status of the computer to run LabVIEW 8.6 remote façade

Similar Questions

• HP Officejet 6500 Paper Out status on the computer but the paper loaded and test page prints

  We have a HP 6500 CB815A, which works well for almost a year. As of today, we get "Paper Out" status on the computer, but there is paper loaded in the tray... the same high quality paper as we always use. The test printer utility reports the same status. However, the printer can print a test page and fax without printing problem status.

  I unplugged for 30 seconds to reset, but we get the same status.

  Someone has had this same problem and solved?

  Thank you

  Dave

  If you have not tried to reboot your PC, I would. If this does not clear the issue, I would follow the following steps:

  1. Click Start-> Control Panel
  2. Select uninstall a program (it's the heading programs)
  3. Find your driver HP software; Select it by clicking on it once, then select Edit. If the change is not available, select uninstall/change.
  4. Select repair and then follow the prompts for your software repairs itself.
  5. If your software does not have the repair option, it may be advisable to download the latest drivers from support.hp.com site. Uninstall the drivers for your printer, and then reinstall them using.

  If these steps do not work, please post and I can continue further with troubleshooting.

  Good luck

  Brent

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• wake the computer to run an antivirus scan

  Is it possible to activate the computer to run an anti-virus scan?  I use The Shield antivirus program, and when I schedule a task to wake the computer and a scanner, it is unclear what part of the computer to scan and so he does nothing.  I don't know if the field "argument" is where I said what file to be reviewed or what, but I couldn't begin to know what to put as the argument anyway.  I can program the computer to run a scan when he's awake.  There is a task called awake auto that wakes the computer; It is a task that I could plan to run before the antivirus scan to allow the scan to run without the Task Scheduler from the analysis?  Do you know if the task of awakening auto has a path?

  Hello

  Please look here for detailed information:

  http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.html

  Concerning

• My mouse and the computer to run slowly why? What must I do to fix

  My mouse and the computer to run slowly why? What must I do to fix

  Hello
  Follow the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Low configuration computer cannot run Labview real-time

  Hi all

  I'm a little confused when I run Labview in another computer. The application written by my laptop already worked well. Then I package it and installed on another computer.

  The application can run in this computer as well, but the waveformchart (to display the data) could not keep time real (about 5-6 seconds of delay).

  I tried to install the second computer, and he could run well as it did in my laptop

  So, I don't know where the problem was. I guess the computer configuration affect the speed of acquisition? (Because the first computer I installed was version and has a configuration below)
  (I used Arduino to get the data through processes with labview and analog pins)

  Please see and tell me what exactly is my problem?

  A few tips:

  -All operations that don't rely on the acquired data, their outside the while loop (for example some of the functions of filter design) because you probably don't have to do it once at the beginning

  -The LIFA Toolbox is no longer supported and has been replaced for a long time by the LINX Toolbox - you can consider using the Toolbox current taken in charge

  -Your loop at the top of the diagram does nothing - you take an array of 1000 points and index the elements in an array of 1000 points - so does not change the table - just straight through wire.

  -You may want to consider using an architecture of producer/consumer - write data to files is slow and can be slow down your loop (especially on an old hard drive!), if you put the data to another loop, you can write to file without slowing down your data acquisition.

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Display disappears after the period of non-use. The display is fine (a plasma), the computer is running. But no display and must restart.

  Hi-for no apparent reason, the computer has developed the following: after a period of non-use (always on computer), when I re - turn on the monitor I get a black screen.  Using the mouse, knocking every possible key produces no image on the monitor.  Meanwhile, the hard drive is very hard.  Only the appeal should restart.  Any ideas?

  As I said it's a guess.

  Let us know if find you the solution.

• XI of hp photosmart 2710 can I connect directly to the computer? running Windows 7

  I have a computer with Windows 7, also have another all-in-one printer

  but want to know I am able to connect Hp Photosmart 2710xi directly to the computer?

  Hi funtimepatty,

  Yes, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c01796736

• Why update my web browser page increments the number of users connected to my remote façade?

  Hello

  I use LabVIEW 2010 and a cRIO-9118 to broadcast my RT of frontage on the web with a Web server.

  I configured the web server to be able to control my front remotely. However, I have a problem with "Refresh" browser.

  When I press 'Enter' to find the address of the web server, the number of connected users seems to increment by one and then tells me that "too many users are connected to the façade. Once this was done, the only way to "unlock" the web server must restart the cRIO.

  Is there a solution to avoid this problem?

  My current web browser is Internet Explorer 8.

  Thank you

  Hi Mathieu,

  Unfortunately, there is currently not a very good solution for the problem you are experiencing. It seems that it is a known issue that works in R & D. It is that in addition to simply refreshing, this problem also occurs if you try to access the remote façade using a second tab in a tabbed browser. A "fix" would be to invest in a higher façade remote County license. If this is not feasible, then the current recommendation would be to avoid the connection to the façade remotely from a second tab or refresh the view in your browser. Once you exceed the number of connections to the remote façade, you must restart the RT controller - it is not a way to change this default behavior. You can follow all the patches in R & D by keeping the CAR (corrective action request) ID mark for this question, which is #202702.

• I don't have a system recovery disk. I don't want to lose the data stored on my hard drive. The computer is running in SafeMode only. Need suggestions?

  It is a HP touchscreen computer.  It runs on Vista Home Premium.  It is about 3 years old.

  Hello

  you use a flash drive or an external hard drive to copy your data

  you plug a flash drive, etc. - to data you want to save - right-click on it - send the USB stick, etc.

  _________________________________________________________________

  and read this also:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  ______________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  for HP, you press F11 at startup

  You should have the choice of a destructive or non-destructive restore

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• My MAC computer cannot be stopped or restart from the GUI. Items on the desktop disappears however the dock is still there and the computer is running. All the solutions to this problem?

  This problem happened after I installed the software Avid Pro Tools with a PCI sound card. Th computer cannot stop the terminal. I tried to uninstall the avid pro software but the problem is still there.

  Hi AV@ahmed,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having this problem with your Mac Pro. If questions of this judgment has just started recently after installing Pro Tools and a sound card, and Pro Tools uninstaller seems not to have any effect, you can try pulling the sound card and a new test, such as described in the following article:

  Insulation in Mac OS X - Apple support questions

  Concerning

• I want to upgrade to win 7 XP he. I have 2 HD to the computer, one running XP and the 2nd running w2000.

  Question: Can I use the w2000 HD to install win 7, so clean all that HD and leaving the HD only XP? Or can I install win7 on XP HD, cleaning this one out, erasing the w2000 OS in the another HD, but leaving all applications and only data?

  Hi Dsears,

  Thank you for visiting Microsoft answers Forum.

  You can install windows7 in one of the hard drives, as long as you need.

  Windows 7 minimum hardware requirements:

  1. 1 GHz 32 - bit or 64-bit processor
  2. 1 GB RAM for 32-bit Windows 7 OR 2 GB of RAM for Windows 7 64-bit
  3. 16 GB available disk space 32-bit Windows 7 OR 20 GB for 64-bit Windows 7
  4. Supported graphics DirectX 9 with 128 MB memory (to enable the Aero theme)
  5. DVD-R/W drive
  6. Internet access or phone to activate Windows 7.

  Thank you best regards &,.

  Vijay - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.