stimulate a testing system

Similar Questions

• Deployment of a new scheme of database on a Test System?

  Hello

  I created a new MYSQL schema (on a development machine) I want to deploy a number of test systems.

  What is the best way to do it? Is there a file somewhere in the directory of TestStand I can copy?

  Thank you best regards &,.

  Don1.

  I don't think that you are correctly using the schema definition. The scheme applies only to the database. The schema does not exist in TestStand and you do not the schema port anywhere except if you want to install a new database somewhere database options for a specific read/write database schema are stored in the TestStandDatabaseOptions.ini file and you can choose to include this point in a deployment.

• HP pavilion 205t - 500 CTO: failure of DST short test system

  I recently had problems with my computer and I did a test of the system that came with the Id 9gf14k-79j87h-qffv6k-60rn03 failure. -What it means and how to fix it?

  @JockoTheTaco, welcome to the forum.

  This error message said you that your hard drive has failed.  Your only option is to replace it.  You should buy a disk HARD of the same size or larger to ensure that recovery media will work with him.

  Here's a guide to help you with the replacement.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Stress Test System

  Test a new system, purchased or built to order for hardware failures are recommended. Avoid the problems of spousal support to, or after the expiration of the warranty.

  Why is it so? Test will expose the problems of mother, graphics, ram, CPU card or driver. Hardware problems may not appear until expiry of the warranty period. Anecdotal experience indicates components fail early or give years of reliable operation for the estimated life of the component.  Stress test to check the reliability.

  Google or Bing 'computer stress tests' and try options available. There are free and commercial solutions available to achieve this. You must determine what solution is you. And you will not regret!

  Buyer beware!

  Hello jaco1x4.
  
  It's very useful advice and there is a 'stress test' built into most computers portable consumption made by HP.  It is called 'Run In' test and he will continue to test your machine until you that either stop or it fails.  This document contains more information.  The relevant section is downstairs and is called "HP System Diagnostics".

  Have a great day!
  
  EDIT: here is the same document but for HP desktop PC.

• HP NOTEBOOK: Test System quick: drive hard SMART check failed

  What should I do when my quick test of the portable system says my SMART drive check failed?
  
  Failure ID: 9LPBSK-7SC875-XD7WLK-608Y03
  PRODUCT ID: T0X74PA #UUF

  Replace the hard drive is all what you can do. This is a fairly new laptop, it is still under warranty?

• Test system has no stand A1000-G stopped

  My ZTE G-1000 entered into test mode. It shows the following message appears on the screen.

  PS

  Do not touch in the first 5 seconds

  Touch the second 5 seconds.

  ALSPS step 1 FAIL

  ALSPS step 2 FAIL

  Nipple Fail! System shutdown! (bottom end)

  Not able to get out of this mode and also not able to tab.

  Please suggest a way to solve this problem.

  Thank you!!

  Hello

  Thanks for the reply.

  I kept it running until the battery has drained. Then I plugged in the charger and the tab back. He started to work normally.

  Thank you

• HP G62: DST short test system Diagnostics failed HP G62

  Hello.

  Windows 7 x 64 SP1

  I managed the system diagnosis HP test that you can access during startup by pressing ESC. The computer passes the test of memory and disk hard test but failed the test at startup and testing of tune-up with the same error:

  DST short failed

  Failure ID: 9LNF9R-50881W-XD014J-60QG03
  Product ID: XF522EA #AB9

  What does that mean?

  Thank you for your time and your help.

  Hello

  It really sounds like the HARD drive starts to fail, then it would probably be better to replace it before installing Windows 10.

  The only other option that might be interesting to try would be to zero the drive then reinstall the original OS and see if you still get the uefi diagnostic errors.

  You have your media recovery (disks or USB key) to be able to reinstall Windows 7?

  Kind regards

  DP - K

• Price NETWORK card for the Test System

  Hello world

  I have a test with an installed Intel PRO/1000 GT PCI card system and everything works fine.

  I would like to get a few more cards to help with failure on etc, but the Intel are pro £25!

  Does anyone know of an ESXi 4 compatible PCI NIC that is cheap?

  I've seen maps around the £10 mark, but they have not been on the list of comparability.

  Thank you guys

  (Prices seem to be on the scale in the world, so if its not expensive in your country, chances are it will be cheap in mine also)

  The following lists whitebox tested:

  http://ultimatewhitebox.com/NIC

  http://www.VM-help.com//esx40i/esx40_whitebox_HCL.php

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points.

• Test system update fails on ORA-01113: file 1 needs media recovery

  I use Oracle 9.2.0.6 on HP - UX (B.11.11)
  
  I'm refreshing to a test of production on the same server system.
  
  The update fails on...
  
  ALTER DATABASE OPEN RESETLOGS;
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  
  I do mainly:
  -Place prod tablespaces in backup mode
  -Copy the files from production to test directories
  -Take prod tablespaces out of backup mode
  -pass the prod (once for each newspaper group) log files
  -copy files from archive prod to test
  
  STARTUP NOMOUNT
  
  Create control file from a copy of the prod trace file
  (CREATE CONTROLFILE REUSE SET DATABASE 'ELLTEST' RESETLOGS ARCHIVELOG)
  It works
  
  RECOVER DATABASE USING BACKUP CONTROLFILE
  -J' I grab the last log archive copied during production.
  
  ALTER DATABASE OPEN RESETLOGS;
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  I think I have I have all required log archiving prod?
  
  Any advice?

  What you're trying to do is an incomplete recovery of the database. Since the redo logs are not used in your recovery you must explicitly specify the time to stop. If you do not process assumes a complete recovery and will require a request for reinstatement of online recovery log data that you do not.
  You can use UNDO based recovery with
  RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROL FILE;
  then type CANCEL after the last active log has been applied.
  Open with option RESETLOG database. It should work.

• HP envy 15k207NX: quick test system

  What is the meaning of this qc1x71-7pp7sk-mfpwmg-60vu03 code of failure?

  Hi @Rcrentillo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15-k207nx Notebook and the QC1X71-7PP7SK-MFPWMG-60VU03 error message.  This error is failure of Quick Test on drive 1. What this means is that your hard drive may be faulty.

  I recommend the first thing to do is back up your personal data files etc as soon as you can.

  Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here's a video that might help. It shows you how to reinstall the HARD drive, which is sometimes useful.

  Here is a link to check to see if you are in warranty.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Loading test system - addition of Oracle

  Hi all
  
  I just want to add a new system of LIGHT Agent to the server from the OLT. Can someone help me on this?
  
  Kind regards
  Sagar

  Hi Sam,

  To add a new VIEW Agent System:

  Select systems in the Manage menu to view Systems Manager.

  Select the System Agent VIEW.

  Click new to display the System Agent VIEW Add.

  Enter the system name in the name field and enter the name or IP address of the system in the field host name or IP address.

  Click OK.

  Click Close.

  Note: systems and the system of groups appear in the list of tab systems generate scenarios.

  Kind regards
  Rajesh

• Files of PAG who push for still in test system

  Friends - I have a copy of an app/db prod in test. I've been consulted and saw nothing. The upper blocks were missing. So I started to CALC, his throw so much. Test PAG files. In production, I only see one file of pag with 1.5 GB. in testing so far, he made 50 GB (25 files) and still going. What Miss me?
  
  Thank you

  Yes, that's all. To take bitmap (Hey, it's your chance to try the ELA - it might surprise you pleasantly) and the size of the database will drop about the size of production.

  Kind regards

  Cameron Lackpour

• failover of transparent applications on the node test system 2 with 9i RAC

  Hi gurus,
  I'm trying to configure transparent applications on my 2 test 9i RAC node failover. 9i RAC (installed due to RAM limitations)
  
  The tnsnames.ora on node1 and node2 are fairly simple with the exception of the IP address.
  ORCL. EZHOME.COM =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.3)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ORCL)
  )
  )
  
  To test the TAF, I connect to my laptop sqlplus customer who has the following tnsnames.ora
  
  LISTENERS_ORCL. EZHOME.COM =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.3)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.4)(PORT = 1521))
  )
  
  ORCL. EZHOME.COM =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (LOAD_BALANCE = YES)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.3)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.4)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ORCL. EZHOME.COM)
  (SERVER = DEDICATED)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  )
  )
  )
  ORCL1. EZHOME.COM =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.3)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ORCL. EZHOME.COM)
  (SERVER = DEDICATED)
  (INSTANCE_NAME = ORCL1)
  (FAILOVER_MODE =
  (BACKUP = ORCL2. EZHOME.COM)
  (TYPE = SELECT)
  (METHOD = BASIC)
  )
  )
  )
  ORCL2. EZHOME.COM =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.4)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = ORCL. EZHOME.COM)
  (SERVER = DEDICATED)
  (INSTANCE_NAME = ORCL2)
  (FAILOVER_MODE =
  (BACKUP = ORCL1. EZHOME.COM)
  (TYPE = SELECT)
  (METHOD = BASIC)
  )
  )
  )
  
  Select instance_name, host_name,.
  NULL AS failover_type,
  NULL AS failover_method,
  Failed_over NULL AS
  V $ instance
  UNION
  SELECT NULL, NULL, failover_type, failover_method, failed_over
  SESSION $ v
  WHERE username = 'HR ';
  
  RESULT:
  
  INSTANCE_NAME HOST_NAME
  FAILOVER_TYPE FAILOVER_M ISP
  ----------------
  ----------------------------------------------------------------
  ------------- ---------- ---
  orcl1 sunny1pub.ezhome.com
  
  NO NO NO.
  
  2 selected lines.
  
  (1) as you can see, the failover_type, failover_method, failed_over are None, None, and no.. I searched the internet for the last couple days, but I can't find any sample files. Grateful if someone could send me an example of sample tnsnames.ora file.
  
  (2) I need to have the LISTENERS_ORCL. EZHOME.COM? What is the purpose of use / of it?
  
  Help, please. Thank you.

  Hello

  My tnsnames.ora on a client machine to a 10 g RAC, it is similar...

  ORCL =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = rac1-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = rac2-vip)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = ORCL.mycomp.com)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 10)
  (TIME = 1)
  )
  )
  )

  Only this alias nothing more.

  See you soon,.

  Rodrigo Mufalani
  http://mufalani.blogspot.com

  Published by: Mufalani on 02/07/2009 14:19

• Cannot run loop while exec from running in test system

  Hello

  Someone can tell me why the attached VI works when you run it on its own but is not when you put it in the testbed.

  I currently have Labview 8.5 and Testbed 4.1.

  When I run the VI Labveiw, I don't have to shut down windows media player exe in order to make the progress bar run, but as soon as I place the VI in testbed (hand) and run from there, the progress bar stops at zero until I close the media player exe

  I'm confused...

  Thank you

  Chris

  Hey Chris,

  Take a look at this KB, he explains the problem and how to fix.

  I also ask if you use the media player just example exe, or if you call the player in your application?

  If it is the case that I recommend to an ActiveX interface for media player because this will give you much more control.

  Let me know how you go.

  Kind regards

  John

• Layers of abstraction appropriate to the system of standardized tests

  Hello, I am working on Standardtised test system designed for functional testing of manufactured products.

  Material, a part of the consinsts system of:

  1. system test unit, which provides the power, charges, generating functions, etc. and a PXI chassis with some devices.

  2. everything is related to a test set-up through a mass at the interface of interconnection.

  3. test contains all the material customized to the DUT.

  The goal is to have several units to test systems that could be easily interchangeable and can accept any test set-up. Any test ficture should be plug-and-play capable on any unit test system. In addition, any component of the system must be interchangeable with a component identical to SW without modification and with different components (different provider, different series, different interface etc.) with the least amount of modification to SW. This requires a hardware abstraction layer. What is not clear to me, what is the recommended strategy and how the software layers should be split between TestStand and LabView.

  Assuming that the usual layers of the Test Application-> Application specific layer-> specific to the software device - plug-in-> drivers, what should go where and how it should be implemented?

  Currently, all layers are implemented in TestStand with ASL and DSSP layers more often intertwined. TestStand sequences directly access LV hardware drivers. Adding new hardware needs to edit these two layers, but exits Test Application intact, but it is clear that this approach is not well dimensionnera.

  Plase advice.

  Thanks in advance!

  IVI is a well established and documented standard. You would have to take design decisions less and less code to write. It is easy to use MAX to assign class-specific drivers. You have existing steps on TestStand to IVI. I don't see where it's more complex than from scratch.

  If you went with IVI, I would use the types of step TestStand place class functions in LabVIEW. If it was me, and using lvoop, I would create a step customized for each class type.