Still no USB 3.0? (E220s)

Just noticed that many have concluded that the new E220s will not have usb 3.0.

This must be a joke? Please tell me this is a joke ><>

Hello mate,

The E420 is not usb 3.0 ports, I see not the E220s have some.

If you want usb 3.0 is W or T420s series that has just 1 usb 3.0 port.

Tags: ThinkPad Notebooks

Similar Questions

  • error 0x80071ac3: difficult to copy the files from my old, but still working, USB

    I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

    I have just brought a new USB and can't copy files from my old, but still function, USB. Both are Kingstons not that it matter. I get the object from the error message "the volume is dirty" etc. I ran the disk of the property toolbox check both via the command prompt "chkdsk x:/F and / r." I still can't copy a large number of files.

    Hello

    Files that cannot be copied are in bad clusters.

    Try running chkdsk x:/b

    The /B switch will cause the disk check to reassess the bad clusters and try to fix them again.

    Let us know the results.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • After shutdown still power USB ports

    When I used Bootcamp and Windows 10 on my iMac 27 "(end of 2012), the USB ports are still less power when I shut down the computer to Windows. A USB powered external hard drive and a USB hub are still active. When I shut down the computer from Mac OS X ports are powerless. Why is this?

    Can you check Windows quick start?

  • VM Server 2.1 but still only usb 1.0?

    Hello!

    Passed to VM Server 2.1 in order to get support USB 2.0 - but after I connect a USB device, I still have the message "this device can perform faster..." »

    I thought that support USB 2 is available in VM Server 2? Is there something I have to do to activate it?

    See you soon

    Hello

    Virtual hardware version 7.0 for USB 2.0

    Please check if your VM hardware version 7.0 virtual or try to upgrade virtual hardware

    If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

    Prakash

  • VMWare Fusion 7 and still no USB 3 drivers...

    I'm a little disappointed that even after upgrading from 6 to 7 that I get always no VMWare USB 3.0 native support is Windows 7...

    I don't know if they have it works for Windows 8.1 but certainly, it does not work for my main Windows 7 VM.

    The case is really technical over an entire year, it would not be implemented in 7? Help me understand.

    Disappointed...

    P.S. If anyone has found a solution, please you intrigue me.

    kungfuu72 wrote: help me understand.

    This topic has already been covered ad nauseam!

    The bottom line is Windows 7 not delivered with the native USB 3 support for skins, and Microsoft has not provided any service pack or upgrade to Windows 7 to other native USB 3 support.  Therefore, it is a matter of Microsoft not a matter of VMware!    VMware choose that support the native functionality of the OS and Windows 8/8.1 provides the native USB 3 support of skins and as such VMware support USB 3 in Windows 8/8.1.

  • can I load that an omni 10 threw the usb port

    a 10 omni can be charged using the usb port?

    Hello

    The recommendation is to use the charger that comes with the unit. You can still use USB port to charge, BUT it can take ages to get a full charge, and this may affect your computer.

    Kind regards.

  • Satellite L300 - Vista - Touchpad and USB mouse does not.

    Hello

    Well well after hours of trying allsorts, I post here...

    Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

    On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
    The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

    Right... I have...
    Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
    uninstalled the software synaptics via the program Panel.
    Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
    Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
    Still, the USB mouse does not either.

    Someone enlighten me please on a fix for this...

    Hello

    Really strange what s my friend because normally a touchpad driver update should solve the problem.

    In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

    Good bye

  • HP EliteBook 820 G3: HP EliteBook 820 G3 - no USB Boot

    Hello

    I have a HP EliteBook 820 G3 which was working fine a few days ago and now I can't boot from a USB key.

    I put the USB Boot BIOS and any type of USB, I try and no matter what USB Port I try I can not show USB boot F9 option menu.

    The stick, I'm trying to start is a stick of SCCM Boot to BIOS devices (non-uefi).

    I tried a fomatted UEFI, one to make sure that it was not the problem and it made no difference.

    In my cube, I have a ton of HP hardware and all begin this exact stick even without problem.

    But even if the stick did not form correctly it should still show USB as an option in the Menu start with the BIOS configured to boot from it.

    I have reset the BIOS settings, I disabled the USB Boot box then restarted and places back.

    I have flashed the BIOS to the latest version and that made no difference.

    When the machine starts the operating system correctly shows the contents of the flash player.

    Anyone have any ideas?

    Thanks in advance!

    False problem.

    A factory more reset BIOS seems to have understood that it works.

  • For HP ENVY dv6-7213nr Windows 7 USB controller

    Recently, I've killed my HP dv6-7213nr Windows 8.1 want to Windows 7 Professional.

    I tracked most of the drivers for it in various sites, but I still need USB controllers for her. The closest to the power cord works, but that's all.

    It's a USB 2.0 controller.  I looked everywhere I know online and found nothing on this subject.  Any help?  I have seen a lot of post on the decommissioning and the difficulties in finding different drivers, it's a pain.

    Thanks for any help in advance!

    Hardware IDS are as follows:

    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
    PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
    PCI\VEN_1022 & DEV_7812 & CC_0C0330
    PCI\VEN_1022 & DEV_7812 & CC_0C03

    USB 2.0 is supported by native drivers included in Windows 7. The hardware ID 'PCI\VEN_1022 & DEV_7812 & CC_0C03' you provide is an AMD USB 3.0 controller. Please try the Drivers of the Chipset AMD (USB 3.0, AHCI and Chipset) from AMD. The first driver is for Vista, 7 and 8.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Need for Satellite A60 USB controller driver

    Hello

    This is my first time here, so please forgive if I look 'amateur' :)

    I had to reformat my pc and had a hard time finding drivers.

    * I need still a usb controller driver * (code 28 in my device - do not installed Manager!). I'm looking for 2 days now and can't seem to find someone who works.

    The funniest is that one of my works of ports usb (the one on the right side), but do not have the other 2 in the back.

    Anyboday can help me please?

    Thanks a bunch

    DEA

    Well, there are no special USB drivers.
    USB drivers are part of the Microsoft Windows operating system.

    You must install Microsoft service pack 2 and should update the XP in the current state.

    Best regards

  • Failure of USB ports after installing HP PSC 2510 wireless

    Just installed a HP PSC 2510 printer / scanner by using the wireless network on a Toshiba Satellite P10 using Windows XP Home SP2. After rebooting the system, all USB ports not recognized by any device. Assistance service HP told us to uninstall SP2 that we did, but still no USB.

    Have checked to see if all the USB drivers are on the computer and they are. Have uninstalled and reinstalled all USB drivers without success. Still no recognition for any device.
    Have checked to see if THE system BIOS is enabled - it is!
    Help! Any ideas?

    Hi sax,.

    First that I want to know y at - it problems with your HP printer. You can print all your documents? You use the printer for wireless data transfer or you make the USB connection?

    If I understand you right in Device Manager there is no problem, but you cannot use the USB Ports. What are the USB devices was not recognized?

  • xw6400 workstation: USB ports do not work

    Non of my USB ports work. I tired everthing but always without success. In the end, I removed microsoft 8 and installed a new, but still my USB ports do not work. Motherboard is HP E93839

    Anyone know how to repair or fix this problem please?

    Concerning

    Thank you, Mohammed, but I already did everything on the Microsoft Web site. The problem is the motherboard no software issue. I plugged in the motherboard main power power off and waited 5 min the reconnected and it started working.

  • swap USB DAQ

    We use DAQ USB-6289 devices on our production floor. Sometimes operators moving from station to station as needed. The problem is that the name of the device changes when they do IE (DEV1 in DEV2). I looked at programmatically find device name of DAQ hardware in the system , but it does not consider that you might have a USB-6289 as dev1 and Dev2 but only Dev2 currently installed.

    Has anyone encountered this problem before?

    If you connect the same device (serial #) into the same usb port, you will get the same name every time.  As soon as you modify the port or device, you will get a new name.

    If your device is still a USB-6289, you could do something like this so that the device name is not so bad.  If you have several USB-6289, installed on a machine, it will choose the first market.

  • Pavilion a6120n: USB ports and slots memory card does not

    My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

    I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

    Here's what I've tried so far.

    Run antivirus software. Full scan & scan memory - no problem

    Don't scan complete malewarebytes - no problem

    I tried to reboot several times without success.

    Catering to several previous = failure restore points

    Computer restart in repair = failure mode

    Use the repair disk I did = failure

    Control the management of the power supply for each usb port see if power was properly routed = ok

    Removed the cover of the housing and carefully inspected the cables and connectors.

    Finally I tried to uninstall the drivers usb = failure

    After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

    Still no usb or memory card function.

    Any help would be appreciated

    Thank you

    MrBob38

    OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

    I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

    After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

    I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

    I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

    Thanks for the comments, and I consider this problem to be solved.

    MrBob38

  • USB and ext.hd does not, but the mouse is?

    Windows Edition home premium 2
    Acer aspire 5930 portable

    A few days ago I tried to connect an old usb that worked for 2 weeks with no problems... The computer says there was an error on the disk, then windows Explorer froze and had to reboot.  Later I "fixed" error, after many gels, but still the usb wouldn't work.  I ended up formatting the disk.  Although a still takes a long time to open and recognize the usb, windows Explorer.  My mouse is very well (connected to a port targus 4usb thing), my printer is fine.  All my usb and hard drives refuse to connect to the computer.  USB device manager says they are all "unrecognized devices" yet less than a week ago that they were all works well without any problem.

    Usb had some .f90 (fortran) files relating to certain University evaluations, excel (including some activated macro for vma), power point, word, and pdf files.
    It seems that all of my USB with fortran files most of the problems, but they all had some one way or another.

    before you say MY FILES to UPDATE... ILS ALL ARE updated TO THE FULL they may be... This is what I did the last few days.  In addition, as I'm using a proxy, this auditor boring device DOES NOT WORK on my computer.

    Also when I try to format or delete the files from fortran, it comes up with the error:
    0x8007045D i/o device error
    any ideas?

    Thanks in advance

    Hi Alexander,.

    1. what format did you try? What is a NTFS format?

    Since it is a recent issue, you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

Maybe you are looking for

  • Rate of Logic Pro... I think the move to it

    I've been a user of Digital Performer for years, but happened to be so complex, there are bugs and stability problems arise. DP7 used to be excellent, but DP9 introduced a bug in the automation of volume which made a usable and motu is hesitating on

  • Monitor is empty

    I read through the questions until I posted so I hope that this is not a matter of repeating. About 2 days ago, my monitor just delete the message no signal came then it off ~ told me that the monitor may be dead, which can happen? or I might need to

  • Pavilion 11 x 360: cannot boot from USB

    Hello I can't boot from the USB flash or disk ext USB HARD drive. How can I change the boot order? BR, Mohsen

  • Automatic duplexer on Officejet pro K550

    Automatic duplex printing unit works but will not be on double-sided printing the next duplex print job after print output. Configure whenever I need to print double-sided.

  • Is it possible to export an Excel in OBIEE 11.0.1.9 containing macros

    Hello, I have a problem with OBIEE 11.0.1.9 when I export a report in Excel that contains several sections, it merges some columns. I discovered that there is a feature to export each section on a separate page, but it is difficult to compare after t