13 19:07:09, 343040 bytes Name: Configuration of the HyperTransport (MC) and DRAM AMD tracking Mode Device ID: PCI\VEN_1022 & DEV_1102 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 C2 Pilot: s/o Name: Controller Serial ATA Standard AHCI 1.0 Device ID: PCI\VEN_1002 & DEV_4391 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 88
Driver: C:\Windows\system32\DRIVERS\msahci.sys, 6.01.7600.16385 (in English), 2009-07-13 20:48:27, 30272 bytes Driver: C:\Windows\system32\DRIVERS\pciidex.sys, 6.01.7600.16385 (in English), 2009-07-13 20:45:46, 48720 bytes Driver: C:\Windows\system32\DRIVERS\atapi.sys, 6.01.7600.16385 (in English), 2009-07-13 20:52:21, 24128 bytes Driver: C:\Windows\system32\DRIVERS\ataport.sys, 6.01.7600.16385 (in English), 2009-07-13 20:52:21, 155728 bytes Name: Atheros AR8132 PCI-E Fast Ethernet (NDIS 6.20) controller Device ID: PCI\VEN_1969 & DEV_1062 & SUBSYS_028D1025 & REV_C0\4 & 7A7D559 & 0 & 0028 Driver: C:\Windows\system32\DRIVERS\L1C62x64.sys, 1.00.0000.0010 (English), 27/07/2009 02:04:36, 58880 bytes Name: AMD Configuration map address Device ID: PCI\VEN_1022 & DEV_1101 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C1 Pilot: s/o Name: ATI i/o Communications Processor SMBus Controller Device ID: PCI\VEN_1002 & DEV_4385 & SUBSYS_028D1025 & REV_3C\3 & 2411E6FE & 1 & A0 Pilot: s/o Name: Atheros AR5B93 Wireless Network adapt Device ID: PCI\VEN_168C & DEV_002A & SUBSYS_E01F105B & REV_01\4 & 137E0A89 & 0 & 0020 Driver: C:\Windows\system32\DRIVERS\athrx.sys, 8.00.0000.0177 (English), 07-16-2009 06:33:44, 1488384 bytes Driver: C:\Windows\system32\drivers\vwifibus.sys, 6.01.7600.16385 (in English), 2009-07-13 19:07:21, 24576 bytes Name: AMD HyperTransport (MC) Configuration Device ID: PCI\VEN_1022 & DEV_1100 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & C0 Pilot: s/o Name: ATI i/o Communications Processor PCI Bus controller Device ID: PCI\VEN_1002 & DEV_4384 & SUBSYS_00000000 & REV_00\3 & 2411E6FE & 1 & A4 Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.01.7600.16385 (in English), 2009-07-13 20:45:45, 183872 bytes Name: Bridge PCI to PCI standard PCI Device ID: PCI\VEN_1022 & DEV_9605 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 28 Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.01.7600.16385 (in English), 2009-07-13 20:45:45, 183872 bytes Name: Card ATI Radeon HD 3200 graphics Device ID: PCI\VEN_1002 & DEV_9612 & SUBSYS_028D1025 & REV_00\4 & F4E2B40 & 0 & 2808 Driver: C:\Windows\system32\DRIVERS\atikmdag.sys, 8.01.0001.0921 (English), 2009-07-29 17:11:24, 6038016 bytes
Driver: C:\Windows\system32\DRIVERS\ati2erec.dll, 1.00.0000.0019 (English), 29/07/2009 06:06:42, 53248 bytes Driver: C:\Windows\system32\atiumd64.dll, 8.14.0010.0678 (English), 29/07/2009 06:43:14, 4059648 bytes Driver: C:\Windows\system32\atiumd6a.dll, 8.14.0010.0228 (English), 29/07/2009 06:38:10, 2622976 bytes Driver: C:\Windows\system32\atitmm64.dll, 6.14.0011.0022 (English), 29/07/2009 07:02:32, 120320 bytes Driver: C:\Windows\system32\atiicdxx.dat, 2009-06-17 23:29:04, 197654 bytes Driver: C:\Windows\system32\amdpcom64.dll, 8.14.0010.0023 (English), 29/07/2009 06:21:12, 52224 bytes Driver: C:\Windows\system32\atimpc64.dll, 8.14.0010.0023 (English), 29/07/2009 06:21:12, 52224 bytes Driver: C:\Windows\system32\atiadlxx.dll, 6.14.0010.1050 (English), 29/07/2009 06:20:42, 251904 bytes Driver: C:\Windows\system32\atiumd6a.cap, 2009-07-29 06:35:56, 219120 bytes Driver: C:\Windows\system32\atimuixx.dll, 6.14.0010.1001 (English), 29/07/2009 07:01:46, 12288 bytes Driver: C:\Windows\system32\atiesrxx.exe, 6.14.0011.1033 (English), 29/07/2009 07:03:42, 203264 bytes Driver: C:\Windows\system32\atieclxx.exe, 6.14.0011.1033 (English), 29/07/2009 07:04:14, 420352 bytes Driver: C:\Windows\system32\atipdl64.dll, 6.14.0010.2556 (English), 29/07/2009 07:02:14, 421376 bytes Driver: C:\Windows\system32\atiedu64.dll, 6.14.0010.2514 (English), 29/07/2009-07:01:42, 59392 bytes Driver: C:\Windows\system32\ATIDEMGX.dll, 2.00.3497.39731 (English), 29/07/2009 07:04:22, 442368 bytes Driver: C:\Windows\system32\atio6axx.dll, 6.14.0010.8794 (English), 29/07/2009 07:00:22, 15072768 bytes Driver: C:\Windows\system32\atibtmon.exe, 2.00.0000.0000 (English), 11/05/2009 01:35:30, 118784 bytes Driver: C:\Windows\system32\atidxx64.dll, 8.15.0010.0212 (English), 29/07/2009-06:53:38, 2921984 bytes Driver: C:\Windows\SysWOW64\atiumdag.dll, 8.14.0010.0678 (English), 29/07/2009 06:47:52, 3105280 bytes Driver: C:\Windows\SysWOW64\atiumdva.dll, 8.14.0010.0228 (English), 29/07/2009 06:32:54, 2868736 bytes Driver: C:\Windows\SysWOW64\amdpcom32.dll, 8.14.0010.0023 (English), 29/07/2009 06:21:06, 51712 bytes
Driver: C:\Windows\SysWOW64\atimpc32.dll, 8.14.0010.0023 (English), 29/07/2009 06:21:06, 51712 bytes Driver: C:\Windows\SysWOW64\atiadlxy.dll, 6.14.0010.1050 (English), 29/07/2009-06:20:36, 184320 bytes Driver: C:\Windows\SysWOW64\atiumdva.cap, 29/07/2009 06:32:32, 219120 bytes Driver: C:\Windows\SysWOW64\atipdlxx.dll, 6.14.0010.2556 (English), 29/07/2009-07:02:06, 356352 bytes Driver: C:\Windows\SysWOW64\ati2edxx.dll, 6.14.0010.2514 (English), 29/07/2009-07:01:36, 43520 bytes Driver: C:\Windows\SysWOW64\atioglxx.dll, 6.14.0010.8794 (English), 29/07/2009 06:38:52, 11660800 bytes Driver: C:\Windows\SysWOW64\atidxx32.dll, 8.15.0010.0212 (English), 29/07/2009 06:58:52, 2469888 bytes Driver: C:\Windows\atiogl.xml, 13/07/2009 12:26:06, 18335 bytes Name: High Definition Audio Controller Device ID: PCI\VEN_1002 & DEV_4383 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & A2 Driver: C:\Windows\system32\DRIVERS\hdaudbus.sys, 6.01.7600.16385 (in English), 2009-07-13 19:06:13, 122368 bytes Name: Bridge PCI to PCI standard PCI Device ID: PCI\VEN_1022 & DEV_9604 & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & 20 Driver: C:\Windows\system32\DRIVERS\pci.sys, 6.01.7600.16385 (in English), 2009-07-13 20:45:45, 183872 bytes Name: PCI standard ISA bridge Device ID: PCI\VEN_1002 & DEV_439D & SUBSYS_028D1025 & REV_00\3 & 2411E6FE & 1 & A3 Driver: C:\Windows\system32\DRIVERS\msisadrv.sys, 6.01.7600.16385 (in English), 2009-07-13 20:48:27, 15424 bytes ------------------ DirectShow filters ------------------ DirectShow filters: WMAudio Decoder DMO, 0 x 00800800, 1, 1, WMADMOD. DLL, 6.01.7600.16385 WMAPro over S/PDIF DMO, 0 x 00600800, 1, 1, WMADMOD. DLL, 6.01.7600.16385 WMSpeech Decoder DMO, 0 x 00600800, 1, 1, WMSPDMOD. DLL, 6.01.7600.16385 MP3 DMO, 0 x 00600800, 1, 1, mp3dmod.dll, 6.01.7600.16385 decoder Mpeg4s decoder DMO, 0 x 00800001, 1, 1, mp4sdecd.dll, 6.01.7600.16385 Decoder WMV DMO, 0 x 00600800, 1 screen, 1, wmvsdecd.dll, 6.01.7600.16385 Decoder DMO WMVideo, 0 x 00800001, 1, 1, wmvdecod.dll, 6.01.7600.16597 Mpeg43 decoder DMO, 0 x 00800001, 1, 1, mp43decd.dll, 6.01.7600.16385 MPEG4 Decoder DMO, 0 x 00800001, 1, 1, mpg4decd.dll, 6.01.7600.16385 DV Muxer, 0x00400000, 0, 0, qdv.dll, 6.06.7600.16385 Converter, 0 x 00400001, 1, 1, quartz.dll, 6.06.7600.16490 color space Reader, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7600.16385 Filter, 0 x 00200000, 0, 1, wmpsrcwp.dll, 12.00.7600.16385 screenshot AVI Splitter, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16490 VGA 16 color Ditherer, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16490 SBE2MediaTypeProfile, 0 x 00200000, 0, 0, SBE.dll, 6.06.7600.16385
Microsoft DTV - DVD video Decoder, 0x005fffff, 2, 4, msmpeg2vdec.dll, 6.01.7140.0000 AC3 parser Filter, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7600.16648 StreamBufferSink, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385 Microsoft TV legends Decoder, 0 x 00200001, 1, 0, MSTVCapn.dll, 6.01.7600.16385 MJPEG Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16490 CBVA DMO wrapper filter, 0 x 00200000, 1, 1, cbva.dll, 6.01.7600.16385 MPEG-I Stream Splitter, 0 x 00600000, 1, 2, quartz.dll, 6.06.7600.16490 Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16490 SAMI (CC) The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7600.16385 MPEG-2 Splitter, 0x005fffff, 1, 0, mpg2splt.ax, 6.06.7600.16648 Filter, 0 x 00200000, 2, 5, cca.dll, 6.06.7600.16385 analysis of closed captioning SBE2FileScan, 0 x 00200000, 0, 0, SBE.dll, 6.06.7600.16385 Microsoft MPEG-2 video encoding, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7600.16385 Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7600.16490 Script command internal MPEG Audio Decoder, 0 x 03680001, 1, 1, quartz.dll, 6.06.7600.16490 DV Splitter, 0 x 00600000, 1, 2, qdv.dll, 6.06.7600.16385 Video Mixing Renderer 9 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 Microsoft MPEG - 2 encode, 0 x 00200000, 2, 1, msmpeg2enc.dll, 6.01.7600.16385 ACM Wrapper, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16490 Video Renderer, 0 x 00800001, 1, 0, quartz.dll, 6.06.7600.16490 Video stream MPEG - 2 Analyzer, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385 Line 21 decoder, 0 00600000, 1, 1, x Port video Manager, 0 x 00600000, 2, 1, quartz.dll, 6.06.7600.16490 Video Renderer, 0x00400000, 1, 0, quartz.dll, 6.06.7600.16490 Decoder, 0 x 00200000 VPS, 0, 0, WSTPager.ax, 6.06.7600.16385 Writer, 0x00400000, 0, 0, qasf.dll, WM ASF 12.00.7600.16385 Allocator, 0 x 00600000, 1, 1, vbisurf.ax, 6.01.7600.16385 Surface of VBI File writer, 00200000 x 0, 1, 0, qcap.dll, 6.06.7600.16385 iTV Sink, 0 x 00600000, 1, 0, itvdata.dll, 6.06.7600.16385 data
iTV to Capture data filter 0 x 00600000, 1, 1, itvdata.dll, 6.06.7600.16385 DVD Navigator, 0 x 00200000, 0, 3, qdvd.dll, 6.06.7600.16385 Microsoft TV subtitles Decoder, 0 x 00200001, 1, 0, MSTVCapn.dll, 6.01.7600.16385 Mixer2, 0 x 00200000, 1, 1, overlay RDP DShow Redirection Filter, 0xffffffff, 1, 0, DShowRdpFilter.dll, Microsoft MPEG-2 Audio Encoder, 0 x 00200000, 1, 1, msmpeg2enc.dll, 6.01.7600.16385 Pager, 0 x 00200000, 1, 1, WSTPager.ax, 6.06.7600.16385 WST MPEG2 demux, 0 x 00600000, 1, 1, mpg2splt.ax, 6.06.7600.16648 Decoder, 0 x 00800000, 1, 1, qdv.dll, 6.06.7600.16385 DV video SampleGrabber, 0 x 00200000, 1, 1, qedit.dll, 6.06.7600.16385 Renderer, 00200000 x 0, 1, 0, qedit.dll, 6.06.7600.16385 null Tables, 0x005fffff, 1, 0, mpeg2data.ax, 6.06.7600.16385 and MPEG - 2 Sections Microsoft AC3 Encoder, 0 x 00200000, 1, 1, msac3enc.dll, 6.01.7600.16385 StreamBufferSource, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385 Smart Tee, 0 x 00200000, 1, 2, qcap.dll, 6.06.7600.16385 Overlay mixer, 0 x 00200000, 0, 0, AVI Decompressor, 0 x 00600000, 1, 1, quartz.dll, 6.06.7600.16490 NetBridge, 00200000 x 0, 2, 0, netbridge.dll, 6.01.7600.16385 Source, 0 x 00400000, 0, 2, quartz.dll, 6.06.7600.16490 AVI/WAV file Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16490 wave Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16490 noon Multi-fichier Parser, 0 x 00400000, 1, 1, quartz.dll, 6.06.7600.16490 File stream renderer, 0x00400000, 1, 1, quartz.dll, 6.06.7600.16490 Microsoft DTV - DVD Audio Decoder, 0x005fffff, 1, 1, msmpeg2adec.dll, 6.01.7140.0000 StreamBufferSink2, 0 x 00200000, 0, 0, sbe.dll, 6.06.7600.16385 AVI Mux, 00200000 x 0, 1, 0, qcap.dll, 6.06.7600.16385 Line 21 decoder 2, 0 x 00600002, 1, 1, quartz.dll, 6.06.7600.16490 File Source (Async.), 0 x 00400000, 0, 1, quartz.dll, 6.06.7600.16490 File Source (URL), 0 x 00400000, 0, 1, quartz.dll, 6.06.7600.16490 Media Center Extender encryption Filter, 0 x 00200000, 2, 2, Mcx2Filter.dll, 6.01.7600.16385 Dest, 0 x 00200000, 0, 0, WavDest.dll AudioRecorder WAV,. Wave WavDest.dll AudioRecorder form, 0 x 00200000, 0, 0,., SoundRecorder Null Renderer, 0 x 00200000, 0, 0, WavDest.dll, Infinite pin Tee Filter, 0 x 00200000, 1, 1, qcap.dll, 6.06.7600.16385 Renderer, 00200000 x 0, 1, 0, evr.dll, 6.01.7600.16385 improved video BDA MPEG2 Transport Information Filter, 0 x 00200000, 2, 0, psisrndr.ax, 6.06.7600.16385 Decoder, 0 x 40000001, 1, 1, quartz.dll, 6.06.7600.16490 MPEG video WDM Streaming Tee/Splitter devices: Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385 tee/sink - to the-wells Video compressors: WMVideo8 encoder DMO, 0 x 00600800, 1, 1, wmvxencd.dll, 6.01.7600.16385 WMVideo9 encoder DMO, 0 x 00600800, 1, 1, wmvencod.dll, 6.01.7600.16385 Encoder 9 MSScreen DMO, 0 x 00600800, 1, 1, wmvsencd.dll, 6.01.7600.16385 Encode, 0 x 00200000, 0, 0, qdv.dll, 6.06.7600.16385 DV video MJPEG Compressor, 0 x 00200000, 0, 0, quartz.dll, 6.06.7600.16490 Audio compressors:
WM Encoder DMO speech, 0 00600800, 1, 1, x WMSPDMOE. DLL, 6.01.7600.16385 WMAudio encoder DMO, 0 x 00600800, 1, 1, WMADMOE. DLL, 6.01.7600.16385 IMA ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 PCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 Microsoft ADPCM, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 GSM 6.10, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 CCITT A - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 CCITT u - Law, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 MPEG Layer-3, 0 x 00200000, 1, 1, quartz.dll, 6.06.7600.16490 Audio Capture sources: Microphone (2 - USB Audio Device, 0 x 00200000, 0, 0, qcap.dll, 6.06.7600.16385) Microphone (Avnex Virtual Audio, 0 x 00200000, 0, 0, qcap.dll, 6.06.7600.16385) PBDA CP filters: PBDA DTFilter, 0 x 00600000, 1, 1, CPFilters.dll, 6.06.7600.16648 ETFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7600.16648 PTFilter, 0 x 00200000 PBDA, 0, 0, CPFilters.dll, 6.06.7600.16648 Midi converters: Default MidiOut Device, 0 x 00800000, 1, 0, quartz.dll, 6.06.7600.16490 Synth, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16490 Microsoft GS Wavetable WDM Streaming Capture devices: 0 x 00000000, 0, 0, 0 x 00000000, 0, 0, AVnex Virtual Audio Device, 0 x 00200000, 2, 2, ksproxy.ax, 6.01.7600.16385 Device, 0 x 00200000, 2, 2, ksproxy.ax, 6.01.7600.16385 Audio USB WDM Streaming making devices: Realtek HD Audio output, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385 AVnex Virtual Audio Device, 0 x 00200000, 2, 2, ksproxy.ax, 6.01.7600.16385 Device, 0 x 00200000, 2, 2, ksproxy.ax, 6.01.7600.16385 Audio USB BDA network providers: Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385 Microsoft ATSC network DVBC Microsoft Network Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385
Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, network 6.06.7600.16385 Microsoft DVBS Provider, 0 x 00200000, 0, 1, MSDvbNP.ax, 6.06.7600.16385 network Microsoft t Microsoft Network Provider, 0 x 00200000, 0, 1, MSNP.ax, 6.06.7600.16648 Multiple instances Codecs VBI Capable: The IST Codec, 0 x 00600000, 1, 4, VBICodec.ax, 6.06.7600.16385 BDA Transport Information converters: BDA MPEG2 Transport Information Filter 0 x 00600000, 2, 0, psisrndr.ax, 6.06.7600.16385 Tables, 0 x 00600000, 1, 0, mpeg2data.ax, 6.06.7600.16385 and MPEG - 2 Sections CP/CA BDA filters: Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7600.16385 Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7600.16385 PTFilter, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7600.16385 XDS Codec, 0 x 00200000, 0, 0, EncDec.dll, 6.06.7600.16385 WDM Streaming transformations of the Communication: Converter, 0 x 00200000, 1, 1, ksproxy.ax, 6.01.7600.16385 tee/sink - to the-wells Audio converters: Speakers (Realtek High Definiti, 00200000 x 0, 1, 0, quartz.dll, 6.06.7600.16490) DirectSound Device, 0 x 00800000, 1, 0, quartz.dll, default 6.06.7600.16490 Default WaveOut Device, 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 DirectSound: Speakers (2 - USB Audio Device), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 DirectSound: Speakers (Avnex Virtual Audio Device), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 DirectSound: Speakers (Realtek High definition Audio), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 Speakers (2 - USB Audio Device), 0 x 00200000, 1, 0, quartz.dll, 6.06.7600.16490 Speakers (Virtual Audio D, 0 x 00200000 Avnex, 1, 0, quartz.dll, 6.06.7600.16490) --------------- EVR power information --------------- Current value: {651288E5-A7ED-4076-A96B-6CC62D848FE1} (balanced) Quality indicators: 2576 Activated: Limitation of the force That allow half deinterlace Allow the scaling Decode power usage: 100 Balanced flags: 1424 Activated: Limitation of the force Allow batch processing Force half deinterlace Force the scaling Decode power usage: 50 PowerFlags: 1424 Activated: Limitation of the force Allow batch processing Force half deinterlace Force the scaling Decode power usage: 0 I asked a friend to real for my friends to come take a look at what was going on & he was able to remedy. My DirectX running smoothly now. Thank you all for all the help, if. I just want to play a game that requires the directx version, but I can't install it successfully. These are the logs DXerror -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_xinput_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_XACT_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Oct2006_XACT_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse E:\NEWFOL~1\Dec2006_d3dx10_00_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Apr2007_d3dx9_33_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX981.tmp. --------------------
Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX981.tmp\infinst.exe that is locked, reason = 5. --------------------
Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Jun2007_d3dx10_34_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DXAB8B.tmp. -------------------- Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DXAB8B.tmp\infinst.exe that is locked, reason = 5. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\PROGRA~2\ACTIVI~1\CALLOF~1\Redist\DirectX\Aug2007_d3dx10_35_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse E:\NEWFOL~1\Nov2007_d3dx10_36_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX64DA.tmp. -------------------- Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX64DA.tmp\infinst.exe that is locked, reason = 5. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Mar2008_d3dx10_37_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Cannot delete C:\Users\SHOBHIN\AppData\Local\Temp\DX1FE0.tmp. --------------------
Cannot delete: C:\Users\SHOBHIN\AppData\Local\Temp\DX1FE0.tmp\infinst.exe that is locked, reason = 5. -------------------- Has no API: SetupIterateCabinet()
Impossible to browse C:\Windows\system32\DirectX\WebSetup\Nov2007_X3DAudio_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. I am also having this problem. I built a new PC and installed Farcry 4 on a cleaning/charge of windows installation. He has not previously installed directx. Installing Farcry 4 mentioned that he was installing directx, however it was very short and im not sure if that actually worked. Anyway, when you try to run the game I got an error on D3DCompiler.DLL having disappeared. Research it's turned out to be a directx error. All attempts to update directx (in administrator mode) both using the web Setup program, download files locally, on the album, every single method directx Setup fails with the return to "internal an error" has occurred and to return to the running log file. mine is similar to the above, and it seems that (even when you use the web installer) log file looking for the CD, however, the issue appears to lie with this being "mapped using session" open, please refer to the newspaper below. Please help us? Thank you -------------------- Has no API: SetupIterateCabinet() Impossible to browse R:\Support\Software\DirectX\Apr2005_d3dx9_25_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Jun2005_d3dx9_26_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2005_d3dx9_27_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. --------------------
InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Users\Mike\Contacts\Dec2005_d3dx9_28_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. --------------------
Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Feb2006_d3dx9_29_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Feb2006_XACT_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse R:\Support\Software\DirectX\Aug2006_xinput_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. -------------------- Has no API: SetupIterateCabinet() Impossible to browse C:\Windows\system32\DirectX\WebSetup\Aug2006_XACT_x64.cab. The file is possibly corrupted. -------------------- DirectXUpdateInstallPlugIn() failed. -------------------- InstallPlugIn() failed. An internal build error has occurred. Check the error log. ? I was getting this error because I had one this line of code
in any case... my bad... If the compiler sees something really wrong with your code he goes into panic mode and doesn't show you any errors... :) Gotta make sure that your code is valid... an error has occurred in the script on this page. expected tank 21079 error code line 2 0 Hello Thanks for the post. I understand that you meet the on Internet Explorer script error. I suggest you check out the link and follow the steps. How to troubleshoot script errors in Internet Explorer http://support.Microsoft.com/kb/308260 Hope it will be useful. Original title: DirectX will not install. I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again. Hello TheAwesomeJoey, Click on item below and follow the instructions to install DirectX.
This will check for any violation of the integrity and repair any damaged operating system files. Reboot your system. Marilyn Installation of DirectX installation error "an internal system error has occurred." an internal system error has occurred. Please see DXError.log and directX.log in your windows folder to determine the problem.
I had Directx 10 or 11 before, and I ran DirectX Rollback wizard, hope it would completely uninstall, but it didn't. Where are the files located in Directx? or where they could be located... Also, I think this could be fixed if I downloaded a version I install Directx9 manually. DXerror.log: -------------------- Has no API: RegOpenKeyEx() Course DirectX can be a version more old that does not have directx key in the registry. -------------------- GetDXVersion() failed. -------------------- DirectXUpdateDownloadPlugIn() failed. -------------------- DownloadPlugIn() failed. -------------------- Has no API: RegOpenKeyEx() Course DirectX can be a version more old that does not have directx key in the registry. -------------------- GetDXVersion() failed. -------------------- DirectXUpdateDownloadPlugIn() failed. -------------------- DownloadPlugIn() failed. -------------------- Has no API: RegOpenKeyEx() Course DirectX can be a version more old that does not have directx key in the registry. -------------------- GetDXVersion() failed. -------------------- DirectXUpdateDownloadPlugIn() failed. -------------------- DownloadPlugIn() failed. -------------------- Has no API: RegOpenKeyEx() Course DirectX can be a version more old that does not have directx key in the registry. -------------------- GetDXVersion() failed. -------------------- DirectXUpdateDownloadPlugIn() failed. -------------------- DownloadPlugIn() failed. You will need to reinstall your Windows operating system in order to revert to the original version of DirectX. Carey Frisch When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight. Hello Tjohanne This problem can occur because of a bad sector at the end of the volume that you are trying to save. However, as a workaround, you can try the following methods: (A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D. Run (B). disk check to check the hard drive C: Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored. C. now use another backup tool to check if you can back up files on the computer correctly. It may be useful Hello After looking on any 3rd party retailers appear Anytime Upgrade key for 7 to professional. When I try Anytime Upgrade system that is integrated and use 'go online to choose Windows7 edition which is best', an error box comes in reading "an error has occurred in the script on this page. Line 0. Char from 0. Script error. code 0. "with a URL. When I try the store I find nothing either. Can I deduce that Microsoft no longer sell upgrades between versions of windows 7? Whenever upgrades have long past gone Finally unless you are interested in win-10 which is. Many win-7 pro autour on Newegg and Amazon, but they are not at level only oem / system integrator. You could buy one and a new ssd / HDD to install on and use the original win-7 to move to 10 - win Then passed to win-10 pro for 99.us. An internal build error has occurred. Click for more information. An internal build error has occurred. Click for more information. You have a question? An internal build error has occurred. Please check the error log. After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem. Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back. http://tech.groups.Yahoo.com/group/flexcoders/message/69312 http://tech.groups.Yahoo.com/group/flexcoders/message/68604 http://tech.groups.Yahoo.com/group/flexcoders/message/62112 http://tech.groups.Yahoo.com/group/flexcoders/message/61840 http://tech.groups.Yahoo.com/group/flexcoders/message/57573 I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it Hello Max,. Thanks for posting your query on Microsoft Community forum. I would be grateful if you can provide us with the following information to help us better understand the issue. 0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors. There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application. Try it out below mentioned steps and check if it helps. Method 1: Update or reinstall the Microsoft XML parser To download the latest XML parser, visit the following Microsoft Web site: http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx) Method 2: Replace corrupted files To resolve this issue, follow these steps: 2. after replacing the files, you must save the files. To save the files, follow these steps: 4 restart your computer. Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you. Thank you. Satellite 1800: Model who exactly should I have? I now have a second hand satellite 1800 in my possession, by the manual in PDF on this computer HARD disk laptop I know it's a series 1800, but I know nothing more... How can know which specific model I?I tried to download the drivers etc, but I don' Code 8007045 that appear when Windows Update fails to install important updates three strangers on my gateway pc I found the address for 3 assignments more computers that are taken into account on our LAN portal. They do not appear on my network adapter even if I set the parameters for sharing and detection. It does not show even the ones that are supposed to b IP has changed. PDM inaccessible. I have a PIX 615 6.3 running. I changed my IP addressing scheme and so changed my address on my PIX. I am now able to ping to the new private address, but I am unable to telnet or https access. I even tried a stealth port scan and all ports were clos * Original title: this page cannot be display the remote or unit does not accept the connection. (! found) My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web p
otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicStringotNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\notNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\notNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\notNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::arrayotNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicStringSimilar Questions
301 moved permanently
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!
=========================
NOR-488: command requires GPIB controller charge controller. »
[12/10/14 13:37:23] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 13:37:23] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 13:37:23] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12/10/14 13:41:58] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 13:41:58] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 13:41:58] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12/10/14 14:32:17] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 14:32:17] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 14:32:17] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX
[12/10/14 14:48:49] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 14:48:49] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 14:48:49] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12/10/14 15:08:05] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 15:08:05] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 15:08:05] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX
[12/10/14 15:08:06] module: dsetup32 (Jun 2 2010), file: dsinline.h, line: 302, function: DXRemoveFile
[12/10/14 15:08:06] module: dsetup32 (Jun 2 2010), file: inline.h, line: 220, function: CleanUpDirectory
[12/10/14 15:35:40] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 15:35:40] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 15:35:40] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12/10/14 15:35:41] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile
[12/10/14 15:35:41] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory
[12/10/14 15:37:57] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 15:37:57] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 15:37:57] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX
[12/10/14 15:47:22] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 15:47:22] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 15:47:22] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12/10/14 15:47:23] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile
[12/10/14 15:47:23] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory
[12-10-14 16:35:01] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12-10-14 16:35:02] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12-10-14 16:35:02] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[12-10-14 16:35:03] module: dsetup32 (Mar 30 2011), file: dsinline.h, line: 302, function: DXRemoveFile
[12-10-14 16:35:03] module: dsetup32 (Mar 30 2011), file: inline.h, line: 331, function: CleanUpDirectory
[12/10/14 17:17:01] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[12/10/14 17:17:01] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[12/10/14 17:17:01] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[26-11-14 23:12:05] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[26-11-14 23:12:05] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[26-11-14 23:12:05] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX
[26-11-14 23:56:30] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[26-11-14 23:56:30] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[26-11-14 23:56:30] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[27/11/14 00:12:34] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:12:34] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:12:34] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[27/11/14 00:15:01] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:15:01] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:15:01] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[27/11/14 00:15:52] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:15:52] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:15:52] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[27/11/14 00:25:57] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:25:57] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:25:57] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
[27/11/14 00:29:36] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 5725, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:29:36] module: dsetup32 (Jun 2 2010), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:29:36] module: dsetup32 (Jun 2 2010), file: setup.cpp, line: 1723, function: CSetup::SetupForDirectX
[27/11/14 00:30:52] module: dxupdate (Nov 19 2010), file: dxupdate.cpp, line: 5738, function: DirectXUpdateInstallPlugIn
Error: (1224) - the requested operation cannot be performed on a file with a user mapped section open.
[27/11/14 00:30:52] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn
[27/11/14 00:30:52] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX
var temp: XML =
I can't find these two newspapers anywhere, and I'm not 100% sure what to do.
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannow
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
[10/26/10 17:20:40] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 175, function: GetDXVersion
Error: (2) - the system cannot find the specified file.
[10/26/10 17:20:40] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 4515, function: DirectXUpdateDownloadPlugIn
[10/26/10 17:20:41] module: DXWSetup (Feb 4 2010), file: dxupdate.cpp, line: 386, function: DownloadPlugIn
[10/26/10 17:20:41] module: DXWSetup (Feb 4 2010), file: psheets.cpp, line: 498, function: PreinstDlgProc
[10/26/10 17:21:59] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 175, function: GetDXVersion
Error: (2) - the system cannot find the specified file.
[10/26/10 17:21:59] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 4515, function: DirectXUpdateDownloadPlugIn
[10/26/10 17:22] module: DXWSetup (Feb 4 2010), file: dxupdate.cpp, line: 386, function: DownloadPlugIn
[10/26/10 17:22] module: DXWSetup (Feb 4 2010), file: psheets.cpp, line: 498, function: PreinstDlgProc
[10/26/10 17:25:29] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 175, function: GetDXVersion
Error: (2) - the system cannot find the specified file.
[10/26/10 17:25:29] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 4515, function: DirectXUpdateDownloadPlugIn
[10/26/10 17:25:30] module: DXWSetup (Jun 2 2010), file: dxupdate.cpp, line: 386, function: DownloadPlugIn
[10/26/10 17:25:30] module: DXWSetup (Jun 2 2010), file: psheets.cpp, line: 498, function: PreinstDlgProc
[10/26/10 17:34:45] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 175, function: GetDXVersion
Error: (2) - the system cannot find the specified file.
[10/26/10 17:34:45] module: dxupdate (Jun 2 2010), file: dxupdate.cpp, line: 4515, function: DirectXUpdateDownloadPlugIn
[10/26/10 17:34:46] module: DXWSetup (Feb 4 2010), file: dxupdate.cpp, line: 386, function: DownloadPlugIn
[10/26/10 17:34:46] module: DXWSetup (Feb 4 2010), file: psheets.cpp, line: 498, function: PreinstDlgProc
Please write to the Microsoft Forums.
Note: Please make sure that the DVD DRIVE is the first boot device.
1. Insert the DVD of Windows 7 and restart the computer.
2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
3. click on 'Next' and then click 'repair your computer '.
4 Please, highlight 'Windows 7' and click 'next '.
Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.
CHKDSK /R
6. Please let me know if an error is detected.
Thanks and greetings
Support Microsoft-dieng
Visit our Microsoft answers feedback Forum and let us know what you think
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/
"An internal build error has occurred. Please check the error log. »
The background in the my application has been configured for white, now even that returns to the default gray
Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
Thank you Maybe you are looking for