Stellite L40-14B on failure after update BIOS 5, 40 - WIN

After I run the .bat file to archive (steb by step as in the statement), he says 'plise wait', but nothing happened. I wait about 5 minutes and restart manually and enter the BIOS version was 5.40. After I turn off laptop and it runs is not on. What can I do?

Unfortunately my friend... bad news... in your case something went wrong during the update procedure. Update the BIOS is always risky.

In my opinion, you must contact the ASP from Toshiba, which is responsible for you County and need to ask for help...

As far as I know guys could flashing the ROM module and then the laptop should run again.

Good luck

Tags: Toshiba

Similar Questions

  • Boot failure after update BIOS on T110ii

    I've just updated my BIOS on my T110ii (from 1.1.1 2.8.0) (because I've been doing a few crashes which must be fixed by firmware updates intel).

    However, after the update, it does not start and displays the seeing '3' with no output vga or ipmi diagnostic.

    The sequence is:

    * 3 diagnostic lights

    For a few moments 1 and 4 light as well, and fan goes to rpm max

    * Then only 3 stays on and the indicator of the health of the system flashes orange.

    The documentation suggests it is failure of CPU, but this seems very unlikely given that it was before the update of the BIOS.

    I tried to clear the NVRAM and disconnect everything I can from the motherboard, but it does not help.

    Is there anything else I can try?

    Are there known issues with the upgrade from 1.1.1 to 2.8.0? (I couldn't see everything in the documentation).

    I found some other threads where people have had systems that no longer start after updating the bios, so I wonder if there is an underlying problem.

    JimmyHo.

    The question wasn't just update the BIOS, it is to jump from a large number of updates. The people you see have reported the update problems that were often due to jump a lot of updates, including updates listed as Urgent. As each of the updates to the BIOS relies on the last, jump if you can lose substantial parts updates of BIOS. With going from 1.1.1 2.8.0 that you jumped 11 or 12 updates, so unfortunately it seems that the BIOS is now corrupt, which would require to replace the motherboard.

    I would like to know if this helps, although it is not what you were eager to hear.

  • Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

    Hello!

    After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

    ipconfig-all says:

    Adapter Ethernet LAN connection:

    Medienstatus...: En medium (disconnected)
    Suffix-Verbindungsspezifisches DNS:
    Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
    Physical address: 00-1B-24-98-D7-AA
    DHCP aktiviert...: Ja
    Autokonfiguration aktiviert...: Ja

    Thanks for your advice!

    Hello

    In your case I would uninstall the Realtek LAN driver.
    Can I visit the Realtek and download and reinstall the latest LAN driver.

    In addition, in the DOS command window, you can try to run this command:
    * Ipconfig / renew *.

    PS: Try to also set the default BIOS too.

    Concerning

  • My Equium L40 no longer works after update BIOS!

    Hi friends...

    Please, I need a help.
    I updated my computer laptop bios v2.00 v1.60 and after that it no longer works.
    When I try to turn it on nothing happens.

    Maybe I need the original BIOS.

    Who has a solution? What can I do?
    Could someone help me?

    Thank you!

    My laptop is a series of Equium L40 - PSL49E - 156

    Hello

    I can tell what you have to do now
    You will need to contact the ASP in your country for assistance

    Yes, you have the technician ASP.
    I assumed that the ROM module where the BIOS is stored has not properly been flashed.
    I think that the ASP will try again by using a special version of the flash BIOS

    Good luck

  • PXE - E61: media test failure after update BIOS on Dell Inspiron 5759

    Hi everyone and thank you in advance for the help.

    I explain the problem: after upgrading the BIOS to version 1.2.2 the laptop has rebooted and showed the following message appears:

    Realtek PCIe FE Family Controller series v1.36 (26/11/14)

    PXE - E61: Media test failure, check cable of

    PXE - MOF: Exit PXE ROM.

    No found boot device. Press a key to reboot the machine.

    I used diagnostic ePSA and the tests were all OK, then I tried to restore the default settings in the BIOS, but nothing has changed.

    Anyone has any advice to solve the problem?

    Thank you once again,

    Vittorio

    Here are two threads that you may find useful:

    Posted by Buckly53e - cannot boot after BIOS update:

    en.Community.Dell.com/.../19988584

    Posted by MUSTARD647 - error update of the Dell BIOS Inspiron 5459/5559/5759 - DOES NOT RESTART

    en.Community.Dell.com/.../19670909

  • Boot failure after update BIOS Thinkpad 2.59.1.12 on T530

    Hello

    After that Lenovo system update system was last updated, my laptop T530 does not a cold start successfully.

    A successive warm (with the interruptible splash screen) start works fine.

    But cold start always fails and that the powers of the system down in less than 5 seconds. After that you can see the BIOS updated to 2.59.1.12.

    Can anyone help me to restore the previous version of the BIOS (downgrade it)?

    Thank you.

    Failed to start cold is not seen with Bios Version 2.58.1.12.

  • Cannot use the recovery CD after update BIOS on Tecra 9000.

    Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

    Hello

    Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

    Can you please confirm if the method described in the previous ad works?

  • Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

    Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
    Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

    Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
    Took battery and RAM to see if I can delete it?

    Any ideas anyone?

    I think you mean BIOS * update * and do not upgrade ;)
    An upgrade is not possible

    However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
    Moreover I would load the default settings in the BIOS before starting Windows.

    If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

  • Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

    Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

    To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

    The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

    Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

    If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

    Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

  • Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

    Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

    Laptop computer has restarted:

    1 Fireed power led,

    2 Powered hard drive for 2 seconds to turn it off.

    3. stops...

    No Dell Logo, no beeps, can't go in the Bios.

    Test LCD works OK.

    Remove the module of Ram, power on and listen to beep

    Pressing the END key and power for laptop has no effect.

    Any idea?

    Yes. I did it.

    Laptop have bios Phoenix.

    Phoenix Bios have restored the USB Flash procedure.

    This procedure to restore the BIOS:

    1. download USB flash less than 4 GB.

    2 format in FAT.

    3. get your flash update of the Dell store - xxxx.exe

    4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

    5 extracted copy of Bios.cap for the flash player.

    6. turn off the power to the laptop.

    Next 7,8 step may not be necessary but I did it.

    7 disconnected all perihpericals with battery and charger.

    8 disconnect the HARD drive

    9. connect the USB on the laptop on the right side.

    10 press and hold the END

    11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

    12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

    13. After finishing laptop restarts and worked well.

  • Satellite C660 - no Internet connection after updating BIOS

    I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

    Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

    Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

    Hey Buddy,

    The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

    You can access the Internet now?
    You try to access the Internet with LAN or WLAN connection?

    Also check device manager if all devices are recognized correctly.

    > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
    You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

  • Satellite L50-B-16V - Starcraft 2 performance decreased after update BIOS?

    Hello

    I played Starcraft 2 for awhile on my Satellite L50-B-16V using average settings quite fluently, however, now the computer's performance has worsened considerably. Framerate decreases with the increase of number of units in the game, in the end that I get framerate as images 1 / 3 sec, even low settings.

    The only thing that has changed since the game worked fine, was updated to BIOS to version 2.0. Could it be the cause of the problem? And if so, is it a safe way to downgrade the BIOS to 1.9?

    Thank you.
    Karel

    Hello

    The BIOS update should not affect the performance of the game.
    But after the BIOS update you should definitely take the default settings of the BIOS (by pressing F9 in BIOS). Then save the changes and exit the BIOS.

    In addition, you must check the AMD/ATI settings in the ATI Control Center.
    As I m not wrong no you can increase the performance of the GPU but of course, it would increase GPU s heat dissipation and temperature s notebook would be upward.

  • Satellite L300 - dead after update BIOS!

    Hello!
    I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

    Thanks in advance!

    Thom

    Hey Buddy,

    It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
    However, this forum can help you:
    www.theeldergeek.com/forum/index.php?showtopic=21209

  • Satellite Pro U300 (PSU31E) standby & hibernation fails after updating BIOS

    Hello

    I wonder if it is common that after the upgrade of the Satellite Pro U300 (PSU31E) of the BIOS 2.50 at BIOS 3, 70 - Win or 3, 90 - Win, do sleep modes and Hibernate the * completely locked laptop computer? *

    After the upgrade, when I try to enter sleep or hibernation, the laptop turns off the LCD and gets locked so it isn't help to press and hold the power button, open/close the cover, press Fn - F3 or F4 - Fn, the only way is to disconnect the power supply and wait until the battery runs down, or simply be very rough and * disconnect the battery *.

    While the Pro U300 is locked, I hear that HARD drive and fans are also swivel - as soon they were when entering standby or hibernation mode. Very ugly behavior - you can FRY your laptop with something like that. I thought that BIOS 3.70 was faulty but unfortunatelly version 3.90 also worthless.

    Furthermore, I can't yet understand why large (70% of the zip file) file of the package to upgrade the BIOS (3.70 and 3.90)... is the portable other flashers log file?

    Your ad, I understand that the screen does not wake up after its entry in the standby or hibernation mode.
    Am I wrong?

    I noticed that Toshiba has released a new version of the Intel graphics driver.
    At this time the update is 02/20/08 and the version is 6.14.10.4831.

    Maybe you should try to update the display driver too check to see if it would help to get rid of this annoying display problem

    I recommend to remove the old version of the graphics driver first, then install the new downloaded driver.

    Mate good luck

Maybe you are looking for

  • Cannot find the file of flag in the mail on iOS931 application...

    I use iPhone5s with iOS 9.3.1 but I I can not find the folder flag in the mail application after that I did everything correct step... Help, please!

  • Qosmio X 770 and Windows 8

    Just made an upgrade, but it was a clean update (keep nothing etc). NA not check here first which was dumb, but now I want to get my laptop works well. Surprised that there is no available win8 driver so should I download and use the #64 bit win7 dri

  • Impossible to allow

    This is the message I got on my dashboard since last night after that the servers had their maintenance. "Impossible to allow:no response from the server. All the dash back to normal on their own since the maintenace, or has somebody had to do someth

  • Problems of construction AOSPS for D6603...

    Hello I have followed the steps and can not do build. On stage: source build/envsetup.sh && lunch I select d6603 (option 17) Then run make and get: including ./vendor/sony/leo/proprietary/Android.mk ... build/core/base_rules.mk:154: *** vendor/sony/l

  • The missing graphic audio meter screen?

    The audio graphic counter on the screen disappeared. The slider and mute key still work you just can't see the bar counter or red indicator for mute. How can I fix this?