status of battery

Similar Questions

• How to check the status of battery for Cyber-shot?

  How to check the status of battery for Cyber-shot?

  Depends on what Cyber-shot you have - in General, there should be a DISP button, or menu on site that display. The State of the battery is usually at the top right.

  The DISP button is usually the UP button.

  In addition, depending on the type of use of the Cyber-shot battery, it can never just to display the bars, or it can show a percentage.

• The battery status icon does not display the symbol of the AC power cord when the laptop is running on the current and recharge

  I have a Compaq presario with Windows 7 Home Premium 64-bit. A few years after an update of Windows, the status of battery in the systray ICON ceased to display the amount of time left on the battery and it stopped display the symbol of the AC power cord when it was being turned off of the AC adapter.  If I remove the battery, then the cord appears.  Put it back in the slot and the rope faints and I have the same shape of rectangle get you if the computer is running on battery only.  Any ideas how I can get the cord to display when AC power feeds the laptop.

  The accumulator is recharged, but there is no busy indication, apart from the height of solid white fill.

  Hi Graeme,

  Thanks again for the update.

  Laptop computer should turn on without the battery when it is connected directly to the power source. As Techgod said it could be a hardware problem, it is possible that the problem is with the battery.

  I suggest you to contact the manufacturer of the laptop to get help.

  Compaq support
  http://www.Compaq.com/CPQ-country/cpq_support.html

  Thank you

• The yellow battery icon?

  the status of battery on my iPhone icon suddenly started showing in yellow. the phone is charging normally. I tried the telephone switching market. Anyone know if it's ok or it indicates a potential problem?

  Hi Lesleyjo

  The yellow icon says you had Low Power Mode active.

  You can disable it here:
  Settings > farm > Toggle Low Power Mode disabled

• Management of energy has said that my battery is illegal?

  Hello

  I just got a laptop Y500 and since the first installation of Windows 7, each time on booot place I get popup message saying my battery is illegal. In the Lenovo energy management software, I also have status illegal battery.

  How to solve this problem?

  Thank you

  Gorast

  Hi skullmonkey,.

  Thanks for posting and welcome to the community. Could you uninstall and reinstall the driver of Lenovo energy management. This can be downloaded from the link below.

  http://download.Lenovo.com/Consumer/mobiles/cagt32ww.exe

  I hope this helps.

  Concerning

• Touchpad battery not charging past 5468mAh

  I just bought the touchpad two weeks ago and happened to the the29th of August, and the battery won't charge past 5468mAh!  I have Dr. battery installed, and the title of health, it indicates the maximum capacity I have 6231mAh, but it says 100%, to 5468mAh.  I would be very happy for any help or advice on this subject.  Thank you!

  You can run a health Diagnostics under Device Infobattery test. Choose the powerto choose the battery, then press Start. If you get a GREEN or ORANGE battery status, the battery is good. If you get a RED the device needs a repair or replacement under warranty.

  We cannot rely on 3rd party applications to test the battery from Touchpad.

• play a sound custom 'discharge of the battery' and events 'battery full '.

  IM developing an application for the status of battery... I used class BatteryInfo why... I added a switch box qml to get the status of battery on specific event... now I want to add sound to the full battery and battery...

  Help, please

  Thank you

  looking at your code return you something, then play you the sound.
  code after a return is not executed.

  Yes, you can access the label using findChild, but it would be a new question for a new thread.

• Smartphone blackBerry BOLD 9000 battery

  Hello

  My 9000 "BOLD" after a year and a half of good work, do not charge the battery, the battery icon may have lightning yellow, sometimes, it is not, in any case, do not charge the battery, I tried with a new (original) charger and a new battery (original), nothing to do, in very rare cases, the battery seems to load 20% (old or new) after with yellow lightning relative to taxation will not on. I also tried the PC the yellow Flash appears but nothing.

  Now the warranty is still valid, that I can do something or it's better to send the phone to support me?

  Your

  Alberto Dell'omonimo (Italy)

  Hey namesake.

  Welcome to the community of BlackBerry Support Forums.

  When you try to load the BlackBerry® the unit please go into the Options and status, the battery percentage increase? If so, I'd say backup and complete a clean reload software f of the BlackBerry® device as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320

  If the percentage has not increased for warranty, please contact your point of sale and repair options.

  Thank you.

• iRat - remote client?

  MacBook Air (13 inches, beginning 2014)

  El Capitan 10.11.3 OSX (15 d 21)

  Intel HD Graphics 5000 1536 MB

  Presentation of the material:

  Model name: MacBook Air

  Model identifier: MacBookAir6, 2

  Processor name: Intel Core i7

  Speed of the processor: 1.7 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 4 MB

  Memory: 8 GB

  Boot ROM version: MBA61.0099.B21

  Version of the SCM (System): 2.13f15

  -----------

  See a strange activity in my logs and I wanted to get feedback and know if I should be concerned.

  --------

  The papers below are appearing in a folder in the Console called CoreTelephonyTraceScratch > CSI.scratch >

  in names such as csi.txt - 0 x 0, 00000000 00000001 - csi.txt, 0x00000002 - csi.txt.

  The files seem to be generating temporarily when I connect, disconnect and then being iterative deleted. I don't have an iOS device that I connect to this machine. Newspapers are running if I'm wired or Wifi, connected on my home network. I'm not a programmer, but it looks like the wide and Google has done nothing to reassure me. I found this - hacked OS EL CAPITAN

  Thanks in advance.

  -------

    0.052 [I] evt: Firing event 'recalculateConnectionAvailability': with params= 0, Wifi Changed
  0.052 [I] DATA:TechDriver:handleWifiAvailable_sync: fWifiInterfaceName changes from en0 to
  0.052 [I] DATA:TechDriver:TechDataDriver: <0x7fa3baf2a450> created
  0.052 [I] DATA:ServiceController:DataServiceController: <0x7fa3bae150b0> created
  0.052 [I] DATA:ServiceController:recalculateConnectionAvailability: fRadioModuleCreated is false, bailing for now (Wifi Changed)
  0.052 [I|17+] ent.ctr: Initializing Carrier Entitlements Controller
  0.052 [I] NOBB:NoBBRegistration_NOSUPPORT:NoBBRegistrationController: Object constructed <----------
  0.053 [I|17] ent.ctr: ================================================================================================
  0.053 [I|17] ent.ctr: Reset called upon with update: false and reason CheckEntitlementsReason::kSelfInitiated
  0.053 [I|17] ent.ctr: ================================================================================================
  0.053 [I|17] ent.ctr: Potentially instantiating Entitlements Command Driver
  0.053 [I|18+] ent.psh: Reset Push Listener
  0.053 [I|15+] csi.session: handleLoginSessionStateChange_sync(): Session is logged in
  0.053 [I|15] evt: Firing event 'loginSessionStateChange': with params= 1
  0.053 [I|15] csi.session: initialize(): loginSessionActive: true
  0.053 [I] evt: Firing event 'recalculateConnectionAvailability': with params= 1, Login session state changed to true
  0.053 [I] evt: Firing event 'recalculateConnectionAvailability': with params= 1, Login session state changed to true
  0.053 [I] DATA:iRatController:handleLoginSessionStateChanged_sync: Session is logged in. Start iRatClient
  0.053 [I] DATA:ServiceController:recalculateConnectionAvailability: fRadioModuleCreated is false, bailing for now (Login session state changed to true)
  0.053 [I] DATA:ServiceController:recalculateConnectionAvailability: fRadioModuleCreated is false, bailing for now (Login session state changed to true)
  0.053 [I] DATA:iRatClient:start_sync: Starting iRat Client
  0.053 [I] DATA:iRatClient:register_sync: register with server: {
  "kMessageId": 1u,
  "kMessageArgs": {
  "kWCMRegisterProcess_ProcessId": 7u
  }
}
  0.054 [I] 5wi: Constructor: fCountrySetFlag set to false
  0.055 [I|24+] sysobs: Polling for the states of screen, lock, reachability status, and battery saver mode
  0.055 [I|22+] 5wi: No retrieved value for SystemDeterminationManager::ConnectivityHelperType
  0.056 [I|22] 5wi: No retrieved value for kEnableIMSUserPreference, using default false
  0.056 [I|17] ent.ctr: No Entitlements Driver
  0.056 [I|17] ent.ctr: Adding FaceTimeOverCellular to not supported
  0.056 [I|25+] max: Switch support retrieved ----- 3G switch support: DataRateSwitchSupport::kUnknown, LTE switch support: DataRateSwitchSupport::kUnknown
  0.056 [I|25] max: User preference for Enable 3G: DataRateUserPreference::kUnknown with 3G switch support: DataRateSwitchSupport::kUnknown
  0.056 [I|25] max: User preference for Enable LTE: DataRateUserPreference::kUnknown with LTE switch support: DataRateSwitchSupport::kUnknown
  0.056 [I|17] ent.ctr: Adding Tethering to not supported
  0.056 [I|17] ent.ctr: Adding Agent to not supported
  0.056 [I|17] ent.ctr: Adding VoWiFi to not supported
  0.056 [I|17] ent.ctr: Adding Thumper to not supported
  0.056 [I|17] ent.ctr:
  0.056 [I|17] ent.ctr: Generating entitlement changed events
  0.056 [I|17] ent.ctr:
  0.056 [I|17] evt: Firing event 'entitlement_changed': with params= 0000000000, 0000000000, 0111001100, EntitlementResults(Phone Number:Unknown, SubscriptionAndUsageStatus:Unknown, FaceTimeOverCellular:Unknown, Tethering:Unknown, Update Push Token:Unknown, Perform Auth-Only:Unknown, Agent:Unknown, VoWiFi:Unknown, Thumper:Unknown, VVM:Unknown, )
  0.056 [I|25] max: User Preference evaluated ----- 3G switch user preference: DataRateUserPreference::kUnknown, LTE switch user preference: DataRateUserPreference::kUnknown
  0.057 [I|17] ent.ctr: Invalidating Entitlements State with reason CheckEntitlementsReason::kSelfInitiated
  0.057 [I|24] DisplayStateModel:changeFlag: DisplayIsOn, from true to true
  0.057 [I|24] evt: Firing event 'statusBarVisible': with params= 1

  And then some time a bunch of it in newspapers

  ----

  1622.591 [I] xpc.watchdog: Server Watchdog: checkin

  1637.610 [I] xpc.watchdog: reminder Watchdog: checkin

  1637.610 [I] xpc.watchdog: Server Watchdog: checkin

  1652.593 [I] xpc.watchdog: reminder Watchdog: checkin

  1652.593 [I] xpc.watchdog: Server Watchdog: checkin

  1656.015 [I] csiapp.info: Application is started: AppInfo [Google Chrome, com.google.chrome, true, 837, 0]

  1667.594 [I] xpc.watchdog: reminder Watchdog: checkin

  1667.594 [I] xpc.watchdog: Server Watchdog: checkin

  -----

  then stuff like this

  ----

  49669.223 [I] DATA: ServiceController:recalculateConnectionAvailability: nothing has changed because of the Wifi has changed

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings:

  49669.223 [I] data: no dictionary of TechSettings cannot be found

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: 0

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: missing APN info

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: missing APN info

  49669.223 [I] DATA: TechContext:0:stopUsing:

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: 1

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: missing APN info

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings: missing APN info

  49669.223 [I] DATA: TechContext:1:stopUsing:

  49669.223 [I] DATA: TechDriver:refreshAllDataSettings:

  49669.223 [I] DATA: iRatController:subscribeLineTypes_sync: with app Types)

  49669.223 [I] DATA: iRatController:subscribeLineTypes_sync: subscribe Types app has not changed

  49669.223 [I] evt: event "recalculateConnectionAvailability" shooting: with params = 0, reconfigured Tech configuration

  49669.223 [I] evt: event "recalculateConnectionAvailability" shooting: with params = 1, DataServiceController of activation

  49669.223 [I] DATA: connection: Bootstrap: canActivateTrigger:

  49669.223 [I] DATA: connection: BootstrapRoamingInternetBypass:canActivateTrigger: isRoaming: fake, canActivate: false

  49669.223 [I] NOBB:NoBBRadioModule_NOSUPPORT:getCellularDataIsEnabled:

  49669.223 [I] NOBB:NoBBRadioModule_NOSUPPORT:getCellularDataIsEnabled:

  49669.223 [I] NOBB:NoBBRadioModule_NOSUPPORT:getCellularDataIsEnabled:

  49669.223 [I] NOBB:NoBBRadioModule_NOSUPPORT:getCellularDataIsEnabled:

  49669.223 [I] NOBB:NoBBRadioModule_NOSUPPORT:getCellularDataIsEnabled:

  and this...

  52013.383 [I] xpc.watchdog: Server Watchdog: checkin

  52020.321 [I] DATA: Collocation_NoBB:0:dataCollocationAssertionUpdate: tearDownNow = true

  52020.322 [I] DATA: Collocation_NoBB:1:dataCollocationAssertionUpdate: tearDownNow = true

  52020.322 [I] DATA: ServiceController:___ZN21DataServiceController21deactivateNonAssertedEv_bl ock_invoke: nothing to wait

  52020.322 [I] DATA: ServiceController:waitForDeactivateNonAsserted: result code 0

  52020.322 [I] pwr: CSI telling to go low-power

  52020.322 [I] NOBB:NoBBRadioModule_NOSUPPORT:canEnterLowPower:

  52020.322 [I] pwr: CSI can enter low-power, so now say to do

  52020.322 [I] NOBB:NoBBRadioModule:enterLowPower:

  52020.322 [I] pwr: go to sleep.  Heard of CSI in 0.000131011 seconds

  52020.322 [I] NOBB:NoBBRadioModule:enterLowPower_sync:

  52020.322 [I] evt: internal notification to params (17) kEventEnteringLowPower = {0, 0, 0 x 0}

  52020.322 [I] evt: event "enterLowPower" shooting

  52020.322 [I] DATA: TechDriver:enterLowPower: go through the low-power mode

  52020.322 [I] DATA: TechDriver:callbackEnteredLowPower: reminder of the Low Power call

  52020.322 [I] NOBB:NoBBRadioModule:finishEnterLowPower:

  52020.322 [I] NOBB:NoBBRadioModule:finishEnterLowPower_sync:

  52020.322 [I] NOBB:NoBBRadioModule:finishEnterLowPower_sync: calling reminder of low power, the result is 1

  52028.361 [I] xpc.watchdog: reminder Watchdog: checkin

  52028.362 [I] xpc.watchdog: Server Watchdog: checkin

  52045.721 [I] pwr: CSI by telling low power output

  52045.721 [I] NOBB:NoBBRadioModule:exitLowPower:

  52045.724 [I] NOBB:NoBBRadioModule:exitLowPower_sync:

  52045.724 [I] evt: internal notification to params (18) kEventExitingLowPower = {0, 0, 0 x 0}

  52045.724 [I] evt: event "exitLowPower" shooting

  52045.724 [I] DATA: TechDriver:handleExitLowPower_sync: low power mode that exists

  52045.766 [I] DataNetworkMonitorOSX:handleNetworkStateChanged_sync: nwi_state: 0x7fbb12771c50

  52045.766 [I] DataNetworkMonitorOSX:checkIPConnectivity_sync: * ipConnectivityAvailable: false

  52045.766 [I] DataNetworkMonitorOSX:checkIPConnectivity_sync: fCurrentIfName: 'en0 '.

  52045.766 [I] DataNetworkMonitorOSX:checkIPConnectivity_sync: ipConnectivity down. Previous main interface: 'en0 '.

  52045.766 [I] evt: event "dataWifiAvailable" shooting: with params = 0, {}

  52045.766 [I: 22 +] 5wi: handleWifiAvailable_sync: currently available = true, new value = false

  52045.766 [I] DATA: TechDriver:handleWifiAvailable_sync: available = false

  52045.766 [I] NOBB:NoBBRadioModule:handleWifiAvailable: available = false

  52045.766 [I] evt: event "recalculateConnectionAvailability" shooting: with params = 0, Wifi has changed

  52045.766 [I] evt: event "bearerAvailable" shooting: with params = 0, kNoData

  52045.766 [I] DATA: TechContext:0:handleWifiAvailable_sync: looking for in the list of the updated interface en0

  52045.766 [I] evt: event "dataModeChanged" shooting: with params = kNoData, kNoData

  52045.766 [I] DATA: TechContext:0:handleWifiAvailable_sync: Interface en0 is gone, claire fActiveInterfaceName

  52045.766 [I] evt: event "dataNotAttached" shooting

  52045.766 [I] DATA: TechContext:1:handleWifiAvailable_sync: looking for in the list of the updated interface en0

  52045.766 [I] DATA: TechContext:1:handleWifiAvailable_sync: Interface en0 is gone, claire fActiveInterfaceName

• Satellite M40: USB Audio does not work properly in ACPI mode

  Hi all
  I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
  For this, the USB audio devices are an excellent solution.

  Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.

  After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
  This is a workaround.

  But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
  Actually, my laptop is no longer run as a laptop :(

  I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.

  This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.

  My question is:
  Is there a driver / updating bios that gets rid of this problem?
  If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.

  Thanks in advance.

  [Edited by: admin]

  Hello

  I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.

  Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.

  The computer ACPI PC Standard mode change is one of the many solutions and proposals
  You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
  Also change the performance options in the options of the system to adjust for best performance.
  Disable Windows messenger.
  Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
  In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
  Disable the peripherals such as scanner, printer.

  As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.

  Good luck

• G500s loading problems

  Hello

  I've been using G500s for 2 years. Is having some problems of charging since last 1. After using for a while or playing a game, his forehead two LEDs (ON / OFF status and battery LED) began flashing and portable load order. After a while he starts again to load and keeps repeating this process. Initially it was rare, but now it happens every time. It's very irritating. Please tell me what is wrong with my laptop or any other solution that I should try. I already tried to take the battery out and pressing power for 30 seconds and also I updated to the drivers of the battery. I will wait for you for a quick response. Thank you.

  I gave my laptop for repair and discovered what was wrong with her. In fact, power jack (connector) burned and was not working. I'll have to get the repaired part. Service shop people have not been able to find this replacement part yet. I hope it gets fixed soon.

• I don't see the apps or the lock screen

  When I turned on my iPad air all I could see was the time wifi status and battery %. The screen is in this context, and I could not zoom or use anything except the notification on the top settings and fast on the bottom bar. My son is a huge computer guru and he said that he has never seen anything like it! Someone please help.

  Try a reset by pressing the power button / stop and the "home" button until you see the Apple, then let go.

• XPS 13 9350, "plugged in, does not support".

  New machine, the first time I started it up I got this warning message:

  Product name: XPS 13 9350
  System BIOS 1.0.0
  Service etiquette: xxxxxxx
  ePSA: Build 4302.10 UEFI ROM
  The attention! Power adapter AC power and the type cannot be determined. The battery may not charge. The system will adjust the performance to match the power available.
  Note: This warning can be disabled in the BIOS Setup.

  I don't worry for a couple of days, but when I plugged in the power adapter, the battery status said "battery level of 48% (plugged in, does not support).

  In the settings of the BIOS under General battery information, he showed "AC adapter / CC = unknown" under System Logs, events of the BIOS, he showed: DateTime "alert!" Unknown sector adapter, can affect performance. »

  I clicked on the 'Diagnostic' button on the start page alert and Dell SupportAssist under "Battery and AC adapter" report shows "current adapter: 1 watt adapter, top: n/a, low: n/a.

  The little blue light on the plug of the adapter lights up.

  Many people have encountered similar problems with Dell laptops, but there only seems to be as well as workarounds and very few solutions. I have a very short time period in which to return the machine, and I'm not at all a type of material, so I'm not opening upward.

  Suggestions for solutions/FAST?

  Thank you
  Chris

  Rishi,

  Yes, I did and it works! The MS Store sent me one as well, but it was a 90 watts, not 45 adapter. It turns out that they don't have. They sent me a backup battery, which is nice. Find out what Amazon of the adapter I got:

  www.amazon.com/.../B00EM2V8AS; PSC = 1 & redirect = true & ref_ = oh_aui_detailpage_o00_s00

• BlackBerry Curve 8330 Blackberry Smartphones: Spinning hourglass and no email

  I have a Blackberry Curve 8330 (about two months) on network VerizonWireless. Yesterday, I started to see a spinning hourglass that wouldn't go away, and now I can't receive emails. (I'm not on a customer business). The signal shows 1XEV connection and I see the ' up/down' arrows flashing periodically, but still no email comes through. All except the standard five applications are closed and I tried the option "remove the battery when the unit is running and wait a few minutes before plugging it back" does not. (The hourglass stopped for a few minutes, but came back and I'm still not received my email).

  STATUS

  Battery: 65%

  Free file: 34379991 bytes

  File total: 83623936 bytes

  Another challenge is that I use a Mac with OS X 10.4.11, not a PC based on Windows, so I don't have the software Manager to use.

  Can someone give me an option before taking this thing back to the store?

  Thank you

  m

  @rmaurer: I forgot to mention the battery drain, but the mine who did as well.

  The idea of 'everything back and get another' is never very satisfying for me. Especially if I have to keep doing it over and over again (like bobcawman, above), and he never really addresses the problem. If this is the case, then it seems that I bought a bad product, not only got a defective unit.

  The solution for me was to back up all my data by using the Desktop Manager, then reload the operating system of the VZW website software. The process was a bit complicated, and I'm sorry, I don't remember the exact steps to share here, but there is an option on the web site for the latest version of the software (4.5 for Verizon, I think). That solved the problem for me so far. I suppose however that the real question, why what is happening with so many people. I've seen many, many messages on exactly the same thing. I wonder if it's an issue just with the previous version of the software, or something more serious with the 8330 in general operating system.

  I'll wait and see...

• Super Micro servers ESXi 5

  We are currently stuck running with a 3Ware 9750 Raid card normally I would like to run servers HP esx4.1, but it's a long story.

  I'm looking for some advice on an array controller that support 4 internal ports for sata 3 gb/6 GB disks.

  I am looking for vsphere support so we can monitor the status of the drives and the table directly from there.

  LSI suggestion at this stage, therefore a small Linux on each host that is running the software 3dm using the direct path to access the controller.

  I'm not sure it's the best thing, but a machine using 256 MB of ram would not be the end of the world.

  Others use? I can't be the only one in this situation.

  

  Battery tests are run automatically by the BIOS OF THE controller.  VCenter can be configured to warn on the RAID array status or battery status issues.