Stop: 0x0000007e (0xf77a52b2, 0xf7c84490, 0xc0000065, 0xf7c84190) fltmgr.sys - address f77a52b2 base at f778dooo, datestamp 480251da

Similar Questions

• STOP: 0X0000007E (0XC0000005, 0XF748E0BF, 0XF78DA208, 0XF78D9F08) pci.sys - address F748E0BF base at F7487000, Datestamp 3b7d855c

  I am trying to install windows XP Pro on a new computer.

  I get same seizure starts to install is that I published under the title.

  Help me... I'm out of ideas... and can't find answers anywhere.

  Running with

  Asus P7P55D Deluxe Motherboard
  Intel i5 quad 2.66 processor
  4 GB of ram
  EVGA GeForce GT 220 ssc edition 1 GB DDR3 video card.

  I cannot go beyond this error and cannot find a solution...

  :(

  In your case, I would like to start by #4 below.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• Blue screen * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

  I have a Hewlett-Packard HP ProBook 4510 s 32-bit with Windows 7 Home Premium and a blue screen appears always * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

  Hello

  Check with the help of HP, their online documentation and drivers, diagnostics and ask
  in their forums about known issues with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =======================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ===============================================================
  
  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See the methods of update driver generic and verify the implementation of driver verifier in the next
  Message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  Make sure you have enough disk space.

  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• wdf 0x0000007E (0xc0000005, 0x88a56c9b, 0x8afca948, 0x8afca520) 01000.sys - address 88a56c9b base at 88a 12000 date stamp 4a5bbf28

  wdf 0x0000007E (0xc0000005, 0x88a56c9b, 0x8afca948, 0x8afca520) 01000.sys - address 88a56c9b base at 88a 12000 date stamp 4a5bbf28

  BSOD happens only to reboot or shutdown.

  Hello Pim857,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following describes this process:

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• Get an error: PCI. SYS - address F76130BF Base at F760C000, Datestamp 3b7d855C

  I had to repair windows XP home because of problems does not properly. Everything is well spent up to what I have turned off the PC & unplugged to replace the battery because she would not keep the time or date that the PC was unplugged. After that I started having a bsod with the following error "PCI. SYS - address F76130BF Base at F760C000, Datestamp 3b7d855C". There is more information above this error while ensuring that the hard drive is not complete & update bios I did everything but nothing seems to be working & whenever I boot from the XP CD I get only so far this error keeps coming back. I'm out of ideas & all my experience is not to help me with this error. Can someone help me with this little problem turning into a big headache?

  Additional info: Asus M/B rejki Bios update applied, Intel Dual Core CPU E5000 @2. 60 - GHz, 1 GB ram, 160 GB hard drive 70% free, running XP Home SP3 fully up-to-date with.

  Thanks for any help on this one.

  Chris

  Hello

  You have windows XP CD with service pack 1/2 in it?

  Step 1: Using Windows XP CD with service pack 1/2 he helped little to solve similar problems. Please make sure the installation disc has service pack inside.

  Step 2: Try to switch to the original battery (if you have it yet) again to see if the problem persists.

  Step 3: If you are able to enter the Recovery Console, and then run the following command at the command prompt.

  CHKDSK /R

• STOP: 0x0000008E (0xC0000005, 0xBF9568C8, 0xA6864C00, 0x00000000) win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633

  Hi, I get a blue screen frequently with the below error message.
  "Technical information:
  A problem has been detected and windows has shut down to prevent damage to your computer.
  
  
  STOP: 0X0000008E (0XC0000005, 0XBF9568C8, 0XA6864C00, 0X00000000)
  Win32k.sys - address BF9568C8 base at BF800000, Date stamp 4ff2f633
  
  
  Beginning physical memory dump.
  Complete physical memory dump.
  For more assistance, contact your system administrator or technical support.  "
  I am using Packard bell Easynote MX45.
  XP Home edition Version 2002
  SP3
  Inter (R) CPU [email protected] GHz.
  3 GB Ram
  could someone help me fix it please.

  N

  You are better able to tell us if the problem is resolved.  Continue to run Malwarebytes about once a week.  If the BSOD ceased and MBAM does not show any other infection, you're probably good.

• Blue screen... STOP: 0x0000008E (0xC0000005, 0xBF8B6C11, 0xA9538368, 0x00000000) win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  I have a Dimension 3000 bought in 2005, upgraded to 2 GB of RAM.

  I recently implemented almost from scratch, because Opera program and profile would be repeatedly corrupted, making me lose the email. (This reappeared even after reinstall opera clean, do not use old messages or other profile files). Therefore, I restored a backup of the C: partition Ghost (there are others for my data and downloads) I did shortly after the purchase, after which I had installed only Ghost and two games (I uninstalled the games). I installed SP3 and ran Microsoft Update. I was trying to reinstall other programs that I use now. It's Rhapsody; one of my kids 'synchronize' a player MP3 Sansa Fuze with Rhapsody.

  A few days ago when closing Internet Explorer, I got a message that should be closed and I could send a report to Microsoft. It is also used to happen before, from time to time.

  Then, more recently, when I closed Rhapsody, I got a blue screen with a message that there was a problem. He said I could try to change some settings in the BIOS. I remember what happens before I restored the ghost of 2005 BU. I looked in the BIOS and not able to find the parameters referred to in (something like memory cache). I wish it were possible to print these messages on a blue screen. I didn't copy the entire message, but I write these references:

  STOP: 0X0000008E (0XC0000005, 0XBF8B6C11, 0XA9538368, 0X00000000)

  Win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  This means almost nothing to me. I hope that someone on the forum knows what this means and can suggest what could be the problem.

  So far, I have not had more wrong with Opera, so there may be two distinct problems. OTOH, I reinstalled only Opera on 10/12/10; I can still have problems with it.
  

  Hello

  Here is more information on the bug 0x8E control: http://support.microsoft.com/kb/945658/

  The 0x8E KERNEL_MODE_EXCEPTION_NOT_HANDLED can be caused by a faulty service/driver, damaged hard drive or defective display card not enough space, or memory, Hardware/software incompatibility and third-party remote control software. So to get started:

  1. test your memory. Run Memtest you can download from http://www.memtest.org/#downiso. Download the ZIP file, extract the ISO and write on CD. Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run by at least 3 passes or until it gives errors. If you have more than 1 memory module, run the test on each module separately. Try running Memtest from a cold - start unplug your PC for an hour to cool down, then immediately run memtest again when you next turn on the. This way memtest will run when the memory is cool and after the 3rd pass when the memory is hottest.

  2. update your display driver. Reference Dell seems to have highlighted 3 different models of Dimension 3000 and so there is 3 different Intel display drivers. See if you can find an updated driver on the Intel Web site. If you use a graphics add-on card try to find an updated driver from the manufacturer's website. If you have any trouble finding a driver let us know what brand and model of graphics card you have.

  3. update the Rhapsody software. (I think it's the software you using http://www.rhapsody.com/-software ?). If it's Rhapsody software I think it seems to integrate into your Web browser and it's perhaps why Opera and now IE are mistakes? You can uninstall Rhapsody for a while just to see if it is the reason for your BSOD.

  4. when the 0x8E BSOD is caused by win32k.sys, yours, is it then possible, it is caused by control software remote third. It can include programs such as VNC, PCAnywhere, etc. of Teamviewer, RAdmin.  If you use one of these programs, uninstall it and see if the PC stops mistakes.

  5 run a scan on your hard drive. You can check your hard disk for errors by going toStart ->Run -> type chkdsk c: /r -> clickOk . When asked if you want to force a sayNodisassembly. When asked to plan the audit at the next startup, Yes. Reboot your PC to allow running chkdsk.

  Alternatively, you can run a diagnostic on your hard drive. This by downloading the diagnostic program from your hard disk manufacturer. A list of manufacturers and their diagnostic tools can be found here: http://www.tacktech.com/display.cfm?ttid=287. Once more, download the ZIP file, extract the ISO and write to CD. A time written on CD, boot your PC with the CD and run the test Advanced/extended.

  Also make sure you have enough hard disk space. It is always recommended, if possible, to have at least 15% of your free hard disk capacity.

  6. Finally, take a look in your event viewer when the BSOD for possible errors. You want to look especially in the system and Application logs (and maybe Internet Explorer connects). You can run Event Viewer by going toStart ->Run -> type eventvwr.msc -> pressOk -> event viewer screen opens. If there are errors listed in one of the newspapers type them in your next post if you are not right.

  Reading your post I see 3 specific issues, that you might want to focus:

  -The memory you added (run Memtest) and hard drive (run Chkdsk)

  -The Rhapsody program - try to update or uninstall.

  -The software was initially corrupted until you make the first image after the purchase. So you just ghost the problem on.

  I hope this helps. Good luck.

• PCI.sys - address F7568303 base at F7560000, DateStamp 480252bb STOP 0x7E

  stop: 0x0000007E(0x80000003,0xf7568303, 0xF78A64A8, 0xF78A61A4)

   
  Can someone tell me what is the cause

  Hi zoom14151,

  Follow the steps in the article.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  http://support.Microsoft.com/kb/330182

• Stop: 0x0000008E (0x00000005, 0x95ae939E, 0x8a9ddc68, 0x00000000) __win32k.sys - address 95ae939e base at a 95, 20000, datestamp 4 a 856629

  error messages and blue screen

  Hello

  Update your driver, BIOS and any software of control and then work through the troubleshooting services
  above if necessary.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• ATAPI.sys - address F848359D base at F8479000, DateStamp 41107b4d

  I have this message on the 'blue screen of death '. What should I do? I'm running Windows XP Professional Version 2002, Service Pack 2, and Avast security. The computer is a Dell with a processor Intel, Pentium 4 CPU 1.70 GHz. help, please!

  Hi Rob,

  The atapi.sys is supposed to be the result of malicious software.

  ·         What is the antivirus installed on the computer program?

  ·         You receive a stop code with the blue screen error message?

  Method 1: Update of the antivirus on the computer program the latest definition updates and a scanner.

  You can also run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Method 2: Updated with the latest drivers for chipset as well as some other computer device driver updates. Log the support site of the manufacturer to do so.

• blue screen error 0x0000008E (0XC0000005, 0x00000000, 0XF84C9CAD, 0XF80787E4) & setupdd. .sys - address F84C9CAD base at F849D000, Datestamp 48025277 whatever that means?

  I was in the middle of the restoration of the system using the power of the battery only, and the battery is dead. now, he does not recognize me.and he says that he cannot access my hard drive.

  Hello

  1. What is the brand and model of the laptop?

  You can check this link:

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  For the battery issue, you can contact your manufacturer.

• KERNEL_DATA_INPAGE_ERROR Stop: 0x0000007A (0xc0403bc8, 0xc000000E, 0xZC895860, 0 x 80779000) Storport.sys - address 80779000 base at 80744000. 49e01ef7 datestamp.

  I had this problem with my computer, running Windows Vista Home Premium 32 bit, for several months now, where it will show the blue screen of death shows the error message above. It will be at random times, it seems to just freeze and sit there for a few minutes and then display the error message. I tried chkdsk, System Restore, defragment the HARD disk, running analysis antivirus/antispyware, security scans, check the registry errors, have all the updates and everything I can think of nothing. I saved some of the previous error messages that he brang upward in the same way if they can help with what either.

  * [date - 16/06/09; 8:00p.m.] KERNAL_DATA_INPAGE_ERROR
  Stop: 0x0000007A (0xC0415BBO, 0x000000E, 0x35AED860, 0x82B76000)
  Storport.sys - address 82B 76000 based B 82, 41000, Datestamp 49e01ef7.

  * [day - 17/06/09] Stop: 0x0000007A (0xC000000E, 0x259268C0, 0xC0438A40, 0x87148EC4)

  * DRIVER_STATE_POWER_FAILURE
  Stop: 0 x 00000095 (0 x 00000003, 0x83AD8B70, 0x8560D2B0, 0 x 84417808)

  * [day - 27/08/09] DRIVER_STATE_POWER_FAILURE
  Stop: 0x0000009F (0 x 00000003, 0x8611E030, 0x8611E030, 0xAS09E5B8)

  Pura9910

  Hello

  If a PC you can try reseating all the memory cards and cables (both ends) - are not just tight - actually remove
  and replace. Remove ALL power before opening the case.

  95 is a Plug n not specified ' error to play and no help.

  9F is usually power associated - powersupply thouugh, there might be question of device or driver and antivirus related.

  7A

  Cause

  Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:

  • 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.
  • 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.
  • 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.
  • 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.
  • 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.

  These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).

  Another common cause of this error message is the defective material or failing RAM.

  A virus infection can also cause this bug check.

  Solve the problem

  Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.

  If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  Warning  If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  Solve a defective hardware problem: If the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.

  Solve a problem RAM failure: Run the hardware diagnostics feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.

  Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.

  Make sure that the latest Windows Service Pack is installed.

  If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.

  Solve an infection by the virus: Search your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  --------------------------------------------------------------------------

  It's my generic bluescreen convenience store which may help.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• KERNEL_DATA_INPAGE_ERROR Stop: 0x0000007a (0xc043be28 0xc0000056 0x039b0860 0x877c5eaf) Ntfs.sys - Address:Ntfs.sys + cdeaf ntkrnlpa.exe + d8569 ntkrnlpa.exe + 1f834 ntkrnlpa.exe + 2a89d ntkrnlpa.exe + aae05

  I'm having this BSOD error for the last 6 months. I updated my drivers, run chkdsk and recovery system and the error is not always intentionally. Please help me to solve my problem. I realized that my ntfs.sys file does not work for windows vista.

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• 0x0000007E (C0000005, 0xEB307202, 0xF7A95AD0, 0xF7A957CC) VX 3000 sys. address EB307202 base at cbeca stamp452 EB 302000 Date

  I bought a package of programs called uniblue powersuite www..uniblue.com consists of three programs:

  1 registery booster,

  2. for opdating drivers driverscanner

  3 and program designed to speed up my pc.

  I used all three programms and have had problems with my pc (5 days)

  I have since removed these programs, but still keep to receive messages from the blue screen, on the whole, I have three messages to blue screen.

  The first time that I read the script, then restarted my computer, which opened with chkdsk and all seemed well. The second and the third time a blue screen appeared, I noted the message. The second message was similar to the third, as seen in the above title.

  The blue screen appears when I try to use my windows live for a video chat, but when I restart the computer, it works fine

  If I use Youtube the picture is fine but no sound, or sound is delayed. There may be other problems that I have not yet met.

  I know very little about computers so I hope that there is a small bug stupid that someone will be able to help me with.

  I would be very gratefull for any help which is fourth to come.

  Paul

  On Sunday, February 26, 2012 15:18:15 + 0000, PaulCurranZU wrote:

  I bought a package of programs called uniblue powersuite www..uniblue.com this

  Ugh! These programs are the oil of snake and more likely to cause problems
  to solve them.

  composed of three programs:

  1 registery booster,

  2. for opdating drivers driverscanner

  3 and program designed to speed up my pc.

  I used all three programms and have had problems with my pc (5 days)

  I have since removed these programs,

  Good!

  I know very little about computers so I hope that there is a small bug stupid that someone will be able to help me with.

  I would be very gratefull for any help which is fourth to come.

  The programs have options cancel? If not, do a system restore to a
  Date of prior to execution of the programs.
  Ken Blake, Microsoft MVP

• Im trying to install windows XP on a hard disk nine and im getting a blue screen Stop: 0x0000007E

  Stop: 0x0000007E (0xC0000005, 0xF748E0bF, 0Fx78DAZ08, 0xF78D9F08)
  PCI.sys - address f748E0BF base at F7487000, Datestamp 3b7d855c

  Hi martydh,

  Thanks for posting. This message is often caused by incompatible hardware. Please remove and unnecessary for PCI cards, cards AGP/PCI-E, external devices and use only the minimum amount of RAM you can. After doing this please try reinstalling the operating system. Also check with the manufacturer of your motherboard OEM or PC to see if it's updated controller drivers, that you can use.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think