Status.msi

C:\Users\tamar\AppData\Local\Temp\7zS1F94\setup\Status\
never ends the message window, if the system wants to update something.
I remember, she was every time.
JUST, IT DOESN'T STOP ME SAYING: ok, if you want to try again,
or cancel, which shows me another small window tells me,
Status.msi is not found.
THE FIRST TIME, seems, it WAS WITH MY HP SCANNER/printer. I CAN'T LEAVE IT PLUGGED IN.
IF I WORK IN THE LIVING ROOM AND IT IS NOT NECESSARY, EITHER.

I PUT THE HP INSTALLATION CD INSIDE AGAIN, WHEN HE ASKED ME THE FIRST TIME.

If it's hp at all... I'M WAITING FOR a PC of NEGOTIATING a NEW TOP RAM (more than 4, or more than 6) / labtop, anyway...
BUT I DON'T KNOW WHY I SHOULD CHANGE TO VISTA, SIMPLY because WHAT 99% SWITZERLAND has BEEN
TOO STUPID TO UNDERSTAND...

Hello

It's to do with the HP printing software.

Read the first marked as answer to reply in this thread:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/statusmsi-error-message-after-HP-printer-software/fc920e97-956f-411e-98D2-e79a4602cacf

See you soon.

Tags: Windows

Similar Questions

  • get the error message "status.msi".

    After insalling windows XP Pro SP3 yesterday, everything was fine. Today, I turn on the computer and get this continuous message "status.msi" missing. I have accumulated my brain trying to find the file with no luck. Done a repair and still a problem.
    Also in the auto updates SP2 would not up-to-date.
    I need help in the form of simple please...
    Thank you

    Hi Michael6208,

    ·         You get the error message for Windows update?

    Follow these methods.

    Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: For windows, update problem, disable the security software temporarily.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article to reset the Windows Update components.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • How can I remove the 'State' that wants an installation package "status.msi" I do not have?

    This laptop does not accept even in SP3. It doesn't have enough RAM for Win7.   I got rid of bad bits with chkdsk.  Status tries to install all the time & I can't find how to remove it.

    Hello
    I've got SP3 now after 2-3 attempts.  (Just 'failed to install.")
    And for the status "the component you are trying to install is on a CD or another removable disk that is not available."
     
    "Insert the diskette in the State, and then click OK.   Use Source 1. "The next window"cannot find an installation package for the product status.  Again the installation again using a valid copy of the installation package "status.msi." "
     
    The link with Microsoft wasn't working, so I checked on Google and found this annoying file is a file of HP printer so I deleted the HP printer program, which got rid of the file.  It seems, I then have to re - install the program without checking the update box, I'll try it when I have the time.
    Thanks a lot for your help.
  • HP photosmart C4599: StaTus.msi

    I recently had an upgrade of my HP printer program and as a result I got these STATUS popups > MSI which I can't delete or cancel. They popup in various locations at any time. I don't have the original disc for my printer and I find this annoying ajolly.

    What can suggest you for my old Toshiba Satellite L300 and my nerves. Thank you

    Hi @junior07,

    Thank you for visiting the Forums from the HP Support! I see a recent update went through for your HP Photosmart C4599 and now you get status msi pop up messages on your computer that is running the Windows Vista operating system.

    I would like you to follow the steps below:

    Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

    1. disconnect the USB key if you use a direct connection.

    2. remove the software HP C4599 PS to uninstall from the control panel of your computers an option of the program.

    3. restart the computer.

    4. make sure that all them that software PS C4599 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

    5. now, go ahead and download the software and drivers for your PS C4599 (DO NOT connect USB until the software prompts you to):

    HP Photosmart all-in-One Printer series C4500 Full Feature Software and Driver

    6. go ahead and print a test page.

    7. If you are unable to print a test page, run the HP print and scan doctor > www.hp.com/go/tools

    -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    Please let me know if it was successful!

    Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  • At the start, get a 'install status.msi' but the application is not on the computer

    At startup I get an "installation status.msi' but the application is not in my computer. Anyone know what this means?

    Hi Leo,

    The reference to status.msi file refers to the HP printing software. To solve the problem, please access CD HP printer and reinstall the software print or when you get the message about install Status.MSI please insert the HP printer disk and it will install the status.msi file, you will not receive a message to install it in the future

    ---------------------------------------------------------------

  • Status.msi error after update of the HP - Vista printer software download

    Everything worked well and then I downloaded an update from the HP printer software there is, through the application of updated HP and immediately after that I started having a few nights the following error message:

    "The feature you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. »

    In the "source of use:" drop-down list there, "C:\Users\Bob\AppData\Local\Temp\7zS73BD\setup\status."

    If I click on 'OK' it appears that the same error message.  If I click on 'Cancel' and then I get the error message following popup "an installation package for the product to the State cannot be found."  Try installation again using a valid copy of the installation package "status.msi".

    I tried to load the CD-ROM to boot for Vista (v.8.0.1) supplied with the printer (HP Officejet Pro L7580 all-in-one), but my computer will not play.  It will read start XP CD, but I can't find the file "status.msi" anywhere.

    Any help is greatly appreciated.

    Hi, I had exactly the same thing happen to me and I went crazy trying to solve this problem, but I did tonight and I want to tell you how I fixed it so hopefully it will fix it for you.  Run a desktop Dell with Vist Home premium 32-bit with SP2 and a HP 4315 all-in-one printer.  I got this answer directly from HP technical support.  I've updated via update HP and got an update of connectivity and had then windows Setup tries to install service.msi like you.  Here's what HP support said to do what I did and it fixed it.  go to start, all programs, uninstall HP, then select uninstall, everything.  Then go to http://support.hp.com enter your go product number for the drivers and software and then reinstall download it full of software and the driver.  Reboot and it should disappear.  Please let me know if it works
    Is the best,
    Kaja

  • Problem install Windows and "Status.msi".

    I have a new top of Tower HP G60-440 with Vista Home Premium.  I loaded the verion trail of the office which was provided.  I loaded the minor to my J6480 HP's printer and other software Hp Solution Center.

    Whenever I boot Windows install tries to find and install a software called "status.msi".  He is looking in my directory "c:\users\...\local\temp...". ».  It does not cancel or close without numerious attempt.

    What is it and how can it be solved?

    It seems to be a problem of HP software.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/fc920e97-956f-411e-98D2-e79a4602cacf

    Read the info on the link above.

    If necessary:

    http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=au

    Online 24/7 support for home and individual HP products

    See you soon. Mick Murphy - Microsoft partner

  • "The feature you are trying to use is on a network containing the installation package"status.msi"in the box below.

    Original title: the status message appears on the start page.

    Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

    Hello

    Have a few questions that might help me to analyze the cause of the issue you're having with your computer.

    ·         When you get the message that says, "Status.msi file missing?

    ·         You have an installed HP printer?

    ·         You made any hardware or software changes the computer recently?

    Method 1:

    You can try to clean boot and check if you still get the error message.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the article.

    Method 2:

    If the problem persists, you can try to restore the system on your computer and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Hope this helps

  • At startup I get an "installation status.msi' but the application is not in my computer. Latest resonses do not help

    message says:

    Status

    The feature you are trying to use is on a network unavailable resource.

    Then message says:

    Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

    Then message says:

    Use source

    C:\users\HAROLD~1\AppData\Local\Temp\7zSIA68\Setup\Status\

    Then message says:

    Could not find an installation package for the product status.

    Ttry the installation again using a copy valid of the installation package "status.msi".

    Hi Harold,.

    (1) during how long have you had this problem?

    (2) what happens after response are you referring? Please provide the link if you are referring to any position

    (3) remember you to make changes prior to this problem?


    Method 1:
    activate the boot and then check if the problem persists

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.


    Important:
    n ' forget not to put the computer to a normal startup follow step 7 in the link.


     

    Method 2:

    Run Disk Cleanup to delete temporary files

    Delete files using disk cleanup

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  • 2732 (Installation Package "status msi" error message

    Hello:
    I bought a HP Touch Smart computer all-in-one is August 2009. Since that time I got the error message 2732 every time that the computer starts. I just end the process so that I can continue to work.  The message also States that the "necessary resources come from a network and are not available.... "The file that the research process is not available. It's a Windows installation package he seeks. When I go to the MSI of State and try to "Uninstall" so that the process does not start when I turn on the computer, I get a message that says: it is not installed.  It's more annoying than anything, but I don't want no problems later.
    Help, please!  Thank you

    http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/update-failed-looking-for-status-MSI/m-p/77525

    Above is an example of one of the error messages typical of HP that can be displayed.

    You will find that the error is related to the HP software.

    Contact HP:

    http://welcome.HP.com/country/us/en/contact_us.html

    See you soon.

    Mick Murphy - Microsoft partner

  • Status.msi is not available.

    Message says:
    The feature you are trying to use is on a network unavailable resource. Click OK to try again or enter a path of altrnate in a foulder containing the installation package "status.msi" in the box below.  I can't find this file on my computer.  This message keeps me to run some of my programs.

    http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/update-failed-looking-for-status-MSI/m-p/77525

    This is often a problem of HP; read link above

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    They will help you in the Forum Vista programs at the above address.

    See you soon. Mick Murphy - Microsoft partner

  • Error "the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.»

    What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one.  It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.  It's also prevents me to access my backup disk.

    Original title: status.msi?

    I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow.   Thank you

  • Status.msi error with installation of the hp officejet 6500 E709n wireless

    It's frustrating.

    "I tried to install a full print driver software for my portable printer wireless hp officejet 6500 E709n and even if I can complete the process, I get this error message: the component you are trying to use is on a network unavailable resource.

    When I click 'OK', I get a "status: the path..." OK6500vE709_Full_14\setup\status\status.msi could not be found. »

    I then get a third message that appears each time you start to the top of my computer hp laptop dv6871us: "Please wait while Windows configures the status.  And... It's constantly repeated ad nauseam.

    How can I find the status.msi file and stop this endless loop of error messages?

    TX

    Yes, it's very good information.  Thank you to be thorough to me.  I actually had this happen to me personally on my Windows XP and printer Photosmart older (different error message but even constant pop up).  I could easily (but a lot of time, I might add) fix my problem of:

    1. uninstall the printer from Add/Remove programs.

    2. run cleaning disc of all programs > Accessories > system tools > disk cleanup.

    3 restart the PC.

    4 selection of a backup in CCleaner system option and then cleaning the registry using this tool. Click here and carefully read the reviews in CNET and opt to download the tool to see what I mean.

    5. restart the PC again.

    6. can download and install my printer on the site, but in your case, here are the drivers and the software feature full Officejet 6500 Wireless (the link is for the version of Windows 7 32-bit PC U.S.).

    This can become very difficult at times, so I want to provide this very comprehensive document from HP which covers your exact error message and their favorite not to try.  Mine are a little easier but a 'tad - little' more risky because I provided a link to a specific 3rd registry part cleaner that you use at your discretion (there are others out there).  I like it because I can back up my system first in the case where that something else has been removed should not have been.  I don't have that happen, fortunately.  Please read this document as well just to be on the safe side.  I'm here to help (do not do worse) so let me know if I need to explain something better, but I think that you have everything you need here to start.

    -Theresolution of the MSI boot errors-

    Let me know how it goes!

  • Windows Installer keeps trying to install msi.status but it will not install

    Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

    Hello
    In my view, that it is a software HP printer problem. Please, try the following:

    If you have the HP software on your PC support (printers, etc.)
    the disc when the pop-up window displays a location '1'. Click Browse
    then open the HP disc in the CD drive. A named icon status should
    appear. Click on this icon and load. This will get rid of the
    Status.msi loop.

    If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

    http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

    I hope this helps Mark <> Microsoft Partner

  • files missing msi.dll in win xp sp3

    When I start my system, a panel appears 'status' and tries to install a file called status.msi.exe or dll, sometimes one or two, and it asks for the location of the file that does not exist. then I asked the system disk, which does not exist because the version installed is version preloaded to xp sp3 prop. so I in oreder for the system to continue to use the Task Manager to end the try to install this file. I used the auditor of the filesystem for the attempt to locate this file but it conplète canoe as it also asks that the disc windows xp sp2 instalation so. is there a way to replace this file from another source that will fix this problem?

    Hi Bill,

    You can try to install the latest Windows Installer.

    Download details - Microsoft Download Center - Windows Installer 4.5

    If this is not enough, you may need to perform a repair installation, you need a CD.

Maybe you are looking for