Step 3 Setup fails and restarts repeatedly.

Similar Questions

• Apple logo on the iphone 6 more then shuts off and restarts repeatedly

  It started with the phone restart a couple of times, but now when I turn it on the logo apple appears for a few seconds then the phone turns off, I tried to restore it with iTunes for the last 4 hours and nothing works

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• tried to install snow leopard 10.5.8 but he failed and restarted now, I can't start 10.5.8

  I purchased mac snow leopard and tried to install it on my mac-pound aluminum end 2008, it could not install, I clicked on try again, then it restart it. It came with the screen of the language and I thought it was the clean install the way to do it, but I don't want TO REMOVE MY DRIVE because the memories of family, so I have snow leopard of ejection and tried to boot the system back to 10.5.8 but that did not work, it just turned off, so my question is is it possible to install mac snow leopard without deleting all my files, if not any other way to get all the files safe again. Please and thank you. I didn't backup:

  Oh yes and I checked the disk on boot disk utility and nothing on my drive has been deleted and yet if...

• Explorer.exe stops and restarts constantly - I have a solution but its only temporary.

  Had no problems with Windows 7 for a year. Then recently explorer.exe stops and restarts repeatedly, over and over again each 5-10secs. Our Event Viewer error is a .dll module in User\User blame name\Apps\Local\, called eciwavatebiwe.dll. I find this .dll and when I rename the judgment falls down, but instead I raise an alert at startup that windows does not find this file (I click just the red x).

  I used virus and sfc/scannow ladies, but no error reported.

  The file in question announced swapper Windows NT caps lock ctrl but Googling is not this .dll anywhere.

  Any ideas what going on?

  Chris

  eciwavatebiwe.dll is a virus what I see. Remove it and start regedit.exe and findeciwavatebiwe.dll and delete everything you find.

  Also scan your system with your scanner, AntiVirus and Malwarebytes' Anti-Malware (http://www.malwarebytes.org/mbam.php).

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• Try to install 9 Captivate. Mac has been extremely slow, so I had to stop and restart early in the installation process. When I try to open the installation program again, it reads "Setup Failed To Initialize. Please download Adobe Support Advisor to dete

  Try to install 9 Captivate. Mac has been extremely slow, so I had to stop and restart early in the installation process. When I try to open the installation program again, it reads "Setup Failed To Initialize. Please download Adobe Support Advisor to detect the problem. "But there is no longer the support Counsellor. How to solve this?

  Go to Adobe Captivate

• KB2596764 security update fails with 80070643. A ran "FixIt" and restarted OSE but no luck.

  Try to install the update of security KB2596764 (for PowerPoint 2007) but it fails with 80070643.  I ran Ran "FixIt" and restarted OSE as instructed but no luck.  The error still occurs.  What else can I try?

  Hello

  What Fixit did you run?

  Method 1:

  If you have tried the fixit following article form, then try the steps to repair the. NETFramework installation and check if it helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  Method 2:

  You can also try to download and install the standalone update package and check.

  Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

• Windows 7 stuck on step 3 of 3 loop and restarts

  I tried to upgrade from Windows 7 to Windows 10.  Unfortunately, he has been blocked on step 3/3 was updated.  It will reach 35% complete and restart itself one and repeat the process.  I tried several times to hit F8 to restart in fashion advertising safe that does not work.  I would like to restore to a point before the conversion attempt for Windows 10 or at least be able to delete the data on this computer before I need to erase and start over.

  Help, please!

  Hi, Jasmine!

  Thanks for posting your concern. In order to isolate it further, we will have to ask you a few questions. Please see below:

  1. don't you disable your firewall / antivirus before installing the Windows 10 update?
  2. have you tried disabled Windows Update components?

  Here are the reasons why Windows Update cannot move forward. To solve the problem to your component of Windows 10 update, please visit this link: How to reset the Windows Update components.

  Keep us in the loop for any update.

  Thank you!

  If you find this article useful, please click on mark as answer.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Windows update happens in step 3 and restarts continuously in step 3

  April 8 (give or take a day or two) a new update on my computer, Vista Home Premium 32 bit - it updated fine until step 3. It is stuck at 0% and restarts every 5-10 minutes and attempts to load step 3 again and again until that you turn it off. Once he turns back he continues the same attempt again and again.

  How can I fix it? WITHOUT losing all my files?

  The link below has options to solve your problem of loop.

  >>

  UTC/GMT is 01:59 on Saturday, April 14, 2012

• He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  Nevermind I figured it

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Why windows xp just turned off and then just restarts, repeatedly?

  Help, please! No apparent reason my pc under xp, everything stops and restarts. WHY?

  There could be several reasons.  Assuming that when she stops seems to be totally random and not caused by a particular program, the most likely cause is overheating.  Download and run ' CoreTemp"which will display your CPU temperature.»  You will see if it's not too hot.  If it turns out that you have a temperature problem, the two most common causes are a CPU fan that has stopped work and excessive dust inside the machine that coats the components and inhibits cooling.   Open your file and get. / clean the dust bunnies.

  Other causes include bad RAM.  While you are there, replace the RAM modules.

  HTH,
  JW

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.