Step by step in the cvi dll

I want to run, step by step in a function that is located in a cvi dll. Is this possible? I did a cvi debug dll that I used in my project of TestStand. But I fail to run step by step inside the function in the dll.

OK, it works. Thank you very much.

Tags: NI Software

Similar Questions

  • Reliablity of the use of the CVI DLLs in testStand

    Hello

    I wrote a file .dll using the ICB and tries to use the functions available in aid TestStand. I get strange errors, not always but when I run TestStand. Here is my code in the dll.

    int GetAverage (double* aBuffer, unsigned int aSize, double* aAverage)
    {
        double total = 0;
        enum t_eErrorCode eErrorCode = 0;
    
        if(aSize <= 0)
        {
            eErrorCode = eARRAY_SIZE_ZERO;
            goto Error;
        }
        for(int i = 0; i < aSize; i++)
            total += aBuffer[i];
        *aAverage = total / (aSize);
    Error:
        return eErrorCode;
    
    }
    

    He sometimes throws only an eError_SIZE_ZERO error, but when I checked in the debugger TestStand, size sent to the function was not a nullity (see attachment).

    What can be the reason or what I am doing wrong?

    Thanks in advance,

    RB

    Hello

    This link should help you with debugging.

  • CVI DLL using the reminders of Message Windows

    Background:

    I had a CVI wound around a third-party DLL executable application.  Recently, I've built a few LabView modules and wanted to use the features in the code of the CVI.  I deleted as much as I can from the code of the CVI and built a DLL out of it, so now that it's a call to a third party DLL DLL of CVI.  The third-party DLL uses windows messaging to communicate with the CVI DLL.  I wanted not to re - write the functions already developed in CVI in LabView (much too much effort).

    Problem:

    The problem is windows messaging in CVI uses the InstallWinMsgCallback and binds it to a group of experts.  The events are not processed until you call RunUserInterface(). RunUserInterface does not return. Therefore, any LabView module that loads this DLL crashes, waiting for the DLL back.

    Does anyone develop a CVI DLL, which uses internal reminders, which can be called from an external process?   Anyone have any ideas on how to get around?

    Daniel,

    In fact, I came across the solution even before that you posted.  One thing I noticed however was that it was a little unpredictable when the message would be received.  It turns out that defining the InstallWinMsgCallback to intercept that in_queue worked without needing a processsystem looping events.

    -Bryan

  • difference of initial value of string between the steps in the process and an external instance of LabWindows/CVI

    Hello

    I'm curious to know what I see using TestStand, LabWindows/2013 2013 with regard to initial in TestStand string values when you perform the steps in the process or an external instance of LabWindows/CVI.

    I have a step (CVI) string value that is used to check an array of characters stored in an EEPROM to test.  I pass on the Step.Result.String in the CVI by reference.  I then read the table charater of the EEPROM in the chain (Step.Result.String).  The string is then compared against the limit as specified in the test step breast.

    When I run this test step to perform the steps in the process selected in the popup Configuration of the adapter of LabWindows/CVI, it seems that the memory allocated for the string is filled with null characters.  Which is what I expected.

    When I run this test step to execute the steps in an external instance of LabWindows/CVI iselected of the Configuration of the adapter of LabWindows/CVI popup, it seems that the memory allocated for the string is filled with something else.  That is not what I expected.  For example what I see in the memory, it's the first characher is one byte NULL but the remaining bytes are some other values, as shown below:

    F0 00 AD BA 0D F0 AD BA 0D F0 AD BA 0D AD BA 0D AD BA 0D BA 0D AD F0 F0 F0
    F0 AD BA 0D F0 AD BA 0D F0 AD BA 0D F0 AD 0D AD BA 0D AD BA 0D F0 F0 F0 BA...

    In my code I make sure to write a null character in the following location table charater I just write in the chain so I have no problem with the test is working properly.  I have remove the writing from my code null character and was able to verity that the test passes when executing the steps in the process and fails during execution of the steps in an external instance of LabWindows/CVI.

    The returned string contains what I wrote for her, and then the rest of the string is filled with the values that are in the memory allocated for the string.

    Here's my Question: is this the expected behavior for the original string values in TestStand between both types of stage performances?

    Thank you

    Chris Young

    In general teststand not Initializes the unused portion of the string buffer, so it is expected that the values of the memory after character no endpoint will be different, or even to each call. If you happen to be get zeros after the null terminator which was probably due to random character (i.e. the memory allocated just arrived already having zeros in there) or perhaps a debug setting you use perhaps in the Visual C runtime (if you are debugging the process in visual studio or modify visual C runtime heap parameter). TestStand is not initializaing memory after the null terminator character in both cases (I checked the code).

    -Doug

  • How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

    How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

    You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

    For Apple ID - Apple Support two-factor authentication

    You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support

  • I'm following Firefox for XP Help on 'Clear cache and cookies.' When I opened Firefox &amp; follow the steps in the help (click on history, tools, etc.), these aren't active links. I'm clicking on a help screen; No actions are performed. ???

    (On the desktop) When I opened Firefox & follow the steps in the help (click on history, tools, etc.), these aren't active links. I'm clicking on a help screen; No actions are performed. Cache and cookies are not deleted.

    Make sure that you are not Firefox running in permanent private browsing mode.

    To view the history settings and cookies, choose:

    • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
    • Uncheck the box: [] "always use the navigation mode private.
  • Satellite A300-1RZ - stucks Windows 7 upgrade on the first step of the installation

    Hi all

    I'm Italian, I an A300 Satellite with Vista Home Premium I paid 30 euros for the free upgrade to Windows 7, which reached my House yesterday. I got 2 DVD:
    -1 to 'prepare' my phone: * TOSHIBA UPGRADE DVD *.
    -1 upgrade operating system: * WINDOWS 7 HOME PREMIUM UPGRADE DVD *.

    + The first step: + use the first DVD: all right, "the system is ready to install Windows 7, insert the second dvd. When I insert the other, I accept the license and after that, the first step of the installation: * "check system compatibility."
    * These steps is my problem.*

    I reworded more than 10 times the praxis but it blocks at this stage, I left the laptop at this stage, throughout the night, but today morning she was always there, no progress, it is clear that there is a problem, but I do not understand if it depends on my cell phone or on the DVD.

    I tried to boot the laptop with Windows 7 DVD inside, start the system by the DVD, but it ask me to format the partition where are the files of vista and is not an upgrade. I bought an upgrade just do not remove previous programs and do not format the first partition of the drive of my laptop.

    How do, which can, I turn to?
    Does anyone have the same problem?
    Does anyone know to escape?

    thanx 4 your answers

    A Dread

    Hi a Dread

    That s strange because I didn't have a problem with my Toshiba upgrade disk. Everything worked fine! :)

    I put t know if you read this, but here's an update statement step by step:
    http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

    As you can read before the upgrade, you need to remove some programs if they are installed on your computer.
    Check this box!

  • Arm movement is recognized as steps in the application of the activity on the Apple Watch?

    Happy new year to you all

    I am the happy owner of a Apple Watch OS2.1 running, but I think that the watch records the movement of the arm as the steps in the
    Fitness app?

    Today I was at my desk and moved no more than a few times get coffee (10 steps), the application of the activity
    the clock tells me that I moved 1 659 equal to 1.47 KM steps and I have
    a hard time to see this may be correct (work of my office at home, so basically
    went to my room to my office (max 50 markets)

    I calibrated the watch with 2 x 20 min outside walks with my phone with me and correct installation
    the data GPS on my phone, but the problem is the same, someone else has the same type of questions?

    Look forward to the thoughts of entry or comments, you may have.

    Hello

    Happy new year!

    In addition to the calibration of your watch, it is also important - for more accurate estimates of activity - to ensure that your personal information is correct. To verify that it was entered correctly and update over time:

    -On your iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).

    However, it is possible that the numbers you quoted are correct. Even with a relatively sedentary lifestyle, regular movement around the House or at work can soon add up.

    To check the data behind the totals:

    -On your iPhone, in the application of health (not the application of the activity), go to: health Dats (tab) > Fitness > steps.

    -The graph shows your steps per day, week or month (use the tabs at the top to change that).

    -Press show all data to view data for each day.

    -Tap on a day to see each data point, along with the data source (for example, iPhone, Apple Watch).

    When you present data in the dashboard, where data for any particular measure were available from several sources at the same time, the only health of them, app chooses automatically in order to avoid double counting.

  • PC (Win7 64 bit) freezes completely after some time due to the CVI 9.0.1 32-bit application: question in cvirte.dll

    I have a strange problem with my app CVI. After a while, no constant time (especially on a day or two), the PC freezes completely when running my application. Examine the system event logs, I see a lot of entries from the CVI, sometimes 8fois per second!

    Above all, it looks like the following:

    The description for event ID 0 in source CVI could not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    [14:18:42.389] [GetLWMessage] [FATAL] [.. \jsource\jn_msgs.c:672 assertion failure]: WRONG (error in the message handler: code #12689 unknown message received)

    Although the system event log is set to a size of 20 MB only and the fact that it is automatically overwrite (FIFO) itself, the PC won't be able to do in the face of this large amount of entries in line waiting.

    I searched the internet but found absolutely no clue. I searched then through my code using find in files and finally only found the following within the cvirte.dll sequence when you use "*." "*" as file extension filter:

    .. \jsource\jn_msgs.c ConvertMsgText error in the message Manager: unknown message code #% ld received GetLWMessage

    Why exactly what the system event log tells me. I wonder that there are some things Java in a related CVI runtime dll

    Know someone, any idea how I can fix this problem?

    I tried to run my application using WinXP SP3 compatibility mode, but this did not help.

    I'll try to refine the question. I will also try to recompile my application using CVI2015

    The application does not generally crushed. There are different configurations of my tool where he works a lot of days. So, I have to determine the exact circumstances. Also there is no memory leak, so does not unnecessarily increase consumption of RAM during execution.

    Any help much appreciated

    Thanks and greetings

    Hi Kyle,.

    Thanks for your response!

    In the meantime, I managed to solve the problem. Checked the date and version of the DLL runtime on the target PC, I found that they differ runtime DLLS that have been installed with my application using the distribution kit. After the reinstallation of the application, there was more no new error event log entries, so this solves the problem :-)

    Only, I wonder where these DLLs from...

    Thanks and greetings

    Manfred

  • How to create VI execution asynchronous step using the API

    I want to create a "run way asynchronous step VI" using the API TestStand in LabVIEW.

    Navigation on the details of the step and the properties of the object, apparently, that it is a type of 'special' step that is actually a SequenceCall.  However, I don't see how to access the data contained in this type of step.  I enclose my current VI used to 'Browse' the data for reference.

    Please advise on how to create this step.

    Thank you

    Hey LVB,

    I'm sorry, I didn't know that you always wanted to use the "Use the Prototype sequence" checkbox option.  In this case the attached code should demonstrate how this can be accomplished.

    Thank you

  • Use the same code module to multiple steps in the sequence

    Hi all

    I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands.  I got regarding the appellant the VI in a new thread so that it can be executed asynchronously.  I can run the simple sequence and it will indeed open the VI and move to the next step.  When I close the VI manually from the front, the TestStand sequence is completed, as planned.  So it turns out that I have a lot more work.

    My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings.  If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance.  My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings.  In addition, I don't know how to proceed.  Please notify.

    My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results.  If I'm understand how TestStand is supposed to work, please let me know.

    Thank you

    GSinMN

    What I do is use a queue to send data to the asynchronous VI.  So he can run and whatever, but also receive orders from the queue.  I use a motor of Action that contains the reference to queue and sends the commands.  If you really just call the engine of the Action of your sequences.

  • can see us line numbers next to each step in the sequence file?

    Hello

    I have a file of sequence having 600 steps. I would like to know is there any option to the test to set number for each step in the sequence of line editor so that it is useful for the review.

    Example:

    1 Action1

    2 Action2

    ............

    600 Action600

    Kind regards

    Krishna

    Krishna,

    If you want just to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar.  It shows you how many steps there are in the sequence, how you have selected and the index of the selected steps.

    It is also possible to display the information in the view of the steps in a column, if you are ready to create a new column.  Follow the instructions in this KB to see how to create a new column:changing the properties of columns in the viewport of execution TestStand sequence editor.

    One of the types of columns is Index. Just set your column of this type and you'll see step index as shown below.

  • Display dialog popup to step to the sequence type

    I have a type of step in LabVIEW with module parameters and variables of the step which must be installed to configure this step. Can I do to display the dialog box pop-up to enter the required values for the time when I drop the step to a new sequence type?

    Examples: 1. I have variable TestID of steps which must be installed. Pop-up dialog box is more convenient that is variable and by searching the TestID in the tree.

    2. I have one type of step that makes different actions depending on the parameter enum in the LabVIEW module. This is set by default in steptype. I would like the name of the step in my sequence to match the value of the enumeration. Something like RunState.Step.TS.SData.ViCall.Parms ["Update Configuration"]. ArgVal in step step Expression name by default type help and displays the text of the enum as a stage name, when I drop the type of step of the sequence. But change the Configuration parameter update during this step to another value is not followed by changing the name of the step, looks like step default step name the type Expression is evaluated once what stage is created from the step type.

    Yes, you can add code to your step type that is called whenever an instance of it is inserted into a sequence. Create a customized type of step step and name it OnNewStep. TestStand will then call this substep whenever a new instance of the step type is inserted into a sequence.

    The default expression is evaluated only when the step is inserted, that is correct. I don't know in a way that you could make the name of the step automatically updated based on the value of the parameter of the module planned for it. You could write some kind of tool that updates the names of these steps in a sequence and run that, periodically, but I don't think there's a way to have your code directly from a user action to specify a code module. You can create your own user interface to specify things on the steps by using a publishing step and this edit substep could update the name, but I'm not sure this is a practical solution for your particular use case.

    Hope this helps,

    -Doug

  • How to get the result of the test of CVI DLLs in teststand!

    I write a driver dll to test a source, I want to get the tension of world SERVERS (the instrument of the RS) and I used to call DLLs that written by CVI, teststand

    My question is what is the best way I can get the result of the test and show the user to teststand. the code below is fair? When I used to call this dll document, teststand

    "" I just get the result by setting in TS.this is a good meathod, and what should you do in teststand, I put the "outputVoltageV" point to an object?

    /*===========================================================================*/
    / * Function: read voltage/current output * /.
    / * End: this function returns the output and actual output voltage * /.
    / * current instrument.                                      */
    /*===========================================================================*/
    ViStatus _VI_FUNC rsngsm_datReadOutput (ViSession instrSession,
    ViPReal64 outputVoltageV, ViPReal64 outputCurrentA, ViPBoolean statusPeakCurrent)
    {
    ViStatus rsngsm_status = VI_SUCCESS;
    Bruno buf [BUFFER_SIZE];
    ViInt32 retCnt;
       
    FMT (buf, "%s<>
    If ((rsngsm_status = viWrite (instrSession, buf, NumFmtdBytes (), & retCnt))<>
    Return rsngsm_status;
           
    If ((rsngsm_status = viRead (instrSession, buf, 50, & retCnt))<>
    Return rsngsm_status;
    If (Scan (buf, "%s > %f [p2];")) %f [p2]; %i [b2] ", outputVoltageV, outputCurrentA, statusPeakCurrent). = 3)
    Return rsngsm_status;
           
    Return rsngsm_status;
    }

    sean_tan,

    Yes, you just pass a value of digital TestStand (e.g.; locals.number).

    If you use the adapter of the ICB, it might make more sense that you can use the Flexible DLL adapter for this type of function, that you do not use the standard settings of tTestData and tTestError. While TestStand will correctly recognize the function prototype, you want to make sure you that include the type library of your function Panel (you will need to create one if you have not already done so) in settings target of LabWindows / CVI-> type library.

    I hope this helps.

    -Jack

  • Sims3: someone can give me a few steps for the sims3 on a windows vista installation?

    Can someone give me a few steps for the sims3 on a windows vista installation?

    Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.

    During the installation you will be asked for your key you will find on the booklet inside the DVD case.  It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.

Maybe you are looking for