Step property loader to load all limits in all sequences in a Seq file

Hello

I have a Seq file. There are several sequences in this file. I can export all limits in all sequences of this file as an Excel file.

My question is how to import all limits in all sequences of this file by using step property Loader. I am attaching a file seq example below (version TS3.5). Will you please show me an example to do (i.e. *.seq or screenshots are appreciated.)

From the link below, it shows that for import limits in each sequence, there must be a property Loader step in each sequence to load limits for this specific sequence. But it's annoying and not effective because the same step is performed repeatedly.

http://forums.NI.com/NI/board/message?board.ID=330&requireLogin=false&thread.ID=6522

We hope to hear from someone soon.

Concerning

Lee

Hello

The Committee for dialogue on what I was talking about is the feeder of property change (see table). Typically, you use this after you insert a step PropertyLoader Type in the installation of the PropertyLoader step sequence statically. General, you set many of the properties statically and then change one or two of the properties programmatically. Unless of course you're generating the entire sequencefile programmatically.

The properties that you need the installation would be Step.Sequence = "", but also you must set Step.UseCurrentSequenceFile = True.

Hope this helps you.

Concerning

Ray Farmer

Tags: NI Software

Similar Questions

  • Property Loader doesn't Import ConditionExpr (loop Conditions)

    Hello

    I am finishing a project that generates and distributes my test sequences automatically.  It uses the property loader when running to get the parameters of the current stage.  Everything works fine and my process is fully automated, but it can't import the ConditionExpr, property (conditions of loops).  I have about 20 other properties than any thin import, but I cannot do anything with a timing and if I try, I'm stuck in an infinite loop.

    I have attached a fake movie file and the corresponding CSV.  The stage names are weird, but that's just because of how works our database for results files.  Each event is just put at the present time, a loop until specified elapsed time and then compare.  Unnecessary test, but it illustrates the problem.

    My tests build dynamically, so there are some types of common step - each step is set by default to a common version - they updated since the shipper of the property.  Any ideas would be extremely useful.

    Thank you

    Bryan

    Hello Bryan,

    I think I've discovered what's happening. I watched your properties file in Notepad and noticed that the FileGlobals.Duration< 5="" did="" not="" have="" quotes="" around="" it.="" this="" causes="" teststand="" to="" evaluate="" the="" expression="" when="" it="" is="" being="" imported="" which="" causes="" it="" to="" be="" set="" to="" true.="" if="" it="" has="" quotes="" around="" it,="" teststand="" will="" still="" evaluate="" it,="" but="" it="" does="" so="" by="" removing="" the="" quotes="" and="" then="" putting="" the="" expression="" in="" the="" while="" loop.="" i="" am="" not="" sure="" what="" caused="" the="" file="" to="" be="" exported="" this="" way.="" i="" was="" hoping="" you="" could="" walk="" me="" through="" the="" steps="" you="" did="" to="" export="" the="" file="" so="" we="" can="" try="" and="" see="" what="" might="" have="" gone="" wrong.="" also="" what="" version="" of="" teststand="" are="" you="">

    When I exported the properties I went through the following steps:

    1. Select Tools' properties of import/export

    2 choose the destination for my file and format

    3 went to the tab properties and all of the exported properties

    4. press for export

    A workaround solution that you can use right now is to go into your properties files and manually put in quotes the expressions for the While loop. Look forward to your response and have a great day!

    Best regards

    Adam G

  • HTTPS Web site does not load all the content.

    Hello
    I have a https site that don't load all of its content, even after I admitted that all of the content could be loaded.
    Despite this, the content of the site remains the same.

    I installed Firefox today, so it is impossible that the components of changed evironment.
    I published cookies, buffers, etc. several times history
    How can I solve this annoing problem?

    Burst

    Thanks for reporting on your results.

  • Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

    Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

    I have just three pictures I want to load my usb for my macbook camera style

    Hey FYI Apple

    Where is edit?

    This is how it should look.

    Why does he want iPhoto to load every photo, my camera never had (since the update) when I just want what he upload 3 photos?

    I have just three pictures I want to load my usb for my macbook camera style.

    The camera has only 3 pictures on it, but iPhoto seems to have a memory of each photo, that I took because I've updated to the latest iPhoto and it wants to load on the page which is for the camera.

  • Property Loader: Array of strings

    I'm looking for an example of use of stage property loader to load an array of type strings labView.

    Not much in the reference manual...

    Thank you

    JVH

    The best way seems to be to export it first.

    In the variables pane, I created a local array of channels and populated values everything in it.

    Then Tools > import and export properties - Source/Dest tab, set the location of the data to file and traveled in a file name. I used delimited by tabs to Format so I could just type one string per line w / no qoutes. Properties, tab selected table Local, I created. Then click on export and the file was created. Open the file, copied and pasted to other cases and modified accordingly markers.

    Thanks to Chris OR Austin.

  • Problems to show the driver IVI and property loader error messages when you use a type of operator interface

    I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

    Hello, Johann,.

    I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

    concerning

    Samuel

  • Not able to load all the applications at the start?

    When I restart my window, it will fail to load all the apps and constantly hear a click click of hard drives

    After reboot XP several times, I get a message as follows

    Playing a disc error has occurred

    Press Ctrl + Alt + Delete to restart

    After that

    NTLDR is missing

    I install XP on drive C and all applications on the D drive, how can I know which drive to get error?

    When I go into my BIOS and see my drive C is not detected.

    To make a virus? or hardware fails?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions

    Looks like your drive is toast. The clicks that you hear, it's very likely the arm broken in the hard drive.

  • Error codes Vista 65535 and 0x8000fff when you try to load all the files, folders or applications

    I get these two error codes 65535 and 0x8000ff, I'm running Vista 32 bit, with only 1 GB of Ram and use a memory stick as a RAM boost option. System starts as usual, I can connect to the Web, but don't load all files, folders and applications. I have icons on the desktop, but like I said nothing loads. have you tried Live One Care safety scanner, downloads, but used to run, just get the codes above, no matter what I try. In desperation I tried a complete reinstall, still did not work and can not find the productkey.

    Thanks for the reply, we, ve decided that the hard drive is shot to pieces, and will install and old windows xp disc i've got. to solve the problem.

  • files and folders: How can I load all my files and folders to my new account of my external hard drive?

    Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

    Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

    Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

    This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

    Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    I also found the following (but don't know if it of true or not):

    1. after the start of "backup and Restore Center."

    2. I chose "Advanced Restore"

    3. I was did not an administrator password... maybe because my account is an administrator account.

    4 choose "files from a backup made on a different computer.

    5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

    6. under the drop-down list box, select your drive/partition and continue

    7. If all the backups on your drive, it will show a list of them.

    8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

    9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

    10. and you press "next".

    11 guess what... no error!

    12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

    13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

    14. so that the next time see a mistake, try to continue with him... ;)

    I don't know if this will help, but it does not provide much information about the process (when it works).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • do I need to load all fonts when I turn on my computer?

    do I need to load all fonts when I turn on my computer?

    Yes.  There is no way to select only some of them to load.  If you have too much, try deleting some to make more room.

    I hope this helps (even if it wasn't what you wanted to hear).

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Load all the values of ADF select several component shuttles

    Hi all

    I have a selectmanyShuttle ADF component that was related to a view object. The result set has about 70 values of which only 25 are displayed in the component of the shuttle.

    I am also pre-population of the selections... but I get the string is is not in the selectItems because its sitting in 50th position and can not find the same in the box to the left of Shuttl.

    In any case do load all 70 values in the component of the shuttle?

    Thanks in advance.

    Try pageDef. to select the iterator and RangeSize =-1 set

  • All of a sudden my Elements 7 won't load all the video files not saying not supported

    Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

    If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

    In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

    If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

  • XI player suddenly stopped to load all images into pdf files.  No idea why?

    XI player suddenly stopped to load all images into pdf files.  No idea why?

    Try to edit > preferences > Page display > Page content and information and remember that "Show large images" is checked.

  • The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when selecting th

    The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.

    The problem does not appear, if PH 13 items is run in administrator mode.

    The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.

    Please, advice how to fix this problem? Perhaps, there is patch or update available?

    I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.

    Scratch disk settings can be found under preferences / Performance.

  • How to load all the data without uncheck Journalized data only option?

    Hi all

    Currently, I have configured an option only logged data for many game data and interface.

    But I need to load all the data (once) without clear logged Data Only. After that it will work with the CDC.

    Please help me on this.

    ARO
    EBA

    Hi Eba

    Another way is to copy the source data to another table (two copies).
    If you have 10 source table and then create another 10 tables in doubles in the backend.
    Now truncate these original paintings. Then insert the data in table duplicated in the original table. Now CDC will detect these are inserted.
    But I guess you have more than 300 paintings, which is again difficult to manage.

Maybe you are looking for